How to wash an acrylic bath at home? Tips for washing with improvised and special means. How to wash an acrylic bath - tips and tricks Whiteness and acrylic

To properly care for an acrylic bath, you need to purchase soft sponges and microfiber cloths. Also, when cleaning, it is necessary to use special products that will not harm the acrylic surface, which quite specifically perceives the effects of aggressive chemicals. Find out more about cleaning such a bathtub below.

Purchased cleaning products

• Acrylan. Foam is recommended as a detergent. With its help, you can remove various contaminants in the form of rust and limescale. The contaminated surface is wiped with a sponge, on which foam is applied, and after 10 minutes from the moment of treatment, it is washed off with water.

  The foam creates a thin protective layer that prevents dirt from settling on the surface of the tub.

• Sif, Vass. are considered the most universal means for gentle cleaning of sanitary ware surfaces, including acrylic bathtubs. They do not contain substances that can damage its surface. After cleaning with these products, the bath will shine with brilliance and whiteness, if there are no old dirt.
• Cinderella. It is recommended to wear rubber gloves and a mask when using the product, as it releases bad smell. It should be kept on the surface for about 7-10 minutes. Then rinse with a shower and wipe with a sponge or microfiber cloth.
• Chister. Its advantage is that it contains an acrylic polymer. When processing the surface, it covers it like a film, repelling different types dirt, and the bath will shine with brilliance and whiteness for a long time. It will not accumulate bacteria and fungi. A surface treatment of 5 minutes is sufficient.
• Team Pro. A special product for acrylic baths, which not only gently cleans various types of dirt, but also eliminates odors, and also creates a reliable protective layer against other dirt.
• Bon Professional. It is a reliable cleaner for plastic products. It is applied to a cloth and wiped the surface of the bath. It is recommended to wait a few minutes and rinse thoroughly clean water. It forms a special film that protects the surface from contamination for a long time.

In addition, if there is no special product at home, you can use dishwashing gels, as well as washing powder, previously dissolved in water.

Can Domestos be used?

But before proceeding with the treatment of the bath with this remedy, you need to know how this is done:

• First, moisten a soft sponge with the composition and wipe the bath.
• Wait about 1 minute and wash off the composition large quantity water.
• Wipe the surface dry.

In addition to cleaning the surface, Domestos reliably disinfects it and creates a protective layer.

Homemade Acrylic Bathtub Cleaners

• Lemon acid. To clean the bath, fill warm water to which 10 g of acid is added. Water is not drained for about 2-12 hours. After the time has elapsed, the water is drained and the surface is rinsed. running water. Residual moisture is removed with a soft cloth.
• Toothpaste. When different kind stains use toothpaste. It is applied to a sponge and the stain is rubbed, slightly pressing on it.
• Baking soda. If it is necessary to remove rust or limescale, use a slurry of baking soda. The surface is treated with it and after a while it is washed off with warm water.

Ways to remove yellowness from an acrylic bath

• For gentle bleaching of acrylic baths, it is recommended to mix in equal proportions ammonia and hydrogen peroxide. With this composition, it is necessary to wipe the baths using a delicate cloth.
• Use in equal amounts lemon juice and vinegar. They are mixed and applied to the surface with a sponge.
• Apply laundry bleach. To do this, the powder is diluted with water to make a slurry, and applied to the spots. Leave until the slurry dries, then rinse with clean water and wipe with a rag.
• Finish the surface of the bath apple cider vinegar then rinse with water.

Removing limescale from an acrylic bath

So that the plaque does not have time to stagnate, it is necessary to clean the bath with these products at least 2 times a month. If measures are not taken in time, then over time a thin hard film will thicken. Each time it will be more and more difficult to remove it from the surface of the acrylic bath.

We remove strong plaque and "water stone"

• Take cleaning powder for dishes or laundry, dilute with water and mix until a slurry.
• Add 2 tbsp. l. whiteness and 1 tbsp. l. vinegar.

Video: How to wash an acrylic bath?

Whiteness is a common remedy that housewives successfully use for washing and cleaning. various surfaces. But, it is a rather aggressive liquid, therefore, it is not suitable for processing all materials. Can it be washed acrylic bath Whiteness, as well as enamel steel and cast iron sanitary ware?

What is Whiteness for and how does it work?

Whiteness is a liquid bleaching and disinfecting agent with high efficiency. Its action is due to the presence in the composition of sodium hypochlorite, or simply, chlorine - an active, strong oxidizing agent, at a concentration of 95.2%.

Whiteness is used:

• for bleaching textile fabrics made of cotton and linen - it eliminates grayness, stains, makes linen snow-white;
• for disinfectant treatment enameled, porcelain, faience products, tiled, plastic surfaces, metal parts of plumbing.

For some materials it is used undiluted, for others it is used only as a solution.

Cleaning a cast iron bath

For cast iron bath this liquid is suitable, it can be used to restore the original shade of the enameled surface. Whiteness removes fatty deposits, stains left after dyes, in addition, the chlorine component kills most pathogenic bacteria.

However, if you want to remove rust or lime deposits, then a chlorine-based product will not provide a good result.

You can wash the bathtub with whiteness, tile, joints, plastic panels. It will save the treated areas from mold, fungus.

An enameled bowl is best cleaned with a hard sponge that does not have metal fibers. The product is recommended to be diluted in water, in a ratio of 1: 2.

Acrylic bowl processing

Acrylic is a thermoplastic polymer that is resistant to most aggressive substances, including chlorine. If you clean the acrylic bathtub with Whiteness or other chlorine-containing preparations, you can damage the surface of the bowl:

• after the first application, the top layer of the bath will become cloudy;
• then - sodium hypochlorite will begin to corrode the polymer, breaking its structure, making it porous;
• rust, stone deposits form in the pores.

A damaged product will require laborious restoration, and in some cases, the only option is to replace the bowl.

Enamel Care Steel Bowl

A steel bath, like a cast iron one, is covered with a layer of enamel, only it is thinner. You can wash it with Whiteness, but without using hard brushes or sponges.

It is desirable to dilute the liquid in water - 1:2 or 1:3.

Disinfection with whiteness

If Whiteness is not suitable for cleaning an acrylic bathtub, then it can be used for disinfecting treatment, which is carried out every 10-12 months. Moreover, the liquid is used for both conventional and hydromassage models.

The procedure is carried out as follows:

• the bowl is filled with water at room temperature;
• 2-2.5 liters of Whiteness are poured into it to get a 7% solution;
• if the bathroom is ordinary, then the agent is left for 10-15 minutes, in the case of a hydromassage device, the system should be turned on for the same period of time;
• then, the water must be drained, the bowl refilled and emptied again.

Whiteness is a caustic agent that requires compliance with a number of rules: contact of the liquid with the skin and mucous membranes should be avoided, protective gloves should be worn.

This liquid is an excellent assistant in household affairs - effective and budgetary, however, if it makes the enamel clean and snow-white, then it completely ruins the acrylic, this must be taken into account.

You can achieve a sparkling white bath if you know the tricks and use the right means to remove different types pollution. So, cast iron cannot be washed with bleach or rubbed with a hard sponge, and the usual “old-fashioned” methods with ammonia, salt, vinegar and lemon will help to easily get rid of rust.

It should be borne in mind that an unpleasant color is only half the trouble, in addition to being ugly. appearance, such contamination can be dangerous, as pathogenic bacteria multiply in the bath, leading to a number of health problems.

Causes and types of pollution

Causes of dirt and plaque:

• Soap residue - is formed when using shower gels, shampoos, conditioners, etc. Simple rinsing is not enough here, as it is quite resistant and can only be washed off with cleaning products and a brush.
• Limescale - occurs with increased water hardness.
• Rust - comes from the faucet and settles on the walls of the bath, causing yellowness.
• Colored spots - their appearance is most often associated with the inaccurate use of coloring substances, for example, hair dyes, brilliant green, potassium permanganate, etc.
• When repairing an apartment, you should take care of the safety of the bathtub by covering it with a film, because building dust settles on it and then it is difficult to wash it off.

Ways to clean different types of bathtubs

Depending on what kind of bath you have - acrylic, cast iron - the methods of washing it also differ. So, it is better not to clean the first one with ordinary powder, but to use dish detergent or liquid soap. To wash a cast-iron bath, you will need a fairly soft sponge, as a hard one will leave scratches on the surface. Headache any housewife is a yellow coating on the walls, which appears as a result of daily contact with water, but it can also be easily eliminated. About everything in order.

Acrylic

The surface of an acrylic bathtub will not withstand aggressive chemicals and if regular brushing they will quickly fall into disrepair. Therefore, it is worth refusing to use products that contain alcohol, ammonia and acids.

Washing such a bathtub with laundry detergent should be avoided, otherwise it will fade and turn yellow.

Dishwashing liquid, liquid soap applied to a sponge - this is what you can use for cleaning. If every 10 days you treat the bath with a special polish containing wax, it will delight you with a beautiful view for a long time.

Compared to an acrylic bath, it is more wear-resistant, but when cleaning it, you should not use chlorine-containing and acid-containing products.

The sponge should also be soft enough, a hard brush will scratch the surface. After aggressive cleaning, it can become even more yellow.

It is best to get rid of traces of rust as soon as they appear. To do this, apply a little hydrochloric acid to the problem area and wash it off after 10-15 minutes. In this case, it is better to wear gloves on your hands.

Old cast iron bath

The main problem of such baths is the formation of rust, limescale and coating with a layer of fat. But even in this case, there are many tools that will help restore purity:

• Whiteness - with its help you can return White color and remove bacteria, fungus, mold, grease and rust. It is used only in a diluted form: 1 part of whiteness and 2 parts of water. The resulting liquid is applied with a sponge to the surface of the bath and left for 20 minutes. Do not neglect gloves when using whiteness, as it irritates the skin. Another cleaning method: draw water into the bath and pour in about 100 ml of liquid, stir and leave overnight, drain in the morning.
• Mister Muscle penetrates deep into stains and destroys them, helping to get rid of grease, dirt, lime and bacteria. Compared to whiteness, this product is more gentle on the surface, but it also costs an order of magnitude more expensive. It is also recommended to wear gloves when using it.
• Gel Cif - effective for cleaning sinks, bathtubs. Easily copes with limescale and rust, restores shine to surfaces.
• Comet is available in powder and gel form. The latter cleans surfaces more gently than powder, which causes additional microcracks. The tool helps to eliminate not only all types of pollution, but also microbes.
• Gel Sanoks - the most effective among all of the above means. It is used when other methods fail. In addition to removing dirt, plaque and rust, it also eliminates unpleasant odors. You should not use it often, only in emergency cases, as it “eats” the surface of the bath.

ceramic

Cleaning ceramic baths has some features:

• should be regular, at least 2 times a month;
• you need to abandon hard brushes, powders and products containing abrasive particles, as they will lead to microscopic cracks in which dirt easily clogs, as well as a decrease in surface gloss;
• The glaze that is used to cover the ceramic bath is not afraid of acids, so you can safely use any liquid cleaning products and not be afraid to spoil the surface, but they should not be used more than once every 14 days.

Wooden

Wooden bathtubs are gaining popularity every day, because they are not inferior in quality to the rest, while they are environmentally friendly and have an unusual appearance. Caring for them is more difficult:

• it is imperative to wash the bath after each use in order to prevent the formation of stubborn stains that are difficult to remove;
• use products suitable for varnished surfaces;
• it is worth periodically rubbing with special polishing and protective compounds.

Stone

Modern stone baths are extremely expensive. They come in 2 types: natural and artificial stone. The surface of the second type has no pores, corrosion is not terrible, due to which you can not worry about the appearance of fungus and bacteria.

Care has its own characteristics:

• After each bath, rinse it with running water and wipe it dry with a soft cloth;
• Monthly general cleaning is required. Wet the bath with inside and spray with a non-abrasive detergent (e.g. Delamark Royal Powder). It is worth making sure that it does not dry out, but remains wet during the entire cleaning process. At the end of cleaning, rinse off the remnants of the product, wipe with a cloth, polish with liquid wax.

Kvarilovaya

This is the new kind polymer materials. Quaryl is a combination of quartz sand grains with acrylic capsules.

The main feature is resistance to mechanical damage - the material is not subject to scratches compared to acrylic. But the price of such baths is extremely high.

Operating rules:

• refuse extremely hot water;
• you can wash by any means, the material is not afraid of scratches and abrasives;
• due to the extremely smooth structure, it is enough to rinse the bathtub with water after each use;
• do not place heavy objects near the bath, if they fall into it, they can damage the surface.

Marble

A marble bath is an extremely expensive pleasure, and it requires appropriate care:

• chemical cleaning products are prohibited;
• soap solution is used to remove contaminants;
• light tones of marble are bleached with salt and lemon juice mixed to a paste-like consistency. The resulting mixture is applied in an even layer on the marble and left for 15-20 minutes, washed off with soapy water and water. If necessary, repeat the procedure;
• the washed and wiped bath is rubbed with polishing paste to add shine;
• in order to extend the service life, they are regularly sent for restoration, entrusting this matter to professionals.

Removal of the main types of pollution

These include: rust, limescale and mold.

You can get rid of rusty stains not only with household chemicals, but also with the tried and tested "old-fashioned" way:

• ammonia is applied for 2-4 minutes on the stain, and then washed off, you can repeat;
• salt, diluted in a ratio of 1: 1 with vinegar, wipe rusty surfaces;
• squeezed lemon juice is used similarly to ammonia.

To cope with limescale, you can use vinegar and soda:

• soda ash and baking soda, taken in equal proportions, are applied to the entire surface of the bath for 20-25 minutes, lightly rubbed and washed off;
• moisten rags or paper towels with vinegar and cover the entire surface requiring cleaning. The time depends on the degree of contamination, but usually 5-15 minutes is enough. After that, you can wash off the vinegar by rubbing the surface a little.

To kill mold, a mixture of activated charcoal tablets with whiteness is effective. The resulting gruel is applied to the places necessary for processing for 1 hour or more, then simply washed off with running water.

Baking soda sprinkled with vinegar will help get rid of the fungus.

Removal of other types of contaminants

In addition to the above, there are more rare types of pollution. But the fight against them also does not require much effort.

Potassium permanganate and greenery

Any, even very weakly concentrated solution of potassium permanganate leaves on the surface of the bath brown spots. You can destroy them with hydrogen peroxide, lemon juice or citric acid. A bonus after cleaning with these products will be not only whiteness, but also shine.

Brilliant greens are removed with alcohol, but this method is not suitable for acrylic baths - the stain will remain.

After renovation

When carrying out repairs in an apartment or house, it is worthwhile to close the bathtub in advance in order to protect construction debris and materials from getting on its surface.

If the bath is still dirty, then you should not be upset, you can wash it:

• If paints get on the surface, any solvent, for example, White Spirit, will help get rid of them. But do not delay the cleaning process, otherwise the paint will dry out and it will be more difficult to remove it.
• Construction dust can be washed off with soap and water. To give whiteness and shine after the bath is treated with lemon juice or acid.

sealant

Joints and seams are closed with sealant; if it gets on the surface of the bath, it will be quite difficult to wipe off. There are several ways:

• Mechanical removal with a clerical knife. When doing this, remember to take safety measures and wear gloves and goggles.
• Chemical - use agents that dissolve the sealant. For these purposes, a solvent, for example, White Spirit, is suitable.

Cleaning chrome surfaces

The bathroom faucet, shower hose and other chrome-plated products are also affected. various types pollution. To cope with rust and limescale will help:

• baking soda moistened with water;
• table vinegar.

From household chemicals, Cillit Bang Anti-plaque + shine does an excellent job with such pollution. You just need to spray it on all surfaces, and after 5-10 minutes wash it off with a sponge dipped in water.

Other folk remedies

The store has a huge selection of household chemicals that help in cleaning the bathroom. But many housewives trust folk proven methods more.

They can also remove stubborn stains and save money in doing so. family budget. There are a lot of such recipes, but among the main ones are the following:

• Soda ash and baking soda are mixed in equal proportions with a small amount of water until a homogeneous mushy mass is formed. The resulting mixture is applied to the areas of contamination, and poured on top of a pre-prepared solution of any liquid bleach with vinegar, taken in the same proportions. Leave for 20-30 minutes, remove with a sponge, rubbing a little especially stubborn stains. It must be remembered that this is an extremely aggressive cleaning method and can only be used on a cast-iron surface. If the bath is made of acrylic, it is better to use a more gentle agent - wipe the places of contamination with a napkin dipped in table vinegar.
• 1.5 tablespoons of citric acid are dissolved in a glass of water, surfaces are wiped with this liquid - the method is applicable for enameled and metal types. If the bath is acrylic, it is filled to the brim with water and the same amount of citric acid is added, left overnight. In the morning, drain the water and rinse.

• Take ¼ cup of lemon juice and dissolve borax in it until a slurry is formed. This mass is applied to problem areas and allowed to dry, washed off with running water. If spots remain, repeat. Suitable for all surfaces and types of dirt.
• Hydrogen peroxide is mixed with any powder, in a ratio of 1:1. The resulting paste is applied to rust spots, left for 10-15 minutes and washed off with water.
• For cleaning enamelled surfaces, ammonia and hydrogen peroxide are very well suited, they are mixed in a 1: 1 ratio, then the bath is wiped with a solution applied to the sponge and left for 10 minutes, washed off with water.
• Dissolve in warm water soda with washing powder (1 tablespoon of dry ingredients per 500 ml of water), wipe all surfaces that require cleaning with liquid, after 15 minutes treat with a brush or sponge dipped in hydrogen peroxide, and rinse with water.
• Laundry soap is rubbed on a grater and mixed with soda ash in equal proportions, a little water is added. The resulting solution is applied and left for 1 hour, rinsed with water.

If you are interested in the question How to wash an acrylic bath?”, then this article is just for you. The peculiarity of acrylic baths is that they are completely unstable to mechanical damage, although they have nice shape. This is something to keep in mind when choosing a cleaner for your plumbing.

Let's look at the main types of products that cannot be used to wash an acrylic bath:

• solvent;

• solid powders.

Since an acrylic bathtub is a rather delicate piece of plumbing, it must be treated with great care. The use of products containing the above substances, as well as the use of boiling water and solid powders, can significantly reduce the quality of the top coat, cause yellowing or cause scratches on the surface of the bath.

“Then how to wash an acrylic bath at home?” - you ask. We will tell you more about this.

To date, household chemicals can offer a large number of products for cleaning acrylic plumbing. With their help, you can easily wash an acrylic bath from yellowness, as well as get rid of limescale and water stone, which is deposited on the bottom, thanks to the quality of the water entering our house. In addition, an acrylic bathtub requires particularly thorough daily care. First, after any water treatment, plumbing must be wiped dry with a cloth, avoiding the presence of moisture on the acrylic surface. This leads to the appearance of plaque and yellowness. Secondly, such a bathroom should be looked after daily, wiping it with a soapy cloth or sponge, rinsing with water and wiping it dry. In this case, the appearance of spots and yellowness is unlikely. But if you still launched the plumbing, then returning it to its previous appearance will not be very difficult. To do this, you need to choose the right cleaning agent and our article will help you with this.

Cleaning chemicals

The list of household chemicals indicated in this table is far from final, because at the moment there are dozens of various products for the care of acrylic bathrooms. You can decide for yourself which one suits you best, but before doing so, we suggest that you familiarize yourself with folk methods cleaning acrylic bathtubs.

Cleaning an acrylic bath with folk remedies

If you are not impressed with household chemicals, you do not want to spend money, and there is little sense from these funds - try using folk ways acrylic bath cleaning. Most of them have been tested over the years and help to cope with most of the problems that arise when operating such delicate plumbing..

Lemon acid helps to get rid of limescale and whiten the bath. To do this, you need to take hot (not boiling) water into the bath, then pour a packet of citric acid into it and leave it for two hours. After that, drain the water, rinse the tub with plenty of water and wipe dry with a cloth. This procedure is recommended to be carried out no more than once every six months.

To get rid of various stains, try to apply on them whitening toothpaste and rub it with your fingers over the problem area. Leave the paste on the surface of the tub for a few minutes, then rinse with water and pat dry.

Via soda and soap solution you can get rid of most contaminants. To do this, apply the solution to problem areas, leave for 20 minutes, then rinse with water. Do not forget to wipe the bath after each water procedure.

Helps fight rust a solution of ammonia and hydrogen peroxide. To do this, mix them in the same proportion, take a sponge, soak it in this solution and wipe the problem area. As a rule, the effect will not keep you waiting.

In the event that the bath is too dirty, this can be corrected with vinegar. To do this, take a bath hot water and add a liter of ordinary table vinegar to it. Leave the water in the bath for 12 hours, then drain and rinse with plenty of water, then wipe the surface of the bath dry.

The effect of one method or another may be different. It depends on your bathtub, the correct operation of it and the composition of the water that enters the plumbing. Someone can help any of these methods, but someone will not be lucky with any of them. This is an individual indicator, so do not rush to scold the tool in case of failure. In extreme cases, if you follow the basic rules for caring for an acrylic bath, then you won’t have to resort to cleaning it from stains or rust. Below is a video with details.

The bath is often exposed to various pollution. In addition to the untidy appearance of plumbing, rust, limescale can become a source of a large number of bacteria, as well as the cause of bad smell. Traces are left by children's toys, shampoos and other products left on the sides.

Therefore, many housewives are interested in the question of how to clean the bath at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help wash a dirty bath from plaque, but also remove rust and other contaminants.

Before you start looking for a way to help wash the bath to white, you need to figure it out with the causes of stains and other stains.

• Soap stain. The result of using various shampoos, bath products and ordinary soap becomes the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it with a simple rinse. This film eats into the surface of plumbing, and it is already impossible to do without detergents.
• lime plaque formed from water of high hardness. This is the most common bathroom problem.
• rust caused by tap water with a high iron content.
• If the bath turned yellow, the reason for this was the old pipes, which are not always well washed.
• usually accumulates on tile joints between parts, on window slopes, on the ceiling. This fungus is very dangerous to health, therefore.
• colored spots may result from careless handling, spilled or spilled potassium permanganate solution, brilliant green and other substances.
• Pollution from ongoing repairs. The bath is very prone to various stains, dust easily sits on it. Therefore, when carrying out repair work, it must be protected with a film or other materials.

At old bath the enamel is full of cracks, into which any dirt easily penetrates.

Main types of pollution

To clean the bath from rust at home will help the following means.

• Ammonium chloride. It is applied to the spots for a few minutes and washed off with water.
• Lemon juice. The method is the same as with ammonia.
• Cooking surface treatment salt and table vinegar.

Rust can also be cleaned with soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

1. Mix two types of soda (calcined and food) in equal proportions.
2. Add water to obtain a homogeneous mushy consistency.
3. Sponge or brush evenly distribute the composition over the surface of the product.
4. Table vinegar and bleach in powder granules are also combined in equal amounts.
5. Apply this mixture to baking soda.
6. Wait 30 minutes and rinse well with clean water.

Rust can also be treated with alcohol and hydrogen peroxide. These components are mixed in the following proportion: one part of alcohol and two parts of peroxide. The sponge is dipped in the solution and all dirty areas are covered with liquid. Washed with water after 20 minutes. Here's how alcohol and peroxide can clean up rust without leaving a trace.

limescale

It is washed off if you clean the bath soda and vinegar.

• Mix baking soda with soda ash, apply to the surface of the product, leave for 30 minutes. After that, rub a little and rinse with water.
• Paper towels are moistened in vinegar, which cover the entire inner surface of the bath. After 5 hours, the towels are removed, and the product is washed with water.

How else can you wash the bath from yellow plaque? Help out lemon acid. 100 g of the product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product with a sponge.

Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help to wash the bath from yellowness.

It often forms in places where the bathroom is adjacent to the wall. Its cleaning is possible activated carbon. Coal is mixed with whiteness to a mushy consistency and the composition is distributed over the mold fungus. Wash off with water after an hour.

Another effective way using soda. How to clean the bath with baking soda from mold? Very simple. It is applied to the problem area in a rather thick layer, then poured abundantly with table vinegar. After the end of the reaction, everything is thoroughly washed off with water.

Ways for different types of baths

How to wash an acrylic bath?

An acrylic bathtub requires careful, gentle handling and the same cleansing. Care should become regular, consisting in rinsing after each use of the product using gentle means.

It is forbidden to use:

• products containing alkalis and acids. They are detrimental to acrylic;
• solutions containing alcohol;
• bleaches with chlorine and other products containing this substance.

Wash an acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will perfectly cope with the task.

An acrylic bath at home is washed from rust and other deposits with table vinegar (which is preheated) and salt. An alternative would be a mixture of the same table salt and turpentine. The same products will help wash the acrylic bath from yellowness.

Because this cleaning method is quite aggressive, test it on an inconspicuous area before cleaning your acrylic bathtub with it. Otherwise, plumbing may deteriorate.

An enamel bath has a top layer that is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed with porridge from water and soda, which is applied to the stain, kept for about one hour and washed off well with water. Whiten the surface of soda ash with the addition of food. Limescale will remove ammonia and fresh lemon juice.

You can also clean the enamelled bath with mustard. It will not only wash off dirt, but also disinfect the surface with high quality.

How to clean an old cast iron bath?

Such plumbing products are characteristic of old houses. The technology for the production of cast-iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.

Wash the cast-iron bath from yellowness with table vinegar. Pour full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This versatile cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning more efficient and effective.

Wash the bath from rust will help good way based on soda liquid soap. From these components, a slurry is prepared, which is rubbed with rust and its streaks.

Ammonia will help out from very old stains. It should be added to 0.5 cups of liquid soap and spread over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean an ancient cast-iron bath, you won’t have to change the product for a new one, and it will last more than one year.

Removal of other types of contaminants

These two components are the most common types of pollution in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.

A drop of brilliant green solution will also add color.

Manganese is washed with a solution of hydrogen peroxide and lemon (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.

We remove the greenery with alcohol. However, if the surface of the plumbing is made of acrylic, then alcohol may be powerless before contamination.

How to wash the bath after repair?

In order not to have to deal with its consequences on a soiled bathroom upon completion of the repair work, the product must be protected from getting building materials. If something goes wrong, you can use by the following means.

• Any solvent (for example, white spirit) will help to wash the bath of paint. It is important to work quickly so that the paint does not have time to soak into the surface.
• Rinse off dusty deposits with warm water, then clean with citric acid.

How to wash the sealant from the bath?

Sealant is another type of bathroom contaminant. It is used to ensure the reliability of joints and seams. Sooner or later the question arises.

In this case, you can use folk methods using table salt, but it is better to buy professional products specifically for such cases.

How to clean an old bath?

If the bath is far from being the first year, then pollution appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.

Not all cleansers can easily restore its original appearance. Better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.

Cleaning chrome surfaces

Faucets above the bath, shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Faucets, handles on the bathroom and other elements are covered with chrome.

From the chrome surface, the universal baking soda, which is applied to the products, will clean the rust. You can also use table vinegar or tooth powder. All components are evenly distributed over the objects with a sponge or soft cloth. Maintained in this state chrome parts about half an hour, then washed with water.

Ways to answer the question of how to wash the bath from various pollution, there are many. Follow the above rules and recommendations, and your bath will shine. But it’s better not to wait for a general cleaning, but to take care of the product regularly, then you won’t have to waste time and effort on removing significant old stains.

home » hip » How to wash an acrylic bath at home? Tips for washing with improvised and special means. How to wash an acrylic bath - tips and tricks Whiteness and acrylic