Do-it-yourself phone stand. Mobile phone stand - how to do it yourself DIY wooden phone stand

Mobile communication devices are in every home, they have become almost indispensable for modern man and perform many functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the most the best options this is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

Most easy way how to make a do-it-yourself phone stand out of wood - it's just to make it from an ordinary plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a basis, such homemade stand for the phone can have any wood and can be given any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will ruin appearance your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small planks.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be problematic to find the right angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a phone stand of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful view. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your stand to mobile phone handmade was beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and you don’t need a special tool for this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 and even large quantity binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

AT household we use a variety of cleaning and detergents. Most of them are contained in plastic container. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of ​​the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. Optionally, this holder can be painted, pasted over beautiful paper or cloth.

paper clips

The simplest and affordable option coasters are an ordinary metal clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such useful thing like a phone stand.

Have you purchased a modern gadget and now want to make a stand? There are many techniques and methods that you can use to make a phone stand. Stylish little things can not only decorate the interior, but also make using the phone comfortable. In this article, we'll show you how to do it.

It will not be difficult for a home craftsman who has a minimum of tools and a maximum of diligence to make just such a wooden phone stand. As a material, a board 10 mm thick, plywood, is suitable. You can also use thinner plastic. Approximate dimensions are shown in the figure. The stand is 10 centimeters high, 8 cm wide (6 cm clean). Installed on two semicircles with a radius of 4 centimeters. Of course, before you get down to business, measure the widest of the phones that will stand in it. A stand is assembled for PVC glue, then decorated at your discretion. For example, in the figure above, the edging is processed by burning.

Well, here I think it’s hardly necessary to explain anything, especially to us - people who are not young. Yes, of course, many have learned, the good old "cassette" from a tape cassette.

Just remove the cassette, turn the cassette holder over, open it to the other side and you get a stand at an angle of about 75 degrees. The width of the "pocket" is about 12 millimeters, the current thin smartphone fits perfectly there.

Here is such a "brutal" stand for the phone from an ordinary aluminum plug. The two extreme teeth are bent at the very base at an angle of 90 degrees. The two middle tendrils are bent at a distance of 15 millimeters from the base, also at an angle of 90 degrees. Your gadget is inserted between them. The fork handle plays the role of a support.

This coaster requires six clothespins and one pencil. The pencil is preferably hexagonal, on a round clothespins will slide. I think it’s clear from the photo - four clothespins are legs, two on the top actually hold the gadget, a phone is inserted between their petals. The width adjustment is very large - the length of the pencil. By the way, even if you hook a couple of clothespins on the edge of any vertical surface (let's say the wall of the box), they will successfully cope without four other clothespins and a pencil!

This stand is very simple, but also suitable for small phones. This is an ordinary old bank or discount plastic card. It should be divided across into three equal parts with a pencil and bent along the lines. But I would make the lower "heel" on which the phone will stand only a centimeter, and divide the remaining distance into the "shoulder" of the prop and support itself.

In the world modern technologies It is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

• paper;
• tree;
• plastic;
• gypsum;
• any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

• colorful paper or white, which will then be decorated;
• multi-colored gouache, watercolor or acrylic paint;
• glue;
• ruler for measurements;
• simple pencil;
• scissors;
• various decorative ornaments that will be appropriate are also worth keeping on hand.

Correctly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.

Sequencing:

• First you need to figure out what shape the stand will be.
• After that, you need to draw templates of the desired sizes on the sheet.
• Elements for the product are cut out on them.
• Then, carefully, according to the scheme that was previously drawn or printed from some site, we glue the necessary details.
• After that, you should wait until all the elements are fixed.
• The next step is to connect the individual parts to each other.
• Let all fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used.
• After decorating, it can be considered a finished phone stand. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

• special equipment;
• skills;
• ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

• the tree from which the structure will be built;
• tools for working with wood;
• product diagram;
• felt-tip pen with which you can draw on wood;
• ruler;
• glue;
• accessories (buttons, beads, rivets);
• simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

• First you need to find a suitable scheme for the product.
• Then it is required to put marks on a wooden base, according to which the connector will be cut out in the future.
• The next step is to cut out the shape with the existing tool.
• Then you need to take control measurements and find out if the mobile phone fits in the cut out socket.
• After that, you need to glue the prepared parts.
• The next step is to smoothen the product. This can be done with a file or a special device powered by the mains.
• When the surface is smooth, you can decorate the finished shape with some color.
• After staining, you must wait for the product to dry.
• The work is completed by gluing the accessories chosen for this mission.
• At the end, a completely finished structure should be opened with varnish, which will add shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

• shells;
• buttons;
• rhinestones;
• beads;
• foil;
• colored tape.

In general, everything that is at hand and has unusual view, can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

home » Interesting Facts » Do-it-yourself phone stand. Mobile phone stand - how to do it yourself DIY wooden phone stand