Do-it-yourself wooden phone stand. Why a phone stand made from stationery clips is ingenious Homemade phone stand

How often, being at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. How to do this, our step by step wizard Class.

How to make a do-it-yourself phone stand: options for office and car

Whether at work or in the car, we all need to always be in touch. At the same time, you don’t want to spend a lot of money on expensive coasters, because they can be made from waste and outdated materials.

The simplest option for a phone holder is a card holder. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, preventing it from breaking.

Experience shows that a plastic card holder is very reliable and can withstand even air travel at times of strong turbulence.

To make a phone stand from stationery clips or from binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and placed on the table so that the larger clamp rests on its surface.

Similar coasters can be made in five minutes from clothespins.

From paper clips great option car stands. To make it, you need to disassemble the large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone, it is recommended to wrap metal fasteners with threads in several layers. We return the holders to their place, additionally fix them with adhesive tape and clerical gum. We fix the clamp on the ventilation shutters. The phone is securely fastened between the metal parts of the binder.

Ordinary office paper, folded in a certain way, can even support the weight of a large smartphone. To make a stand out of paper, you need to measure the dimensions of the phone and adjust the pattern below for them.

Cut out the piece from paper, fold it along the dotted lines and insert the side pieces into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for coasters for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home. Consider options for such products.

A phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We lay knitting needles or wire in the extreme racks to make it more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the “rope” technique or chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

Weave a rectangular blank of the required length. We take out the knitting needles or wire. The ends of the stands are neatly trimmed and trimmed. We give the workpiece the necessary curved shape, if necessary, wetting it a little with water.

Similarly, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. Cut off the excess and hide it. We coat the product with glue, if desired, additionally paint and cover with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

Modular origami is a fairly young, but very popular type of needlework. With it, you can make a lot of unusual and original gizmos, including a phone stand from modules.

To make the stand, you will need double-sided blue and pink paper. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. For it, you will need 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. In the next row, we put three pink modules on the pink section. We begin to make out the curly edging of the stand, as shown in the photo below.

In the back, we form a pattern in the form of a heart, above which we install a number of modules blue color. Gradually narrow the stand until a triangular wedge forms in its back.

Stand of modules is ready!

Video on the topic of the article

We suggest watching the video tutorials below on making other options for phone stands.

It doesn’t matter for what reason you need a smartphone stand, if there is no factory accessory, then there is always the opportunity to quickly make an analog from improvised means. And often we are not talking about disposable coasters, but about those that can be used for a long time.

Stationery clips

Stationery clips or binders will help you quickly and easily build a stand for your smartphone. It is enough to supplement them with any plastic or even paper card and the mount for the gadget is ready. You can build more complex structure from binders alone - as you wish.

Paper or cardboard

If we remember the traditional japanese art origami or google a diagram on the Internet homemade stand from paper, then a smartphone mount can be built literally with bare hands using scissors alone and more or less thick paper or cardboard.

Wine corks

If there are several wine corks, a small amount of glue, a knife and free time, you can make a smartphone stand in just a few minutes. Get a pretty stylish accessory.

Toilet paper roll

A cardboard tube from toilet paper with a couple of knife movements turns into a quite wealthy stand for a smartphone. And if you add a couple more plastic cups, you get a completely portable speaker.

paper clips

If there are no binder clips at hand, but there are at least a couple of large paper clips, then they will fit. With a couple of movements, they can be turned into stands suitable for holding a smartphone.

A plastic card

When a nosebleed needs a stand, and there is nothing at hand but plastic cards, then they can be turned into a holder for a smartphone. It is better, of course, to use unnecessary discount cards or, at worst, gift certificates for this, and bank cards leave it as a last resort, because after completion it is unlikely to use them for their main purpose.

Lego constructor

With enough bricks and a rich imagination, it's easy to assemble a real multifunctional docking station. What's good is that it's just as easy to turn it back into a constructor. And this is perhaps the most versatile way to create a DIY smartphone stand.

Cassette case

These days, it's easier to find a Lego set than an audio cassette case, but if you have one on hand, then the stand is actually ready. You don’t even need to modify anything - just take out the cassette and unfold its case to install your smartphone.

Pencils and erasers

In an office where there are a lot of pencils and rubber bands, but there is not a single stand for a smartphone, one can be made from what is. You just need to tie a few pencils with rubber bands into racks and fasten them together with the same rubber bands.

Roll of tape

Probably the most obvious and easiest option handy stand for gadget. It is enough just to lean the smartphone on a roll of adhesive tape or put the smartphone inside and thereby free your hands. You don't even have to modify anything.

It is logical that the 10 methods presented above do not exhaust the options for creating stands for smartphones. Almost everything that is at hand can become a holder for a gadget, if you show imagination.

Homemade mahogany smartphone stand.

Hi all! Today we will do for mobile phone in the form of a dog - a symbol of the year.

Now you need to make a stand for it. To do this, we cut out a circle with a diameter of 70 mm from wood. Sand it down with sandpaper.

We take a few gears that are so small.

We also take epoxy and hardener.

We take plasticine and apply a thin layer on one of the sides of the internal cavity of the figurine and glue it with polyethylene on the same side.

We knead the epoxy glue according to the instructions and pour about 2 mm into the cavity of the figure. This will be the first layer. We are waiting for the solidification of this layer. Then lay out our pattern of gears and fill in the rest.

Our dog is dry.

We remove plasticine. We take sandpaper and bring everything into a divine form.

We mark with a pencil on the figure the point where the hole will be.

Drill make a small indentation.

Now we make a wooden chop that will fix it all. We insert the chopstick into the stand, spread it with PVA glue and also the lower part of the figure with a thin layer so that the glue does not protrude. We connect. Leave until completely dry. Next, we rub our entire product with herbalist impregnation.

Here's what we got.

With a phone holder, you will not spend a lot of time looking for a mobile device. It will also be well protected. It is less likely that someone will drop it, step on it or spill tea, and most importantly, while driving a car, you will not be distracted. For aesthetic reasons, it can become great decor for car interior.

The simplest holder is a handlebar design with silicone loops. The adjustable bracket on the panel, into which the gadget is inserted, is characterized by the fact that it is compact and the phone is easy to install. Another very simple holder is a ball on a magnet.

Designer coasters are made from various materials, have different forms- it all depends on the creativity of the master. For example, there is a lawn on a plastic stand, and a phone holder at the bottom.

The gadget holder can be made as an elegant wooden stand. For example, in the form of a tree with a hollow or improvised stumps. A neat wooden stand with randomly arranged slots where a mobile phone is inserted will look original.

wooden stand can be very concise and resemble a photo frame where a smartphone is inserted. A wooden organizer on the panel can have not only a cell for a gadget, but also for pens and watches. A wooden stand in the form of a figurine supporting the phone looks original, only it needs to be well fixed.

Sometimes phone holders in the absence of a gadget are a nice souvenir. For example, a gadget stand in the form of a rotary phone looks original, showing the connection of times. Or look unexpectedly creative when the holder is an alarm clock into which a mobile phone is inserted.

Conceptually, the holder looks like a marble figurine holding a gadget in its hands. Even in winter, a shell stand will evoke memories of the sea. The stand can look like your favorite food, like sushi, a hamburger, or a caviar sandwich. In such souvenirs, the craziest fantasy can turn into reality.

The highlight of the holder in the style of minimalism will be the original mount. For example, according to the principle table lamp attached to a clothespin to the table. Even an ordinary stationery binder will look original in the form of a phone holder.

It is worth looking at things with different eyes and arrange a cozy soft pillow or chair for the phone. If a woman is driving, it can be a fluffy basket, an original fabric pocket, a soft envelope on a pretty hinged loop. Knitted animals in the form of a coaster will always help to save good mood. Stylish bright accessories will not only serve you by performing certain functions, but will also help you think positively.

The holders can have a flexible cord for fastening, a suction cup, an adjustable bracket.

In choosing a stand for the phone, everyone is guided by their taste preferences. In terms of functionality, the holder must have a good fit so that the phone is secure.

How to DIY

From paper clip

A device that supports the phone can be made by hand. Such a stand will definitely be exclusive.

Homemade holders can be of three types:

• spoiling the salon;
• not distinguished by strength;
• representing a whole work of art that requires real skill.

We take the binder, remove the staples, bend them so that a holder is formed, wrap them with a thread and put them in their original place, securing them with an ordinary rubber band. It remains to attach a simple device to the duct. The phone is secure. The only negative is that the phone cannot be quickly removed from the holder.

From wire

In order to fix the phone on the wire holder, you will have to sacrifice the integrity of the front panel of the cabin, since holes will need to be drilled on it. The holder is made of strong wire, bending it in an appropriate way and inserting it into the holes. The phone must be firmly attached to the holder.

Aluminum column

It will take a little effort to make a stand out of aluminum. In any hardware store, you can inexpensively purchase connecting tubes with angles of 45 and 90 degrees, as well as an aluminum pipe with a diameter of 47 mm. You will need more ice cream sticks, an old phone case.

You can start creating the holder after the place where it will be located is determined. Now the necessary measurements are made. The pipe is cut into three parts. The short part is attached to a 45 degree angled tube. The horizontal part is held in 45 and 90 degree angle tubes. The longest part - a vertical pipe, 10 - 13 cm long, will hold the rack.

For greater strength, all fasteners are first lubricated with glue. A couple of cuts should be made in the case into which the ties are inserted. The cuts are on the tube. A long pipe is pulled together with ties. Wooden sticks are glued between the aluminum pipe and the case. The final step is to attach the connecting tube to the car.

Who among us does not like to watch TV shows or movies while you cook something in the kitchen or eat. The phone is not a laptop, it will lie flat on the table. To look at something like that on it is, to put it mildly, uncomfortable. You can buy a special stand to fix the phone in a vertical position, or you can make it yourself from improvised materials. For example, it can be ordinary stationery clips.

How to make a DIY phone stand from stationery paper clips

There are several ways to make a stand from clips. Let's talk about simple and more complex.

Method with two clamps of different sizes

What you need for making: one large clip and the second smaller one - medium or small. Nothing else is needed.

Buy two clamps of different sizes

You only need to connect these two stationery tools in a certain way:

Method with two clamps of the same size

The clamps can be the same size. Then you just need to connect them in a different way: bend the handles of one clamp in the same way and connect them, but place not them in the other clamp, but the very base of the clamp. Place the phone between the handles of the attached binder.

The stand can be made from two clips of the same size

Another method using clips of the same size. In it, we additionally need a sheet of paper. Its width will be equal to the width of the clamps, and its length will be equal to the height of your phone. Just clamp the edges of the paper with clips on both sides. The bottom handles of the binders will be the base of the stand, and the top handles will be the holders. Place your phone between the top handles.

Attach two clips to a piece of paper

Single clamp method

If you only have one clip, you can still make a stand out of it. The advantage of this option is that you can attach this stand to any item that will "take" the clip.

Additionally, insulation from the wires is still needed (for the previous methods, it can also be used). This is optional, but it is desirable that the paperclip does not scratch the phone. You also need a small piece of fabric and an elastic band (any, you can use a small one for hair or a few clerical ones).

Isolation from the cable is needed to soften the landing of the phone on the stand

So, let's start assembling the stand:

1. Carefully pull the handles out of the base of the clamp and bend their upper round parts inward with the help of pliers (use a piece of cloth so as not to scratch the clamp handles). These folds will help secure your phone to the stand.

   Take the handles out of the clamp

2. We put the insulation on the handles, and insert the handles back into the base of the clamp.

   Insert the wire into the insulation

3. If desired, we put the insulation (already cut) on the lower edges of the base of the clamp.

   

home » Material » Do-it-yourself wooden phone stand. Why a phone stand made from stationery clips is ingenious Homemade phone stand