What is the profile for the roof? What is the best decking for a roof? What to do with sheets after purchase

Decking as a roofing material has been known to builders for many years. But if until recently it was used only in industrial construction, today this roofing has become very popular in suburban construction.

It is used for roofs not only of outbuildings, but also of houses. This became possible for one simple reason - the appearance has changed a lot. This material began to be made in various colors and shades, which made it possible to decorate the roofs of houses in accordance with overall design houses and the entire suburban area.

Since this roofing material has become so popular and now owners of suburban real estate are buying it, a natural question arises: how to choose the right corrugated board? It is produced in different sizes, while four indicators are taken as the basis:

1. Sheet thickness.
2. Sheet width.
3. Wave height.
4. Wave width.

There is no need to talk much about the width and thickness of the sheet, because the profiled sheet is made from galvanized sheet by cold rolling. And the higher these indicators, the better the roofing material itself, that is, it can withstand heavy loads. True, it should be noted that these indicators will affect the cost of the material.

But the last two dimensional values ​​\u200b\u200baffect both the quality of the material and all of its strength characteristics. It is the dimensions of the wave that are the determining indicator by which this material is divided into three main types.

Classification of corrugated board

The first type of corrugated board is a roofing material with the designation "H". The second is wall material with the designation "C". And the third - combined, which is indicated by the letters "NS".

As you can see, it's easy to choose. If necessary, choose brand "H", for the fence "C". Although it is today that the professional sheet of the NS brand has become the most popular as a universal type that can be used for both roofing and fencing. By choosing it, you will never go wrong.

Now we return to the dimensional indicators of the corrugated board wave, because one of its dimensions, namely the wave height, is included in the material marking. For example, for a profiled sheet of the S-21-1000 brand, the number 21 is the wave height indicator in millimeters, and 1000 is the useful sheet width.

Why useful? The thing is that the corrugated board is laid both on the roof and on the wall with an overlap on one wave. So this indicator is the coverage of the area, and not the total width of the sheet.

Experts note that two indicators in the complex determine what load a given roofing material can withstand - this is the wave height and sheet thickness.

And, as practice shows, the greater these indicators, the greater the bearing capacity it has. This means that it is possible to reduce the cost of erecting the roof lathing, that is, to increase the spacing of the elements of the lathing.

Although professionals say that it is better to save on the roofing material itself by purchasing a profiled sheet with smaller dimensions than to reduce the size of the crate.

Performance characteristics

It's no secret that the durability of any building material is one of the most important criteria for its selection. Profile is no exception. Therefore, manufacturers try to offer potential customers only products of the best quality.

And since the corrugated board is subjected to rather large loads due to the impact of natural precipitation on it, great demands are placed on its protective qualities.

Zinc protection

The production of corrugated board includes the process of cold profiling of durable steel.

As mentioned above, profiled sheets are made from galvanized sheet. It is the zinc layer that is the protection that increases the life of this roofing material. And the thicker this layer, the better. IN modern classification, where the protective properties of zinc are based, three classes are defined:

• business;
• standard;
• premium.

The class depends on the amount of zinc per one square meter material surface. In the "Business" class, the amount of zinc is determined by the range of 126-220 g. In the "Standard" class it is already 275 g. And in the "Premium" - over 275 g. Accordingly, the cost of each class is different.

In what documents are the above indicators recorded? In the certificate of quality, which is issued for each batch of the product.

Paint and polymer protection

The durability index is also affected by other types of coatings that belong to the category of protective ones. It is paint and polymer. Paint and varnish products are applied to the profiled sheet by powder spraying. This is a fairly reliable protection, in addition, the color range of the proposed paints is so wide that it allows you to choose a corrugated board for any home design.

Plastisol as a polymer coating. Plastisol is the application of a protective polymer layer to the prepared upper side of the steel sheet.

But the paint has one significant drawback. It loses its properties and qualities over time. And after a few years, such roofs have to be repainted. And this entails additional costs.

In this regard, polymer-coated corrugated board is much better than painted. But even here there are some nuances - it is important which polymer was used. IN modern production and fences, four types of polymeric materials are used.

1. Polyester, a good and inexpensive coating, the standard thickness of which is determined by 25-35 microns. It perfectly protects roofing material in any regions with different climatic conditions. Can be glossy or matte with good color fastness.
2. Plastisol, which is based on polyvinyl chloride, and easier PVC; excellent material with excellent physical, technical and operational characteristics. This is one of the most stable coatings, which perfectly copes not only with natural harmful effects, but also with fairly large mechanical loads. The thickness of its layer is 200 microns.
3. Pural, which is based on polyurethane. Excellent protective layer (50 microns) that withstands large temperature differences. For pural +120 degrees Celsius is not the limit. It does not fade, there are no scratches on it, you can freely walk on it in any shoes, and no dents, scratches, notches and chips are formed.
4. PVDF is a mixture of two materials: 80% polyvinyl chloride and 20% acrylic. Brand new 27 micron coating. Even with such a small thickness, it will give odds to any other coating from the above. A professional sheet with such a coating can be used in regions with an aggressive environment. For example, on the coast of the sea or in cities with a high concentration of industrial facilities. Such material for roofing can be classified as eternal.

Conclusion

As you can see, in order to correctly approach the choice of corrugated board, which will be used for roofing and fencing, several indicators must be taken into account. Even a professional, and even more so an ordinary homeowner, will not be able to do this purely visually. But there is a special documentation, which has already been mentioned - a certificate of quality. It is in it that you can find detailed information about the manufactured product.

From the quality certificate, you can find out the raw materials from which the corrugated board is made, and the dimensions, and weight, and additional materials used, and test indicators.

Of course, it is quite difficult to understand all this, especially for an unprepared person. But do not forget that quality is always confirmed by the price. The professional flooring for a roof and fences is not an exception.

If you understand the most important characteristics corrugated board, you can always choose a material with the best value for money - one that will not hit your pocket hard, but will have all the necessary indicators. And then the roof of your house will be reliable and durable. If you choose one for your roof, then consider that you did everything right.

Which profile to choose

To make the galvanized steel roofing sheet more rigid, the manufacturers decided to profile it. So appeared new material, which has taken its niche in the construction industry. What is this material? Where is it used, what are its advantages, and what is the cost of a profiled sheet? More about all this.

First of all, you need to know that this material has several names - professional sheet, corrugated board, corrugated sheet. In our country, it began to be produced in the 70s of the last century. The scope of its application is the roofs and walls of hangars, workshops, pavilions, country houses and cottages, as well as fences. At present, the service life of a galvanized sheet has increased significantly due to polymer coatings.

Advantages and disadvantages of a profiled sheet

Since the profiled sheet is a facing building material, due to its specificity, it has a number of positive qualities:

1. The profiled sheet coating is not subject to corrosion, and it is not afraid of adverse atmospheric influences.
2. The sheet is durable and has increased mechanical strength.
3. He has a low weight.
4. The material is aesthetic, represented by a variety of shapes, colors and sizes.
5. It has good performance characteristics.
6. Differs in simple and fast installation.
7. It is possible to manufacture sheet with certain polymer coatings.
8. The cost of profiled sheet is low.

There are also disadvantages, but they are minor. There are only two of them. The galvanized profiled sheet has the so-called "drum effect", that is, the ability to amplify the sound.

But developers have learned to deal with it, using it on roofs as a heat-insulating material. mineral wool. It to some extent muffles the blows of rain or hail on the roof.

Another disadvantage is that if the protective layer is damaged, there is a risk of corrosion. But this is also solved by applying special means- polymer coloring compositions, which should be purchased simultaneously with the purchase of a profiled sheet. This makes it easier to match the paint color to the base material.

Types of profiled sheet

The classification of the profiled sheet is based on the source material. The manufacturer, producing it, is obliged to mark the products depending on the width and height of the wave.

By appointment, the sheet may be marked with the following:

• C - this view is designed for fences and walls. It has a small wave height, and if you lay it on the roof, there will be a risk of leaks. After all, the low height of the corrugations will allow water to flow during the rain, especially if it rains with the wind.
• H is a roofing material. Adequate wave height, capillary groove for moisture wicking and increased load-bearing capacity make this sheet ideal for such applications. In addition, its usable area is smaller than that of a wall sheet, which is important in regions with large snow loads. In addition to the listed purposes of the material, it is quite often used as fixed formwork at the device of monolithic overlappings. In this case, the corrugations perform the function of additional reinforcement of the structure.
• HC - a universal sheet designed for wall fencing, roofing, fences and partitions.

Roofing galvanized corrugated board

Depending on the type of profiled sheet coating, construction industry enterprises produce corrugated board:

• Galvanized. The cost of this type of material is low, but it is short-lived due to the rapid appearance of corrosive processes. And because of the low price, it is used for temporary fences and structures.
• Coated with aluminium-zinc. The base is not finished with a polymer composition. The price of the material is low, it has beautiful view and stronger than galvanized sheet.
• Coated with polyester. The most demanded type of profiled sheet. Thanks to the wide range of colors, developers create a specific design style for their site.
• Coated with pural or plastisol. This is the most expensive type of product, because the added components and the polymerization process of the metal sheet are much more expensive than conventional galvanizing.

The polymer coating has a wide color scheme, and the buyer can always choose one or another color of the material, and if it is not available, order the desired tone.

Types of sheet by type of protective layer

Polymer coated corrugated board

On the basis of the presence of a protective layer, there is a profiled sheet with and without a polymer coating.

Such sheets in their appearance resemble a layer cake with the following filling:

• steel sheet;
• galvanized protective layer;
• passivating layer;
• primer;
• polymer coating.

Polymers used as coatings:

• acrylic;
• polyester;
• polyurethane;
• polyvinyl chloride;
• polyvinylidene fluoride;
• plastisol;
• pural.

Such profiled sheets are used as partitions, walls, fences and roofing material with different angles of roof slope. It is rare that a construction site is complete without a galvanized sheet. Its use for low-rise buildings, kiosks, shops and gas stations has made corrugated board an indispensable material.

If the surface of the sheet does not have a polymer coating, then its price is quite small, and it is used for temporary structures, which are subsequently quickly dismantled. For example, for fencing an object under construction.

Different types of corrugated board in shape and size

Wall decking

Decking is a metal sheet that has been galvanized. It is produced by cold rolling on mills, after which the output is a corrugated sheet. According to its design, the corrugation can have different shape and height. Manufacturers offer material with the following types of profile:

• trapezoidal;
• sinusoidal;
• rounded or wavy.

The sheet profile obtained during cold rolling gives the material the necessary structural rigidity, which is very economical with a small sheet thickness. Its main advantage is resistance to static and dynamic loads.

The future profile is formed by a special press in the form of rollers desired shape. A smooth sheet, which is supplied from metallurgical plants in rolls, passing through a rolling mill, receives recesses of the desired shape. Next on production line a guillotine is installed, which cuts right size. Therefore, you can always purchase the required sheet length without building up several elements on the roof. And this is very valuable, especially for the roofing profiled sheet.

It is also possible to produce curved or arched profiles. This allows you to create curved products for cornices or roof ridges. A wide selection makes it possible to find exactly the profile that is needed in a particular case..

Conclusion

Now you know what corrugated board is, and what kind of profiled sheet is better to use for certain structures. So, if you are interested in the speedy construction of a structure or building, you can decide on the choice of this building material. Moreover, the price of a profiled sheet is low, and you can freely buy it at any store or directly from the manufacturer.

When erecting fences, the question arises of choosing the material for the fence. The range of proposals is so great that an inexperienced builder's eyes involuntarily run wide. What to choose: wood or brick? Which fence will look better, and which one will be more economical?

If you don't want to waste time looking for answers, choose one-stop solution- a fence made of corrugated board. Such material will make the appearance of the fence neat and save personal funds.

In this article we will try to give complete information about the fence from corrugated board and help you choose it for you.

What is corrugated board

Profiled sheet or corrugated board is a metal sheet created from galvanized steel. The profile repeats the shape of the wave, giving the material additional rigidity. The profiled sheet is perfect for facing houses and fences.

In Russia, a metal profile for a fence has gained wide popularity in the form of a building envelope. The owners of the plots quickly appreciated the durability, strength and cheapness of the material.

Advantages and disadvantages

The main advantages of a metal profile fence include:

• Strength. Thanks to the cold rolling technology, the material has a high rigidity. Massive snowdrifts are not a problem for a profiled sheet.
• Price. The low price per sheet allows you to cover large areas with a fence.
• Reliability. Service life of a professional flooring can reach 60 years.
• Big choice. You can choose any color of corrugated board and texture for the future metal profile fence.
• Protective covering. A special layer is applied to the profile, which preserves the metal from corrosion. Such a fence will not be afraid of snow or rain.
• Timing. Installation of a fence from a professional flooring does not spend much effort. Large areas of the site will be covered in a matter of hours. When using welding, the process will be even faster, but in this case you will have to observe some nuances.

The disadvantages include the simple appearance of the structure. Some types of metal profiles look like something rough and empty. In practice, this problem can be easily solved by selecting the external finish of profiled sheets.

Do not forget that corrugated board is a durable material. So much so that it is not recommended to plant trees or shrubs next to the wall. In the future, they can damage the integrity of the structure with their roots.

Profiled steel does not fit well with high welding temperatures. If you decide to solder, after all the work you need to lubricate the seams with an anti-corrosion coating. Otherwise, the fence will become unusable in a short time.

Types of metal profile

Exist different kinds fence decking. The main parameter for the difference between fences is the height of the wave. The profiled sheet for the fence is marked "C" and the number corresponding to this height. The higher the number of the brand of corrugated board, the greater the thickness and stability of the fence.
Consider each type of fence made of corrugated board separately.

Profiled C8

The wave size of only 8 mm makes this corrugated board the lightest and cheapest of the presented brands. With such a sheet, you can save a lot when building large-scale structures. However, the small thickness of the steel sheet makes it unsuitable for erecting long spans or high fences. Most often, this type of corrugated fence is used for the exterior decoration of buildings.

Profiled C10

One of the most cost-effective options when building a wall. It surpasses C8 in its strength characteristics, but at the same time it costs a little more. Such a fence can withstand strong gusts of wind or high snowdrifts.

Profiled C14

Popular fence brand. The rigid steel sheet will provide protection from deformation, and the wave shape is perfect for fencing the site. Good combination price and quality, and appearance. This type of metal profile fence is ideally combined with a brick foundation.

Profiled C15

Such a fence differs from all other forms by a wide edge. In appearance, this will make it more “smooth”, without unnecessary irregularities. The cost of such iron will be slightly more, while the technology for installing sheets does not differ from thinner brands.

Profiled C18, C20 and C21

The highest stiffeners allow you to achieve maximum strength of the fence. A wide steel profile does not limit the owner of such a fence either in height or in the length of the span. It is worth noting that the structures of profiled sheets of this type look unusual for the layman. The foundation will be able to brighten up the external roughness of such a fence.

What professional sheet is needed for the fence

To understand which corrugated board is better to choose for the fence, let's delve into the properties of the steel sheet.

For the correct selection, it is necessary to take into account all aspects of the future project: the height of the fence from the corrugated board, the width of the spans between the piles, the perimeter of the fenced area. Only knowing all these parameters can one accurately determine desired view profiled sheet.

How to choose the thickness

The wave height is the main parameter of the profiled sheet thickness. The price of the structure, its strength depends on it.

There are three options for selecting the thickness according to the grades of the fence:

• For fences up to 2 meters high, as well as in areas without strong gusts of wind, types C8 - C10 are suitable. They are economical and will not require a lot of expenses even in large areas.
• If you need a high fence with a wide span, grades C 14-18 are better suited. Such a wall will reliably protect against wind effects or other physical influences.
• The corrugated board for the fence of the C20 or C21 brand will help in cases where it is required to ensure maximum strength of the fence.

In addition to high ribs, a strong sheet should have a thickness of 0.45 mm or more. It is this minimum that will not allow easy deformation of steel.

How to check the thickness

As mentioned above, thickness is one of the most important factors when choosing metal profile for a fence. However, it can be problematic to check it with an accuracy of hundredths of a millimeter.

Even a special tool, a micrometer, does not guarantee the thickness of the steel in all parts of the future fence.

In this case, it remains to rely only on the honesty of the fence manufacturers from the profiled sheet.

How to perform material calculation

It should be noted that the thickness of the metal profile remains not the only parameter for calculating the number of sheets.

The width of the profiled sheet also affects the overall construction costs. The standard width of a rolling fox is 125 centimeters. At the same time, during the formation of waves, it can proportionally decrease. Therefore, the higher the sheet waves and the stiffer the structure, the more sheets will be spent on the same span.

The choice of grades C18 - C21 can increase the cost of the wall several times.

Which color to choose

To date, the profiled sheet can be painted in any color corresponding to the German RAL color standard. This opens up huge opportunities for the external design of the protected area.

Such varnishes are ideal for external weather conditions, do not destroy the metal and retain their shade for a long time.

Which protective coating is best

For a long service life of a fence made of corrugated board, it should be treated with a special protective coating. It will protect the steel from corrosion and improve decorative look fences.

It is worth considering the price, quality, protective properties of the applied layer. The combination of an expensive metal profile with a cheap protective layer is tantamount to applying an elite varnish to an inconspicuous fence.

Let's analyze the advantages and disadvantages of each coating for corrugated board.

Zinc coating

Simple galvanized steel provides little protection for the structure, but is inexpensive. The coating is not pleasing to the eye due to the metallic reflection effect. However, such a profiled sheet is more suitable than others for building fences over an area of ​​more than a hectare.

If decor is not important during construction, then use zinc as the material of the outer layer. Such fences are often found around industrial zones, storage facilities, temporary structures.

Aluzinc coating

The coating consists of 45% zinc and 55% aluminium. Such a composition preserves the sheet from external influences, while it looks a little better than galvanized. Aluzinc coating is used for large-scale fencing, usually around industrial buildings.

Unlike zinc, aluzinc can be painted with special paints for metal based on acrylic or oil. In this case, their use will increase the cost of the fence.

Polyester cover

For fences in cottages or private areas, a polyester coating is suitable. The difference between the polymer layer is that it easily tolerates physical influences and looks pleasant, like a gloss. Due to the smooth surface structure, dirt or dust is easily washed off from it.

Polyester is an inexpensive material. By paying an average price, the owner of the house will receive a fence that is durable, presentable and easy to use.

Plastisol or pural coating

Plastisol and pural 100 percent protect the material in bad weather or physical contact. The rough surface structure does not retain dirt, dust and water. The structure will look like new for decades.

Plastisol and pural are more expensive than other coatings presented. At the same time, experts note that the final profitability of such sheets is higher than that of cheap options. Such a fence is most often used in luxury real estate construction projects.

Without decorative coating

If you plan to fence a wide area of ​​\u200b\u200bthe site or industrial enterprise using decorative metal will not be economical. This applies to situations where the wall is erected temporarily.

Zinc and aluzinc coating will fit into a possible landscape, and most importantly, will not hit your pocket.

With decorative coating

Manufacturers of profiled sheets offer a range of colors and designs. In many building projects, profiled sheets are successfully used, up to interior decoration premises.

More and more often there are fences painted under a tree, brickwork, or stone backfill. This striking resemblance is due to modern methods high-tech metal painting. From afar, such structures are indistinguishable from natural materials.
To give the fence additional aesthetics, decorative strips, brick columns, and forged accessories are used.

Conclusion

To date, corrugated board has become a significant material for owners throughout Russia. It is used everywhere, it is unpretentious to our climate and easily acquires a neat appearance.

Often the metal profile is underestimated because of its simplicity and affordable price. Now we have found out that even a profiled sheet can be elite, even expensive, it also needs to be looked after. A profiled sheet wall is an excellent choice for a beginner who is just starting his journey as a successful site owner.

Man by nature is overwhelmed with emotions, this is our reward and punishment. Emotions of joy, negative emotions, they are all part of our lives, but when we make purchases under a rush of emotions, we very often then regret it.

Modern life is too fast and emotional, and we are subjected to its constant acceleration, and whether we like it or not, we have to make decisions about the choice of goods (in our case, metal profiles) just as quickly.

In order to save your time and not put you in front of a choice - “buy now, it will be more expensive tomorrow”, we bring to your attention the correct algorithm for choosing a metal profile.

So, 7 tips on how to choose the right metal profile (profiling).

Council number 1. Why do you need corrugated board or choosing a profile model

At the very first stage of choosing a metal profile for your needs, you need to overpower yourself and forget about the price of corrugated board. Do not call various companies selling these products in search of the best "best price". With this approach of choosing corrugated board from the price, you can buy a profile that you simply do not need.

Each model of corrugated board is individual and was developed not just like that, but in order to perform certain functions. If you are building a fence from corrugated board, then it makes no sense to use the carrier profile PN44 for its installation, there is no point in this, neither from an economic, nor from an aesthetic point of view.

Decide on the purpose of your purchase - is it a fence, roof, facade or something else and select a specific model of corrugated board for this purpose. Having chosen the model of the metal profile you like, you can start looking for the material from which this profile will be made. And this is the next point of choice and for him the second advice.

Most of the clients simply relate to the choice of the type of coating for the future corrugated board - “I want a green fence” or “I like a red roof”. Of course, the preference for a certain color is important, because it is your personal choice, and yet the coating of a metal profile is not just a certain color, but also the properties of the profile, its durability on your roof or fence.

It is important to remember that the coating comes in different thicknesses, application technologies and other features. Try at least in general terms, we think a qualified sales manager will help you with this.

Two coatings are leading in our metal profile sales market - glossy and matte.

The matte finish in theory is superior to the glossy one (due to the thickness of the coating), but in our age of constantly cheaper materials, everything has turned upside down a bit, try to ask more right questions to managers selling corrugated board, then you can see the big picture, and we move on to the next important issue- thickness.

Probably not from a good life, the thickness of the corrugated board is getting smaller (thinner) and smaller. About ten years ago, there was simply no metal profile with a thickness of 0.3 - 0.35 mm, but now most sales managers will tell you: “take a profile in this thickness - why pay more.” And the most unfortunate thing is that some of the “sellers” give out a thickness of 0.3mm for 0.4mm or 0.4mm for 0.45mm, and all because the real thickness is difficult to check.

It is important to remember a simple truth - profile thickness is the only indicator on which the price of a metal profile per m 2 depends . From thinner metal, more meters of finished corrugated board are obtained, because the roll is purchased in tons, and sold in meters.

Today's recommendations for choosing the thickness of the metal profile are as follows: roof- thickness 0.5mm - 0.45mm, fence- 0.45mm - 0.4mm. Anything smaller in thickness should be used indoors, not outdoors. Thinner metal can be applied to both the fence and the roof, but you must understand that its service life will be short.

There is another indicator of importance similar to the thickness of the metal - this is the zinc content, but it is still more difficult with it.

Council number 4. Remember the "secret" parameter - zinc content

Unfortunately, we have to admit that when choosing a metal profile, you will have to take the word of the seller about such a characteristic as the zinc content in the material (roll) from which the corrugated board is made.

Of course, any seller to your question - how much zinc per m 2, will voice these mysterious figures in 275g / m 2, 225g / m 2, 140g / m 2, 100g / m 2. But how can these numbers be verified? There is only one answer - only by handing over a sample of the material for a special laboratory analysis. It is clear that this method is not available to customers. How to be?

Use common sense and simple logic.

Everything is quite simple - any product is aimed at its end consumer, or rather, the manufacturer produces goods for different price niches. There are customers who want the best and, accordingly, the most expensive, there are people who want to buy the cheapest, and there are customers who want to choose the golden mean in terms of price-quality ratio and they are the vast majority.

Such a simple logic is clearly seen in the production of raw materials for metal profiles. If the plant produces material that is needed for the production of roofing, then it will be 0.5 mm thick and zinc content 275-225g/m 2 . A cheaper version of such raw materials can be produced in a thickness of 0.45 mm and a zinc content of 180-140 g / m 2. The plant also produces cheaper raw materials with a thickness of 0.4-0.35 mm and a zinc content of 120-80 g/m 2 .

You must understand that the plant produces different raw materials, and it is not responsible for the fact that it is not used for its intended purpose.

If someone wanted to roll a metal tile with a metal thickness of 0.4 mm and a zinc content of 100 g / m 2, then he probably understands that such a metal tile will not last long.

If the price of a metal profile is very low compared to other offers, then you can be given any numbers about the zinc content, but, unfortunately, there are no miracles. High-quality material is expensive and cannot be cheap, no matter what promotions and sales are held. Compare offers from different sellers and analyze, by the way, our next paragraph on price offers.

As we said in tip #1, don't chase the lowest price. First select the type of profile you need, decide what it should have technical specifications and according to these indicators, look for a company that has the best price offer.

Any product on the market, including a metal profile, lives its own life, understandable only to him, while acquiring myths and legends. The behavior of buyers is always natural, they themselves invent a myth for themselves and believe in it themselves, and sales managers use this.

Here the professional flooring - "Slovak" fell in love with customers, so they are looking for it together. But at the same time, for some reason, they stubbornly refuse to notice that in some firms such a Slovak with a thickness of 0.45 mm costs 140 UAH. per m 2, and on others in the same thickness "Slovak" costs 100 UAH. per m 2. This is despite the fact that the competition in the market is tough and everyone follows each other's prices and the difference in price is usually only a couple of hryvnias, and then there is such a price difference, well, what's the matter, probably, ONCE-SALE-SALE!

Be realistic, do not invent myths for yourself - what if ONE-SALE-SALE! The prices are now approximately the same for everyone, and if somewhere something of very high quality costs very little, then something is wrong with it.

Our proverb - “Bachili ochі, sho bathed, zhte, hoch povilazte”, perfectly conveys the meaning of the virtual purchase of a metal profile through the site. Such a product as a metal profile should not be purchased without visiting the office of a company selling such a product.

No matter how much you look at the monitor, choosing the color and profile model, it will still be preferable to visit the office. In the office, in a calm atmosphere, you can see and touch everything, make calculations and place an order.

There are, of course, other options for buying, for example, large building supermarkets are now in vogue, it is also possible to see and feel everything in them and also buy right away, but still there are two big minuses in this.

Firstly, you are forced to buy only what is available, and these are just a few standard sizes sheets of corrugated board in several colors. And, as you know, the beauty of ordering a metal profile is precisely in the fact that it is individually produced for you, according to your size from your chosen color.

Secondly, in large hardware stores you will never be qualified to advise, but on the contrary, you will still have to run around the departments for consultants to ask at least something.

No doubt where to buy construction material only you decide, our task is to bring to you how to do it better.

Council number 7. We get a metal profile, the life of the goods after purchase

Separately, I would like to say about the receipt of the profile and its transportation to the installation site. Profiled sheeting and metal tiles leave the rolling machine in perfect condition, all possible troubles regarding the deformation of the profile and the occurrence of small scratches mainly occur during the transportation of the profile or when it is unloaded.

Realistically evaluate your technical capabilities for the delivery of metal profiles, you need to have some experience and technical means to do everything correctly and not damage the cargo during transportation.

Also, close attention should be paid to unloading the metal profile, try to control this process personally. It is unpleasant to see when sheets of corrugated board or metal tiles are unloaded like firewood, this is usually done by people who do not care what happens next with this profile.

And finally, about the life of your metal profile after purchase.

This last paragraph combines all the previously listed tips, more precisely, what choice you made, then you will get as a result.

It is naive to assume that by choosing a metal profile from the most inexpensive raw materials, you will admire your fence or roof until the end of your days, there is no lifetime guarantee for such a product.

So, how long will the metal profile you bought last, according to by and large depends on your thoughtful choice. And we wish you only successful acquisitions.

We offer corrugated board for the fence in any design and everything you need - poles and veins, caps, fasteners. Current prices for profiled sheet for fences.

Profiles for fences from corrugated board

Prices for corrugated board for the fence

Profile	Thickness steel, mm	Coating type
		Zinc	Polyester	double sided	Printech	Ecosteel	Ecosteel mat
Profiled C-8	0,4	207 rub	245 rub
	0,5	261 rub	345 rub	310 rub	-	490 rub	520 rub
Profiled C-20	0,4	215 rub	255 rub
	0,5	271 rub	360 rub	325 rub	-	510 rub	540 rub
Profiled C-21	0,4	233 rub	278 rub	-
	0,5	295 rub	393 rub	-	-	560 rub	591 rub

Download price list:

The price of elements for a fence from a profiled sheet

Fences from a professional flooring are that scope where the pro-thinned-out sheet shows the best qualities.

At construction sites, around industrial facilities and garden plots, you can find similar fences.

The material for manufacturing is very diverse - galvanized corrugated board or with a polymer protective coating, of different colors and sizes.

Colors can be very different, and they can be matched to the color of the roof or facade.

There is also a double-sided profiled sheet - it has the same color on both sides.

Fence profile options

Galvanized corrugated board

Double-sided corrugated board

Always in stock!

In the warehouse, we try to keep in stock a ready-made profiled sheet of the C20 brand, two meters long, in three primary colors - red, green, brown. Material of other lengths, profiles or colors can be made to order within 3-5 working days if the metal is in stock.

Red

Green

Brown

Decking for stone, brick and wood

Modern polymer coating accurately mimics the structure of natural materials.

Some color options:

light wood

dark wood

bog oak

Maple

Cedar

Ecosteel colors

golden oak

Cedar

Bog oak

Pine

Maple

bleached oak

Larch

Siberian cedar

Colors Color Print

golden oak

antique oak

Cherry

bleached oak

Nut

Rowan

White stone

sandstone stone

Brick

Fence tree profiled sheet

Ordinary profiled sheet has a light gray or beige surface on the reverse side. It's a thin layer of polyester. However, double-sided corrugated board is produced especially for fences - both sides of it are covered with material of the same color. It can be polyester or wood grain.

Ecosteel colors Double sided

Golden oak (textured)

Bog oak (matte)

Colors Colority Print Double

golden oak

antique oak

Golden oak with curly edging. Figured profiled sheet is also available in Colority Print, 3005, 6005, 8017

What you need with the sheets

In order to build a fence, you need several elements - poles, veins, covering profiles, fasteners. We have all this in stock.

Pillars and veins

Fence from a professional flooring under a brick

Profile sheet advantages:

Quick installation

The main task during installation is to dig in the pillars and fix the guides. The large area of ​​the sheets allows you to mount them in a short time. Installing a corrugated fence is not particularly difficult and can be easily done on their own– even without experience of similar work.

Light weight

Construction is also simplified due to the low weight of the material. The mass of 1 m² of metal is not more than 5 kg. Sheets are easy to deliver to the site and unload. Installation of corrugated board for the fence does not require special equipment or additional human resources.

Material strength

For all its subtlety and lightness, corrugated board is a durable and plastic material. This is achieved by metal profiling. The profile sheet acquires stiffeners, which greatly increase its strength characteristics. Rest assured, fences for summer cottages from profiled sheets will become reliable protection and a guarantee of safety.

Durability

Galvanized metal, in itself, is quite resistant to various natural influences. If a polymer coating is used to protect it, then the material becomes very durable. Having installed a fence made of corrugated board, you can forget about its maintenance for a long time - painting and repair. When dirty, it can be washed with water from a hose.

home » hip » What is the profile for the roof? What is the best decking for a roof? What to do with sheets after purchase