Fresh, clean air at a comfortable temperature and humidity in your apartment, office or home. Fresh, clean air at a comfortable temperature and humidity in your apartment, office or home Supply ventilation mode

FAQ& answers

Does the breather cool the air? What is the difference between a breather and an air conditioner?

The air conditioner cools the air, but does not ventilate the room (does not supply fresh air from the street for breathing) and does not relieve stuffiness when the windows are closed. The external unit of the air conditioner is needed to cool the coolant, from it to indoor unit only a thin tube with freon goes, and air from the street is not supplied to the room. The breather does not cool the air, but ventilates the room, supplying purified air from the street. The main function of the breather is to provide the necessary fresh air for breathing, to get rid of stuffiness with the windows closed. Thus, the breather and the air conditioner complement each other, allowing both to cool the room and supply fresh purified air from the street, getting rid of stuffiness.

What is the difference between a breather and an air cleaner, air washer and more?

Air purifiers and air washers do not provide an influx of fresh air, "chasing" the air inside the room. Depending on the level of the purifier, it may be better or worse at removing pollutants from the air, but it will be stuffy with the window closed. If you open the window, all the dirt and allergens from the street will pour into the apartment, as a result, the effectiveness of the cleaner will become barely noticeable against the background of the flow of dust and dirt from the window.
Breezer, on the contrary, does not “drive” the air inside the apartment, but purifies the street air, supplying it inside. At the same time, dirty air inside the apartment is replaced with clean air and forced out through a natural exhaust. Thus, the breather not only performs the function of a cleaner, but also does much more - it saves not only from pollutants and allergens, but also from stuffiness with closed windows.

Does the breather humidify the air? What is the difference between a breather and a humidifier?

The breather does not have a humidification function. It supplies air with the same absolute humidity into the room as it does outside. If the room is humid, and the street is dry, due to the operation of the breather, the humidity is normalized. A humidifier increases the humidity inside the room, but does not relieve stuffiness. If the humidity of the outdoor air is too low for you, then a humidifier can be used with the breather.
In what rooms is it better to install a breather?
The device is recommended to be installed in those rooms where people spend the maximum amount of their time, i.e. where they “breathe” the most: nursery, bedroom, living room. One appliance can serve one room.

Why is a breather better than an inlet valve?

The efficiency of the inlet valve directly depends on the operation of the hood. If the hood does not work well, then the valve will work poorly. Also, the valve has practically no cleaning and no heating. AT winter time he submits cold air creating drafts and may even freeze. The Breezer also has low-noise fans, three-stage cleaning and climate-controlled heating. Thus, the Breezer will supply clean, fresh and heated air to the predetermined temperature into the room.

How to check the efficiency of the hood?

Very simple, open the window in the room and lean a regular A4 sheet against the exhaust outlet in the kitchen or toilet. The sheet should stick. If it does not stick, then the hood is not working well.

Why can the extractor hood work poorly?

First, the exhaust duct may be clogged. It is often not possible to clean it. Secondly, the operation of the hood is provided by a pressure drop in the exhaust duct. This difference is provided by the following factors:
1. Temperature difference. When it is cool outside and the room is warm, the difference is good and the hood works well. When it is warm outside and the room is warm, there is no difference and the hood does not work well. In hot weather, the hood may even start to work in the opposite direction and you will smell the smells that will come to you from the neighbors.
2. The height of the exhaust duct. Simply put, the higher you live, the worse the hood works. On the last and penultimate floors of the house, the hoods usually practically do not work.
3. Forced air injection into the room. This is exactly what Breezer provides. It creates excessive air pressure, which forces the air to move towards the hood, taking with it the pollution and odors that form inside the room.

Can the room be ventilated with an exhaust fan?

The exhaust fan is only effective if there is air flow. If you close plastic windows and turn on the fan, you will only get the effect of rarefaction (as when an airplane takes off, it can even lay your ears), but the ventilation effect will be close to zero and you will not get fresh air. It can be provided by opening windows or by installing a valve, which will lead to the corresponding problems - drafts, freezing, street dust and dirt.
At the same time, for Breezer to work exhaust fan not needed, because The breather itself creates pressure, which will force the air to go into the hood.

Why is a breather better than an Aeropack ventilator?

Aeropack has no heating at all and has poor air purification (50% versus 99% for Breezer).

How often should Tion O2 be turned on?

It is recommended to use the breather around the clock. If there are people in the room, they constantly “eat up” oxygen and exhale carbon dioxide, which means that the influx of fresh air must be constant, like people’s breathing. If there are no people in the room, it is still recommended not to turn off the device: furniture, Decoration Materials and pets can constantly emit harmful substances, allergens and odors. The influx of fresh clean air from the breather will force these contaminants into the natural exhaust, so when you return to the room, the air will be clean and fresh. We recommend turning off the breather only for a period of long absence.

How many appliances do I need for my house, apartment or office?

The simple answer is one appliance per room.
A more detailed calculation can be made by the number of people in the room and by its area. According to SNiP 31-01-2003, 30 m3 of fresh air per hour should be supplied per person or, according to SP 54.13330.2011 - 3 m3/hour per 1 m2 of premises. The capacity of Tion O2 is up to 120 m3/hour, respectively, one Tion O2 unit provides fresh air for up to 4 people in one room up to 40 m2. As a rule, devices are installed in rooms where people are constantly present.

How is the breather installed and how difficult is the installation?

The Tion O2 Breezer is easier to install than an air conditioner. The main task during installation is to make a hole in the wall with a diameter of 132mm. Installation of the device usually takes about 1 hour and will not harm your repair. Eros installation teams use professional equipment for diamond drilling, which is connected to an industrial vacuum cleaner with water supply to wet the dust. This allows you not to leave dirt and dust after work.

Is it possible to install the device in a house with an insulated facade?

Can. When communicating with the operator, it is necessary to inform about the presence of a ventilated facade on the house and clarify its material. If it is a facing brick, then the installation is no different from the usual. If these are composite sheets, then it is only necessary to choose a place for the device so that the hole does not fall into the profile to which the facade sheets are attached. If it is porcelain stoneware, then there are 2 installation options: either install a ventilation duct "under the facade", without outlet to the outside, or drill through the ventilation facade, while the quality of the incoming air and the installation price will be the same in both options.

Is it necessary to coordinate the installation of the breather?

No, according to current building codes, holes smaller than 200mm are not required to be approved. The hole is closed with a decorative grill from the street, so it does not spoil appearance building, as opposed to outdoor air conditioning units.

Does the thickness or material of the wall affect the ability to install a breather?

The breather can be installed on any wall - brick, reinforced concrete, wood, etc. at the same time, the installation cost will be fixed for any wall thickness.

I have a loggia behind the outer wall, how can I install the Tion O2 breather?

There are 3 options:
1. If there are no plastic windows on the loggia or their constant position in the ventilation mode is allowed, then you can install the breather so that it takes air directly from the loggia. This does not interfere with the flow of fresh air either in summer or in winter. In addition, in winter, even on an uninsulated loggia, the temperature is higher than the street temperature, which will allow you to spend even less energy on heating the air. This installation option is common in new houses, where the loggias are glazed already at the construction stage.
2. If there are sealed plastic windows on the loggia and / or the loggia is completely insulated, then two holes are made: one in the wall between the room and the loggia, the second - directly in the outer wall of the loggia. A flexible duct connects both openings, the air is taken directly from the street. In this case, the device is located in the room in such a way as to minimize the length of the duct.
3. If the loggia is fully insulated and connected to the room, then the hole is made directly on the partition of the loggia and the device is placed on the partition. In this case, it is necessary that the door to the loggia always remain open.

How much does the Tion O2 breather cost?

The breather in the standart configuration costs 27,900 rubles without installation, in the base configuration - 25,900 rubles, light - 21,300 rubles. The delivery set includes: installation with a cascade of filters (in the standart configuration) or with one f7 basic filter (in the base and light configurations), a remote control, a mounting template, an instruction manual, a warranty card.

How much does it cost to install a Tion O2 breather?

The cost of installing Tion O2 depends on the region. The lower bar recommended by Tion at the cost of installation is 4000 rubles.

How often do filters need to be changed?

Tion O2 Standard uses 3 filters at the same time: basic F7 (pre-cleaning), high-performance HEPA filter H11 and adsorption-catalytic filter. The recommended period for replacing a set of filters, subject to periodic cleaning of the base filter with a vacuum cleaner, is once a year. Eros undertakes to remind its customers of the possible need to replace filters after a period of time agreed with the customer.

How much do Tion O2 filters cost and where can I buy them?

The basic f7 filter costs 1590 rubles, the high-performance hepa filter is 1990 rubles, the adsorption-catalytic filter is 1590 rubles. You can order filters by calling 8-800-500-57-36 from any city in Russia or by leaving a request on the website

How much electricity does the device consume?

In the mode of operation without heating up to 40 watts. At maximum power heating from -40 s to + 25 s - 1.3 kW. On average, energy consumption during the year will be about 100 kW per month.

Can Tion O2 filters be washed or vacuumed?

How noisy is the device?

At the first speed, the device works no noisier than an air conditioner, and this does not interfere with most people's sleep. The noise level of the second and third speeds does not exceed 40 dB (A), which does not cause discomfort for most people during the daytime. Therefore, at night it is recommended to use the first speed, and in the daytime - the second or third. The fourth speed (turbo mode) is designed to quickly ventilate the room and is usually used after turning off the device for a long time.

At what temperature does Tion O2 work?

The system operates at an air temperature at the inlet to the device from -40C to +50C. At temperatures below -40C and above +50C, the device automatically turns off the air supply from the street and closes the damper.

What is the warranty period for Tion O2?

1 year from the date of sale. The company "Eros" undertakes full warranty and post-warranty maintenance of devices. If the device fails, we will come and take the device for diagnostics and repair, and for this time we will install a replacement device for the client free of charge. Thus, our customers do not experience discomfort due to possible problems with the device.

What is the duration of the breather and what is it due to?

The standard operating life of the device is 5 years. However, this is largely a conditional figure, more important for the buyer's accounting for the possibility of depreciation and write-off of equipment. The actual service life is much longer. This situation is similar to cars - the standard service life for a car is about 6 years, while we understand that with careful handling and timely maintenance and repair, cars “run” for 50 years. Therefore, the breather will last 10 years or more, with careful handling and timely maintenance and repair.

Where to contact in case of breakdown / failure of the device?

The company "Eros" undertakes full warranty and post-warranty maintenance of devices. If the device fails, we will come and take the device for diagnostics and repair, and for this time we will install a replacement device for the client free of charge. Thus, our customers do not experience discomfort due to possible problems with the device.

Where is the device manufactured?

The breather was developed in the Academgorodok of the city of Novosibirsk: Producer: TION group of companies, Novosibirsk. Address: Russia, 630090, Novosibirsk, st. Engineering, 20. The main stages of the assembly of devices are made in China according to the manufacturer's documentation (GK TION) and under his control. The final assembly of devices, their testing and completion with filters is carried out in Novosibirsk.

The main difference between this unit and other competitors in its class is that Tion initially includes absolutely all the elements and functions of a full-fledged ventilation unit.
The second difference is the filter elements. The ventilator uses filters with the maximum possible surface area for this device, in other words, during operation, expensive filters will have to be changed much less frequently than in other air handling units. The only exception is, perhaps, in which the filters are as effective and have the same long service life as in Tion installations.
The third difference is that not every ventilator is equipped with a wireless control panel, which greatly simplifies the control of the air handling unit.

Configuration and price Breezer Tion 3S

Breezer Tion 3S Smart	Breezer Tion 3S Standart
Price: 47 990 rubles	Price: 38 990 rubles
Air heating Primary filter G4 Fine Dust Filter HEPA E11 (H11) up to 140 m3/h Base station of smart microclimate system MagicAir included	Air heating Fine Dust Filter HEPA E11 (H11) Harmful gas filter AK-XL Remote control with LCD display up to 140 m3/h

Breezer Tion 3S Special	Breezer Tion 3S Plus
Price: 37 990 rubles	Price: 46 990 rubles
Air heating Primary filter G4 Fine Dust Filter HEPA E11 (H11) Remote control with LCD display up to 160 m3/h Can be connected to the base station of the smart microclimate system MagicAir	Air heating Primary filter G4 CO2 sensor Fine Dust Filter HEPA E11 (H11) Harmful gas filter AK-XL Remote control with LCD display up to 140 m3/h Can be connected to the base station of the smart microclimate system MagicAir

Configuration and price Breezer Tion O 2

Breezer Tion O 2 Lite	Breezer Tion O 2 Base
Price: 19 900 rubles	Price: 23 990 rubles
No air heating Coarse dust filter F7 Remote controller remote control* Performance up to 130 m3/h	Has air heating Large filter dust F7 Remote Control Performance up to 120 m3/h

Breezer Tion O 2 Lite	Breezer Tion O 2 Base
Price: 25 990 rubles	Price: 26 990 rubles
Has air heating Large filter dust F7 Filter from harmful gases AK Remote Control Performance up to 120 m3/h	There is air heating Coarse dust filter F7 Fine dust filter HEPA E11 (H11) Filter from harmful gases AK Remote control Performance up to 120 m3/h Can be connected to the base station of the smart microclimate system MagicAir

Tion 3S and Tion O 2 ventilators have 3 stages of air purification

1. Preliminary dust filter. This filter cleans the air from mechanical pollutants contained in the air with a size of more than 10 microns. The filter complies with the G4 purification class and purifies the air from plant pollen, poplar fluff and other large pollutants. The filter is reusable and can be washed in warm water. The recommended filter cleaning interval is once every 3 months.

Price: 690 rubles.

2. Fine HEPA filter. This filter corresponds to class 11 (H11) and cleans the air from fine dust, soot and all other pollutants larger than 0.3 microns. The filter is disposable and cannot be restored.

3. AK-XL filter.The final stage of air purification is an adsorption filter.Here the air is purified at the molecular level. The content of the filter is Activated carbon, which allows you to clean the air from odors and other pollutants at the molecular level. The filter is disposable.

AK-XXL filter. Not included in delivery. Can be used instead of a HEPA filter. Differs in greater dirt capacity and is intended for people living in close proximity to highways, factories, factories, smoking neighbors. The filter is disposable and cannot be restored.

The principle of operation of the air handling unit Tion 3S

When the unit is switched on, the air damper opens ( 8 ) and through the hole located at the bottom of the installation housing, air from the street is sucked into the device.
Then the dirty air enters the preliminary dust filter ( 7 ), where it is cleaned of coarse dust and then goes to the HEPA filter ( 6 ) and then it enters the final filter ( 5 ), where it is cleaned of odors and molecular contaminants. After the air is completely cleaned of contaminants, it passes through the heater ( 4 ). The air then enters the fan ( 2 ) and completely cleaned and heated to a predetermined temperature, is fed into the room. The pre-filter (9) traps large particles and is used in two modes of operation of the ventilator: recirculation mode and mixed mode.

The unit can operate in 3 modes.

1. Recirculation mode when the ventilator takes air not from the street, but from the room in which it is located. In this mode Supply unit becomes a professional air purifier.
2. Mode supply ventilation when the device completely draws air from the street.
3. Mixed mode when the ventilator draws air in equal proportions both from the street and from the room.

Using the control panel with a liquid crystal display, you can set the required settings and fully control the ventilator from a distance.

Control of the supply unit Tion 3S

Air handling units in any configuration are equipped with WiFi and Bluetooth modules. You can control the ventilator with a remote control included in each unit, or with your smartphone via Bluetooth using the application for:

Android on Google Play and iOS on the App Store

Thanks to the remote control, the unit can be turned on and off, set the required temperature for heating fresh air in winter period and completely turn off the heating in the summer. You can also adjust the intensity of air supply to the room and set the timer to automatically turn the ventilator on and off at a specified time. The display of the control panel shows all the set information, including the number of days remaining until the filters are changed. Read more in:

Tion 3S can be controlled using the MagicAir station.

MagicAir base station with CO2+ module

MagicAir Base Station with Control Module carbon dioxide CO 2 + make up the smart microclimate system. The base station allows you to connect up to 40 different devices. At the moment, these devices are Tion air handling units, but developments are being actively carried out in this area and soon it is planned to connect not only ventilators, but also air conditioners, humidifiers, etc. That is, this station will perform the functions of a smart home.

Today, by installing one station in any place convenient for you and several ventilators with CO 2 + sensors in each room, it becomes possible to control the air quality in each room. Having set the required CO 2 + concentration values ​​for each room, the base station will automatically turn on and off the air handling units, thereby providing ideal conditions ventilation in each room and significantly saving your money.

Communication between the station, air handling units and CO 2 + sensors is carried out via WiFi and does not require any wires, which allows you to organize this system automatic ventilation even in already renovated premises. The MagicAir system is suitable for both Tion 3S and Tion O 2. Read more about the MagicAir base station here:

The difference between the Tion O 2 air handling unit and Tion 3S

Tion O2	Tion 3S
Air outlet, bottom, horizontal	Top air outlet, vertical
Mode of only full inflow of air from the street	Air recirculation mode, full inflow from the street, mixed mode
The electrical cable cannot be hidden in the wall	Concealed wiring possible
Minimum noise level 32 dB	Minimum noise level 19 dB
Maximum air flow 130 m3/h	Maximum air flow 160 m3/h
Fan speed - 4 speeds	Fan speed - 6 speeds
Warranty period -1 year	Warranty period -2 years
Remote Control	Remote Control

Air handling unit installation

The leader of sales among forced-air installations - breather. Tion 3S is a 2 in 1 multisystem: a supply unit and an air cleaner with the possibility of simultaneous operation in both capacities. For the convenience of customers, the manufacturer produces the device in three trim levels: Tion 3S Special, Standard and Smart.

For customers who are wondering which breather to choose, we have prepared a comparative analysis:

​

1. Performance. Tion 3S is more powerful (140-160 m3/h depending on configuration) and is designed to provide air for up to 5 people in a room up to 40 sq.m. The capacity of Tion O2 reaches 120 m3/h, this volume of air is enough for 4 people.

2. The noise level in Tion 3S is significantly lower than in Tion O2 due to the use of noise-absorbing material along the entire body - from 19 dB at the 1st speed to 47 dB at the highest. In Tion O2, the noise level is 32-52 dB.

3. Recycling. Tion 3S has additional mode recirculation, thanks to which the breather purifies not only the air coming from the street, but also the air circulating inside the room (which is always important, because the materials used in construction, furniture and furnishings produce dust and toxic substances). A mixed mode of operation is also provided, in which air is taken from both the street and the room in equal proportions, which reduces heating costs in the cold season. There are no such modes in Tion O2.​

4. Filtration level in both modifications of the breather is almost the same. The class of the basic filter in Tion 3S is lower (G4, not F7), but it is equipped with a coarse dust prefilter. The preset set of filters differs depending on the configuration of the device. All configurations of the Breezer 3S are equipped with a basic dust filter and a medical grade HEPA filter; adsorption catalytic filter is pre-installed in the Smart and Standard trim levels. From the Tion O2 line, the Standard package includes all three filters, while the Base and Lite package includes only the basic one. Any breather can be equipped with an AK-XXL high-capacity filter that protects against unpleasant odors, smoke, exhaust, industrial emissions, etc.

5. Management. In Tion O2, control is carried out using the buttons on the instrument panel or from the remote control. There is no display and buttons on the Tion 3S case, but its remote control is equipped with a mini-display and a Bluetooth module, and it is additionally equipped with a control button with LED indication. When purchasing the MagicAir microclimate control system, control can be carried out through a free smartphone application.

6. Number of speeds fan operation: 6 steps in Tion 3S, 4 steps in Tion O2.

7. Air direction in Tion O2 - frontal, at 30 degrees upwards. In Tion 3C, the air goes up through two gratings on the upper wall of the breather. It is possible to install it "upside down".

8. Hidden wiring. In Tion 3C, the possibility of both a standard connection via a cable to a socket and a hidden connection is implemented, in which the power lines to the device are connected inside walls and special building structures. In Tion O2, only connection via an electric cable is provided, the connection of hidden wiring is possible, but not by regular means.

9. Climate control - the function of automatic activation of heating when the supply air temperature drops to a user-defined value - is provided in both Tion O2 (heating up to 25C) and Tion 3S (up to 30C). Both breathers have the ability to turn off the heater.

Do you know…

How to protect yourself from the suffocating city smog, noise, car gases in your house?

How to negate dry cough in the morning, allergies and frequent bronchitis?

How to deal with stuffiness in the house, unpleasant odors, eternal dust, bacteria and microbes?

What can be done to create a pleasant atmosphere at home and the health of family members?

The Tion 3S ventilator, a modern compact device that is installed in the house, will help you with all this. With him you:

you can enjoy clean and fresh air in the house with the windows closed.

Protect yourself from street smog, car exhaust, noise, draft.

Forever and ever eliminate the spirit bad smell from pets, cooking.

Get rid of cough, allergies caused by dust bacteria, pathogenic viruses, dangerous compounds that were in the air.

And most importantly - you can breathe fresh air day and night, at any time of the year!

All this will be possible thanks to the Tion 3S breather, which combines wall-mounted supply ventilation and a modern air purifier. This is device 2 in 1- even with the windows closed, you can ventilate the room, clean and renew the incoming air and also heat it up in winter.

It's important to know! 5 features of Tion 3S

Plus, the air handling unit has a compact size, laconic design, which will not stand out from your interior.

Specifications of different models

Which model suits you?

We will pick up a breather for you right now!

Design features of supply ventilation Tion 3S

In a durable case made of ABS plastic with reliable sound insulation, there are:

• Fan motor- an operating mechanism that drives the fan to supply air;
• Fan impeller and volute- reliable devices for the supply and promotion of incoming air;
• Ceramic heater- fireproof, not burning oxygen, it heats the incoming air to a predetermined temperature.
• Adsorption catalytic filter AK-XL- deeply cleans the air from smoke, industrial gases and other harmful emissions. For effective work needs to be replaced once a year!
• E11 class high efficiency filter (H11)- thoroughly cleans the air from bacteria, viruses, mold and dust spores, fungi and dust, eliminates allergens. For effective work requires replacement every 2 years!
• Primary filter G4- 90% filters out large/medium particles of soot, fluff, dust from the air. For effective work requires replacement once a year!
• damper- does not let in cold air from the street when the device is turned off.
• Prefilter- protects against insects (mosquitoes, midges, flies), fluff, animal hair.

How does the Tion 3S air handling unit work?

In recirculation mode, indoor air purification:

In supply ventilation mode:

Mixed mode:

Who is the manufacturer

The Russian company TION (Novosibirsk) is a research and production enterprise that specializes in the development and production of household appliances for air purification and ventilation. TION products are certified in Russia, the CIS and the European Union.

Where is it needed and how is the Tion 3S breather installed?

Due to its features and characteristics, this breather can be installed:

• In residential apartments and houses.
• In cafes, restaurants and other catering establishments.
• In children's institutions.

Supply ventilation is installed on the wall, at any stage of repair or already in the finished room. Coordination for installation is not required! Installation takes up to 1 hour. The installation steps are as follows:

• Choosing a place to place the device. The breather is mounted on the wall, in a convenient place for consumers.
• Mounting. Specialists make a through channel in the wall using diamond drilling. From the side of the street, it is closed with a decorative grill, from the side of the room - with a device. Dirt, dust, damage to the walls does not remain.
• Connection. The breather is securely fixed on the wall, connected to the air duct, connected to the mains.

Why is it beneficial for you to contact us

We provide a free consultation and quote

Call us right now and call a specialist for the selection of supply ventilation for free.

Convenient payment options for you

You can pay by card or cash, arrange installments without overpayments.

The essence of the work of the breather is very simple. A hole of sufficient diameter is made in the wall of the house so that a medium-sized elephant can stick its trunk through it. A device is hung on this hole, which draws in fresh outside air, cleans it, heats it if necessary and supplies it to the room:

The effect of the breather is very pleasant - the room is ventilated all the time, as if the windows are constantly open, and the humidity level is high enough that there is no need for a separate humidifier. At the same time, the breather does not let in drafts, noise, or street dust, so we get all the benefits of fresh air, but without the disadvantages of open windows.

Of the minuses - the breather takes up space on the wall, the breather makes a little noise during operation, the breather is powered by electricity, which costs money. Filters, again, occasionally need to be changed to new ones. The cons do not outweigh the pros, so I recommend the device for installation:

Now about the new model of the breather (Tion 3S), which I installed a couple of weeks ago. To be honest, I doubted that the new model would be different from the old one, but there really are differences - both for better and for worse:

1. The main difference is a small box of MagicAir, which is hung on the wall or placed on a shelf. It controls all devices in the house via radio. This thing is configured in a few minutes, after which you can set the operating modes for all the breathers in the apartment and forget about them:

I once specified in the settings that the breather should turn on when the carbon dioxide content in the air exceeds 800 ppm, and now the breather only works at night when my lungs fill the bedroom with carbon dioxide.

Electricity, respectively, is also spent less. In summer it doesn't matter, because if the breather does not need to heat the air, it consumes only 18 watts, like a small light bulb. In winter, however, energy consumption is greater, at maximum power, when heated from -40 to +25 degrees, the power increases already to 1.45 kW, which is significant. For St. Petersburg (where the temperature rarely drops below -20 in winter), you can count on 300 rubles a month, on an average annual basis. MagicAir saves some of that money.

I also set a limit, forbidding the breather to run faster than the first speed. Thanks to this, the breather is always quiet and does not wake me up, even if it has to turn on at 3 am.

In my opinion, this is exactly how all smart home systems should work - once you quickly set it up, and then the smart home does everything on its own, without requiring attention from the owner. I repeat once again: there are no wires there, I connected the devices via a radio channel and forgot.

By the way, the old breather, Tion O2, can also be connected to MagicAir. In some modifications, there are already special modules for this, but in my breather, such a module will need to be ordered separately. This is my plan for the near future.

2. The old breather is easier. It is clearer, it can be removed from the wall in one movement to show the guests the hole leading out. Guests invariably look inside and admire the flow of fresh air.

The new breather, alas, is pressed against the wall with two self-tapping screws, so I don’t want to remove it without much need.

3. The new breather looks better, fits better into the interior. In addition, it has a compartment inside where you can wind an extra power cable so that it does not hang down and does not take up extra space on the wall.

4. The old breather shows directly on the screen how many days are left until the filter is replaced. The new breather has to go deep into the application for this information.

5. The old breather smelled like freshly unpacked equipment for the first few days. The new Breezer smelled nothing from the very beginning.

6. The new breather is quieter. The old breather was slightly audible even at the first speed, the new one at the first speed is audible only if you come close to it.

It’s not that that noise really bothered me, for my taste, moderate “white” noise is sometimes even better than total silence, especially since the maximum 32 decibels at first speed is something between a needle drop and a quiet whisper. However, since I undertook to compare, it should be noted that the new breather is quieter.

As a price for silence, we received hard foam spacers that take up the entire volume of the new breather. When changing the filter, they will have to be removed and then inserted back.

7. The new breather was installed faster, and it was installed by one person, and not two, like last time. It is clear that this is the merit of more qualified installers, and not a breather, but nevertheless, there is a difference.

8. The inlets of the old and new breathers are located differently. I hung the old breather from the bedroom to the study, and in the bedroom there was a fragment of damaged wallpaper, which was previously covered with an old breather. I masked this fragment with a MagicAir box.

Breathers also blow out air in different ways, the old one from the bottom, the new one from the top. From the top, in my opinion, it's better - fresh air is right under the ceiling and then slowly sinks down. However, in the office where I moved the old breather, the old version turned out to be more convenient.

9. The new Breezer (Tion 3S) has a remote control with a screen and a mount to hang it on the wall. The old breather (Tion O2) has a remote control without a screen and without a mount, it's not so convenient.

On the other hand, only those who do not have the MagicAir system need a remote control, manual control is practically not used in the presence of automatic control: everything is configured once through the application on the smartphone, then you can forget about the breathers, they work independently.

Let me summarize

Our Skolkovo is often scolded - they say, nothing is being done there. The reproaches are not entirely fair; Skoltech still managed to breathe life into many projects. The MagicAir system was created exactly there:

I think MagicAir has great export potential. One of the advantages of Russian technology is convenient, intuitive interfaces, which is very important for smart home systems. Neither our Western partners, nor even Asian engineers, are able to make things really convenient.

home » Decking » Fresh, clean air at a comfortable temperature and humidity in your apartment, office or home. Fresh, clean air at a comfortable temperature and humidity in your apartment, office or home Supply ventilation mode