DIY homemade from improvised means. What homemade products for the household can be done with your own hands

Crafts made from old items and things that can be given a second life can make your home much more comfortable. Some made homemade products for household with their own hands can significantly save the home budget, make work easier or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

DIY for the home workshop

In almost any home there is always some set of tools necessary for the household. But sometimes situations arise when working in your own workshop or garage requires some kind of device that is either impossible to purchase in a store or is very expensive. In this case, the way out can be found by making it yourself.

Blacksmith's forge from a cylinder

This device for heating metal will become an indispensable assistant in the home workshop. The forge can be safely used to make original items using artistic forging. These will be truly unique forged items.

For the bugle, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut off by a grinder, and the hearth door and its back will be made from the cut parts. The inside of the cylinder is covered with refractory ceramic wool, which is able to withstand temperatures of more than 1200 0 C. From above it is coated with fireclay (lined) that can withstand temperatures up to 1500 0 C. Fireclay slabs or refractory bricks are laid on the bottom of the hearth after lining.

A hole is drilled from above and a small drive is inserted, which allows inserting the nozzle of a gas-powered burner, which can create a temperature of more than 1000 0 C in the furnace - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane beam

In the manufacture of such a lift, the cash costs will be much less than buying a factory model. For its manufacture, you will have to spend money only on materials, half of which, perhaps, can be found in the garage.

Materials needed to assemble the lift:

1. two racks - profile pipe 100x100x2350.
2. The transverse bar is a steel pipe of arbitrary length with a diameter of 100 mm.
3. Four supports for the rod - profile pipe 100x100x600.
4. The basis and braces - a corner with regiments on 100 mm.
5. Two metal rollers for the cable.
6. Four wheels for movement.

For the lifting mechanism, it is best to use a hand winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, moves easily on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size., but at the same time it can accommodate a large number of tools, and if necessary, quickly move it to any place or adjacent room. It is very convenient to use such a rack in your workshop or when conducting construction and repair work in large rooms, especially when you need to frequently move tools.

The rack can be assembled on the basis of a collapsible plastic rack mounted on a self-made platform with wheels (trolley). The platform is made exactly to the dimensions of the rack from metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

Additionally, it is possible to make and fix fasteners for building levels, extension cords and other tools that can be stored in a hanging position to the rack.

Help for the hostess

There is not always a financial opportunity to buy, for example, something from new furniture in a furniture store or place an order for its manufacture. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using improvised means for this.

Cork kitchen apron

A kitchen apron is a wall surface located between the countertop and wall cabinets. Usually this part of the wall is lined with tiles. But many other materials can be used to cover it, for example, wine corks can be glued to the wall.

Such an exclusive decor looks quite great.

Before sticking, each cork is cut lengthwise into two halves with a sharp clerical knife. It is desirable to paint the wall black, which will emphasize the seams between the plugs.

Corks are glued to the wall using liquid nails in a checkerboard pattern or with a certain pattern, since it is unlikely that they will be laid out perfectly evenly, and curved rows will visually look disgusting.

The corks themselves are not afraid of moisture, but they quickly get dirty and are poorly washed, so it is best to close them with a tempered glass screen. True, you will have to spend a little money on it and order glass in a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

Glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although an apron decorated with wine corks can be expensive, the result will be worth it.

The surface of the countertop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hinged folding table

A folding table fixed to the wall allows you to save some space in the apartment. In the folded state, it can protrude from the wall at a distance of no more than 10 cm and does not interfere with anyone at all, but when unfolded, it can replace a full-fledged table.

There are many options where you can use a folding table fixed to the wall. Here are just a few of the most basic ones:

Shower for giving

There is probably nothing better than refreshing yourself under running water on a hot summer day, especially if he was working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

The shower can be installed independently without outside help, the main thing is to choose a place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showers, which you can freely build on your own:

Installation of a simple shower is done in this way:

1. A shower cabin frame is being made, which can be assembled from metal, wooden beam or other improvised materials.
2. On the roof of the assembled frame, a metal or plastic container for water, which can be from 50 to 200 liters.
3. It is advisable to paint a metal container black for better heating of the water. Additionally, several heating elements can be installed in the container. electric heaters, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with a tarpaulin or cellophane film with folding canopies.

To build on your own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who deals with it wants to finish it as soon as possible with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on your own. For example, it can be wall SIP panels or such useful tool, like a vibrating plate, the need for which often arises among many owners of a personal plot.

Homemade SIP panels

For their manufacture, you need to prepare a flat, hard platform. After laying a sheet of OSB 10-12 mm thick on it with a rubber spatula with teeth, apply glue to it.

Then lay sheets of foam grade 25-30 on the glue. After that, an adhesive mass is applied on top of the laid foam, as well as on the bottom OSB plate, and the second sheet of OSB is laid on top.

If several stacked boards are being made at the same time, work should be done quickly until the adhesive has set. Usually in this way you can prepare no more than 4-5 panels at a time.

After harvesting, the formed slabs need to be pressurized with a press. Since at home, of course, hydraulic press no, it can be replaced with a thick plywood sheet laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use car, having driven onto a plywood sheet along a pre-made flyover.

After the glue has completely dried, the home-made panels are ready, they can be folded into a separate pile and proceed to the preparation of new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Vibrating plate manufacturing

To make a homemade vibrating plate, you will need to prepare:

1. An electric motor with an eccentric brand IV-98E, which is the main part of the vibrating plate.
2. Steel sheet, at least 8 mm thick, 450x800 mm in size. It can be ordered at any metal base.
3. Two pieces of channel no more than 400 mm long.
4. inch pipe for the handle and two rubber bushings for its fastening.
5. Of the tools you will need a welding machine, a grinder and a set of wrenches.

From the narrow sides of the plate, stepping back from the edges by 80-100 mm, make an incision with a grinder to a depth of about 5 mm. After that, bend the edges towards the notch at an angle of approximately 25 0 and weld them by welding. Bends are needed so that the vibrating plate does not sink into the material compacted by it and moves freely along its surface.

Then, across the plate at a certain distance, calculated for mounting the electric motor, two channels are welded with the shelves down. Through advance drilled holes in the channel, with the help of M10 bolts, an electric vibrator is attached to them.

The tube handle is attached to the vibrator via soft rubber grommets, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful things in the household with your own hands, spending on this only a part of the money that you would have to pay when buying a finished product. You just need to make some effort and have certain skills.

Someone will certainly take a look at this collection of ideas and say what is easier to buy new furniture or decor. But this article is not for them, but only for true connoisseurs of the unique style and handicrafts. Here you will find 10 of the most beautiful items interior, what you can do for your home with your own hands, without spending extra money.

The best crafts for the home with your own hands from improvised materials for 2018!

1. Decoupage and other do-it-yourself furniture repair ideas

Restoration of old chests of drawers and sideboards is perhaps one of the main trends of our time. Many pieces of furniture fail over time: tables and chairs become loose, cushioned furniture is pressed through and requires a new "stuffing". But chests of drawers and sideboards can stand for themselves long years and bother you with their outdated appearance.

Home needleworkers and decoupage masters have not only found a way to update the design of old furniture, but have also created a fashion for the use of vintage “grandmother's” chests of drawers in the interior. Detailed instructions on painting and decoupage you will find in our article .

Below are some photos of amazing home projects to inspire you.

Restoration of an old chest of drawers with replacement handles and hand painting:
Painting and finishing an old cabinet with metal buttons:
As a result, the furniture acquired an original Moroccan-style decor effect. Simple, like all ingenious:

By the way, in this way you can create more sophisticated things for the home:

Decoupage and painting amazingly transform old furniture facades, but not every person has enough time and patience for this painstaking task. Therefore, the best DIY home ideas also include refurbishing furniture with duct tape in marble, gold, and other unusual finishes. A minimum of effort - and the most ordinary piece of furniture will turn into the main decoration of your interior.

2. Beautiful things for the home with your own hands: carpets

Perhaps the most pleasant thing about creating things for the home with your own hands is when one of the guests asks: where did you get such beauty? A stylish rug with a zebra print (or other motif of your choice) will certainly deserve such a compliment. And not once.

The fabric can be any. The main thing is that it should not be too demanding in care: it is not afraid of moisture and is easy to clean. In this case, the master chose the vinyl fabric. It is heavy and strong enough to look like a true carpet. What's more, the quality of vinyl these days is very impressive, and it's available in a wide variety of colors and interesting textures.

All necessary materials and tools:

• Thick paper;
• Vinyl upholstery;
• Scissors;
• 2 Krylon pens or regular fabric paint.

Procedure:

1. Create a paper stencil. Draw and cut out the outline of the zebra skin, then the drawing itself on it. Do not worry about your artistic talent - the skin of a zebra and should not look uniform or symmetrical. In extreme cases, the pattern can be copied from a picture on the Internet or even printed out to cut out.
2. Attach the stencil to the vinyl fabric and outline the stripes with Krylon pens (spray or brush). After that, the stencil can be removed and continue to paint the areas inside the contours.
3. Let the paint dry and you're done! To be sure the pattern will hold, you can "seal" the carpet by spraying a clear coat of acrylic spray paint over it.

Krylon handles create a stunning gold leaf effect on the surface of the fabric. In addition, the paint in them dries quickly and is very securely held. If you can’t buy them in your city, then use regular fabric or wall paint. As the next hero of our article.

He took a cheap white rug as a basis and decided to give it an interesting look with his own hands using a chevron pattern. All he needed was thin duct tape, scissors, a thick brush, and two different shades of latex paint.

Finally, another inspiring example where a makeshift stamp is used instead of a stencil. The craftsman had a rubber bath mat, leftover wall paint (thinned a bit with water for a vintage effect), a roller, and an old IKEA wool rug. We look at the photo that he managed to cook from these ingredients.

3. Unusual "marble" DIY crafts (photo)

7. Turn photos into wall decor

This is much cooler than just hanging photos in frames! Your personal photos or any images you like from the internet can turn into beautiful wall art for any room. To make such a decor with your own hands, you can use any of the following methods.

1. Find or buy a substrate. A thick sheet of polystyrene foam or polystyrene foam (as in this case), a board and other improvised materials can act as it.
2. Print the photo, having previously edited its dimensions so that they are about 5 cm larger than the substrate. These "extra" centimeters will go to the folds.
3. Cut the photo and backing into pieces if you want a modular set rather than the whole picture. Otherwise, skip this item.
4. Overlay the photo on the substrate and wrap the ends. The author of this product used double-sided adhesive tape to secure the photos. You can mount with ordinary glue or other available means. The very surface of the photographs can also be treated with glue or gloss paste.

1. Print the image and prepare the canvas to which it will be transferred.
2. Pull the canvas over the frame and apply a thick layer of medium gel on it. These gels are widely available and today you can buy them in any store of finishing materials.
3. Place the photo on the oiled canvas and press down. Leave it like this for several hours, but periodically sprinkle with water from a spray bottle.
4. Carefully, use your fingertips to start erasing the back of the image from the canvas. Remove all paper in this way.

As a result, you will get a beautiful one with scuffs that will only give it a touch of vintage style. It remains only to apply the last layer of medium gel on it as a protective coating.

For inspiration, here are a couple more ways to decorate your interior with a photo.

We use an old window frame as a photo frame. How do you like the idea?

8. Creative homemade lampshades for lamps

Homemade lampshades made of fabric, paper, thread and other improvised means will not only decorate your home, but also bring an unusual atmosphere into it every dark time of the day.

Look for the best ideas for your taste in our article . The next photo shows a popular creative thread lampshade.

9. Succulents - do-it-yourself living home decor

A succulent living wall is perhaps the most amazing DIY craft you can make for your home. Agree: if you saw it in someone's design of a living room or another room, you would not be able to remain indifferent!

Dekorin will tell you how to get such an impressive and sustainable decor:

1. You will need a shallow wooden container for planting and a metal mesh.
2. To fix the mesh on the container, use an impromptu wooden frame, which can be made from small boards or chips. Attach to staples or nails.
3. Prepare any for composition. They easily take root in the most difficult conditions and look best when you combine different shades and shapes of leaves. Common examples of succulents: aloe, various cacti, young or stone rose (Sempervivum), stonecrop (Sedum), mountain grate (Orostachys), etc.
4. Fill the container with soil and plant your chosen plants in it. Use any cactus mix for drainage.

Here are examples of crafts for the home that you can do with your own hands using the above method.

10. Crafts for the house with your own hands from glass containers

Glass bottles and jars often accumulate on balconies and in pantries. What they are not turned into today: lamps, candlesticks, vases, table decor ... It's amazing how easily they become part of stylish interior, one has only to apply a little ingenuity, as well as paints, fabrics, threads, paper and other improvised means. Last batch of photos for today. Also read:

10 best ideas what you can do at home with your own hands updated: March 21, 2018 by: Margarita Glushko

Many electrical appliances can be repaired or made new with your own hands. For this house, there is always something that can be redone to perform new functions: old Digital Watch, baby car, disused computer and much more. Useful crafts can always be repaired or redone. For work it is better to have a workshop with tools.

Equipped home craftsman's workshop

Power Supply

Homemade electronic devices need power different voltage. In particular, an adjustable power supply is needed for soldering. Such an opportunity can be provided by the LM-317 microcircuit, which is a voltage stabilizer.

Diagram of an adjustable power supply

Devices based on this circuit allow you to change the output voltage in the range of 1.2-30 V, using a variable resistor P1. The allowable current is 1.5 A, the power of the device depends on the choice of transformer.

Adjustment of the voltmeter is performed by a trimming resistor P2. To do this, set the current to 1 mA at an output voltage of the circuit of 30 V.

The more power is allocated on the microcircuit, the greater the difference between the input and output signals. To reduce heat, it requires a heatsink with a cooler.

A homemade board with an LM-317 chip is placed in a case - a computer power supply. A voltmeter and clamps to the output wires are installed on the front panel made of textolite.

Simple autoprobe

A probe for cars and other purposes should always be at hand at home, in the garage or on the road. The figure below shows a homemade scheme that allows you to check electrical circuits with a resistance of up to 10 kOhm and the presence of a voltage of 6-15 V.

The two indication circuits are connected in series to the battery and in parallel to each other. The first one consists of a resistor R1 and an LED HL1, which lights up when checking the voltage. At the same time, the battery is being charged.

Scheme and design: a) a homemade circuit that allows you to check electrical circuits with a resistance of up to 10 kOhm and the presence of a voltage of 6-15 V; b) homemade design autoprobe

When the circuit is being tested, current flows from the battery through circuit HL2, R2. At the same time, the HL2 LED lights up. Its brightness will be greater, the lower the resistance of the circuit.

Like all homemade products, a structural probe can be made different ways, for example, put it in a transparent plastic case, which is easy to glue with your own hands.

Such devices are indispensable when repairing an electrical network or a household appliance at home. Crafts can be more complex and have additional features.

Electric appliances for heat treatment of meat products without the use of fuel are made for a small number of servings and can be used at home or in the country. To cook a shish kebab, with the help of an electric barbecue, there is no need to spend expensive hours of rest, standing on the street at the barbecue.

In specialized stores, you can choose any device, but the price decides a lot. If you have the skills to handle electricity, it will be much cheaper to make an electric barbecue with your own hands.

Designs are made in horizontal or vertical design. The power of the device usually does not exceed 1.5 kW. The meat is heated using a tungsten or nichrome thread. All metal parts are made of stainless steel.

Typical devices are vertical heaters in the center and skewers with the product around. They are attached to the top. It is advisable to make skewers in the form of spirals, from which the meat does not slip down during cooking.

Type of vertical electric grill

For high-quality cooking of a shish kebab with your own hands, skewers should be placed as close as possible to the heater, but so that the product does not touch the spiral. When placed at a distance, the meat will not fry, but will dry.

Pieces of the product, no larger than 40 mm in size, are mounted on a skewer, which is placed vertically around the heater. Then the electricity is turned on and the coil is heated.

The basis of the heater is a heat-resistant ceramic tube, on which a spiral is wound. Mounting at the bottom is done using a special cartridge.

In the round base, special cups are attached to collect fat and a frame that serves to hold the skewers vertically.

Cups are made from stainless steel. From below, they have cruciform protrusions, which are inserted into the slots of the base. Inside they have mounted devices for attaching skewers. Fixing the cup on both sides allows them to hold the skewers vertically.

The connection must be strong and at the same time easy to disassemble for cleaning. You can make a common removable tray for all skewers.

The cross section of the supply wire is selected according to the power of the heater (2.5 or 4 mm 2). At home or in the country, there should be a 16 A socket for it.

timer for watering plants

Timers are used for drip irrigation area from the tank at a certain time. They can be connected to valves with any capacity.

Often branded devices do not provide the required reliability. Then the old ones come to the rescue Wall Clock, which are serviceable, but are no longer used at home. Small magnets are attached to the ends of the minute and hour hands, and 3 reed switches on the dial.

Timer scheme for watering plants, in which a wall clock is applied

As soon as the hour hand reaches the number 7, and the minute hand reaches 12, which corresponds to the time of 7 hours, the reed switches SA1 and SA3 are triggered and the signal opens the solenoid valve. After 2 hours, the hands will move to 9 and 12, and the current through the contacts of the reed switches SA1 and SA2 will be supplied to close the valve.

The diagram shows a "rain sensor", which in wet weather closes the transistor VT1 and the valve remains permanently closed. Manual control of the solenoid valve is also provided through the buttons S1 and S2.

The clock can be set to any time the valve is turned on.

Car with remote control

Homemade radio-controlled models capture not only children, but also adults. They can be used to play at home or arrange real competitions in the yard. To assemble with your own hands, you will need a chassis with wheels, an electric motor and a body.

There is a large assortment on sale, but first of all, you need to decide which machine is best to make. The control panel can be wired or radio controlled.

When choosing parts, you should pay attention to their quality. There should be no notches, inclusions and other mechanical defects on the plastic. The wheels are sold with the chassis and should turn easily. Grip with the surface is better provided by rubber. Plastic wheels in this regard are much worse.

It is better for a beginner to take an electric motor, which is cheaper and easier to maintain than an internal combustion engine. You can choose any case or make according to your sketch.

The motor, battery and radio unit with antenna are mounted on the chassis of a mini-car. If a kit with accessories is purchased, assembly instructions are included with it.

After installing the parts, the operation of the motor is regulated. The body on the chassis is installed after everything works.

You can assemble mini-copies at home as follows:

• the car is assembled carefully and by common efforts;
• materials of parts of the model may differ from the original;
• small and insignificant details can be omitted.

The model can be made without looping on a certain brand of car. Much depends on finances and the availability of free time. Assembling a mini-car at home with a child is of great educational value.

Work on assembling the car model is carried out according to plan. Some parts need to be bought, but old toys can be used.

The motor must match the weight of the device in terms of power. Fresh batteries or accumulators are used for power.

If you use a special autoconstructor, crafts can be very diverse. Assembly sequence:

• the frame is assembled first;
• the motor is mounted and adjusted;
• a power supply is installed;
• an antenna with a radio unit is fixed;
• wheels are installed and adjusted.

Types of radio-controlled car models

Many homemade tricks are revealed in this video.

Electronic homemade products can make life more comfortable and save a lot of money. In addition, you can find a use for old electrical appliances so that they do not gather dust in the pantry without a purpose. Useful do-it-yourself crafts often turn out to be better products factory production.

Since you have decided to become a self-taught electrician, then for sure after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example,. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use a tool for radio amateurs.

As for the first point, before proceeding with the manufacture electronic homemade products with your own hands, you need to learn how to read wiring diagrams. In this case, ours will be a good helper.

Of the tools for beginner electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need welding machine, but this is a rare case. By the way, in this section of the site we even talked about the same welding machine.

Special attention should be paid to improvised materials, from which every novice electrician will be able to make elementary electronic homemade products with his own hands. Most often, in the manufacture of simple and useful electrical appliances, old domestic parts are used: transformers, amplifiers, wires, etc. In most cases, it is enough for beginner radio amateurs and electricians to look for all the necessary tools in a garage or a barn in the country.

When everything is ready - the tools are assembled, spare parts are found and minimal knowledge is obtained, you can proceed to the assembly of amateur electronic homemade products at home. This is where our little guide will help you. Each instruction provided includes not only detailed description each of the stages of creating electrical appliances, but also accompanied by photo examples, diagrams, as well as video tutorials that clearly show the entire manufacturing process. If you do not understand some point, you can clarify it under the entry in the comments. Our experts will try to advise you in a timely manner!

Everyone is used to treating their home as a fortress, a cozy place where you can escape from the hustle and bustle. It is doubly pleasant when your own home is inhabited, everything in it is done at the request of the owner and the necessary things are at hand. It is pleasant to return to such a house after a working day or a long vacation, the atmosphere in it is soothing and bewitching.

In contact with

You can decorate your own home with your own hands. Homemade for the household - It is not simple interesting idea for author's design, such things are gaining popularity in the world and even the most famous designers are hunting for masters "" who are able to make a real work of art. In addition, such lovely organizers seriously facilitate cleaning, help organize materials for hobbies, books, knick-knacks and jewelry. There are a lot of options for crafts for the home with your own hands, each author brings something of his own to the project, but in the end you always get something warm, homely and cozy.

Options for craft organizers for the home

There are several variations of various crafts made of metal, clay and plastic, but they are all aimed at a single goal - to make a person's life in the house easier and more comfortable. So all do-it-yourself crafts for the home can be conditionally classified into:

Ultimately you can make a craft just like that without bothering to find her useful application. In the end, making useful things for the home with your own hands from wood, metal, or plastic is just a hobby, which, however, can become the main business.

As for where to get materials and tools, fortunately, the modern market infrastructure allows you to find absolutely everything for needlework or carpentry in the nearest store.

Stool box for tools

Among homemade products for the home that you can do with your own hands, toolbox- this is perhaps the first thing a home master should do. Such a stool is extremely functional and easy to create, the cost of consumables is incomparable with the market price of a good chair, and due to the extremely primitive design, the bench will last quite a long time. All that is needed to make such a homemade product for the home is:

• screws, 20-26 pieces;
• sled, 4 pieces;
• a block of wood, 17 pieces;
• wooden panel, 9 pieces;
• screwdriver, hammer, varnish, brush.

A tree for such a homemade product should be chosen easy to work with, that is pine or beech. Hardwoods are highly undesirable, for example, oak, which is incredibly difficult to work with at home, not to mention the fact that doing a complete do-it-yourself processing is a time-consuming task.

From the bars you need to make four U-shaped blanks, one larger than the other. This is the basis of the bench and steps on the sled. Then you need to strengthen the legs with an additional bar. For a step, fix a slide on it on both sides. Make a niche in the form of a small box under the seat of the stool, then screw the side panels. Varnish the finished homemade product.

Cooler bag

Such a homemade product will come in handy on any trip.. It is unprofitable to buy it, since the cost of even the simplest one is higher than the price of consumables. And in order to make a bag yourself, you only need a few simple elements:

• a roll of insulation;
• old bag;
• tape and scissors.

Of the insulation options, it is recommended to choose foam polyethylene, widely applicable in household purposes. Enough 1-2 meters of this material. From the insulation you need to make a cross with a central part, and then pack it in an old bag. It is better to cut off the “lid” of the homemade product and attach it to the adhesive tape, fill the side joints with the remnants of insulation or foam rubber. You can make such a homemade product yourself in 20 minutes, no more, and in terms of efficiency it is in no way inferior to store-bought counterparts, since the insulation is excellent insulating material.

House-scratching post for a cat

House-scratching post made of wood- this is the most productive way to keep all the other items in the house intact by giving your pet a new toy to tear to pieces. Making it is quite simple, as there are many variations of the project. For the entry level, one house with a cylindrical scratching post is enough. This will require:

• wooden panel, 5 pieces;
• cylindrical bar, 1 piece;
• wooden rail, 12 pieces.

The simplest house with a square roof, but you can do a more complex project for your pet - with sloping top or several levels.

Before work wooden elements should be covered with carpet, it is better to do it with self-tapping screws, but making sure that their tips do not look out and do not damage the pet's paws. One of the panels will act as a base, the “foundation” of the house is mounted on it - 4 rails, a panel is fixed to each of the rails, then another level of rails should be added from above and the structure should be covered with a roof. Installation takes place on the corners or screws. An entrance must be drilled or cut into the front panel. Fasten the cylinder near the entrance, and then wind the string around the special glue.

Options useful crafts lots of, most options are copyrighted and invented literally out of necessity, that is, to solve a specific problem. In order to come up with something of your own, it is enough to overcome laziness and pay attention to those problems that prevent you from living in your own home, and then solve them on your own, because it is very pleasant.

home » Decking » DIY homemade from improvised means. What homemade products for the household can be done with your own hands