How to remove brown spots in an acrylic bath. How to clean an acrylic bathtub

Cast iron baths are gradually being replaced by acrylic products. The latter are much lighter than metal, have a variety of shapes. Polymer containers are easier to manufacture, less material-intensive. The cost is comparable to traditional plumbing and tends to be cheaper.

But, unlike the enamel coating of a cast-iron bath, acrylic has other technical specifications. This affects the care and methods - how to wash acrylic bath at home.

Acrylic is a mixture of copolymers of acrylic and methacrylic acids embedded in the structure synthetic fabric. Another, less well-known name is Plexiglas.

Properties:

• Thermoplasticity - softens when heated above 90~100°C.
• Plastic under normal conditions, easy to bend.
• The density of acrylic (1180~1190 kg/m³) is half that of ordinary window glass.
• Small thermal conductivity, within 0.2~0.3Vt/(m*K).
• More impact resistant than cast iron, the latter has increased brittleness.
• Low mechanical strength and surface hardness (no more than 180 ~ 190 N / mm²), - scratches are easily applied.

Advantages of acrylic bathtubs

The properties of the polymer affected the consumer qualities of the wash tank:

1. The full-size product is light in weight (up to 40~50 kg) compared to a cast iron bath.
2. Inner surface:

• smooth, dense without pores and caverns;
• has gloss;
• high resistance to ultraviolet;
• warm to the touch;
• the walls of the bath dampen the sound.

1. Acrylic racks:

• to the effects of water;
• does not react with most organic and inorganic solvents;
• neutral to various detergent compositions;
• dielectric;
• not affected by biological factors - mold, fungus, does not rot;
• easily processed, polished.

Material Properties acrylic bath allowed us to develop a number of methods for the care and cleaning of the product.

Cleaning

The origin of pollution occurs for various reasons:

• the formation of a dirty red coating due to smudges from the tap (acrylic itself does not contain iron and does not rust);
• deposition of salt and limestone formations due to water hardness;
• commonplace clay-sand mud from washing dirty shoes, pets after a walk, cleaning entrance mats;
• oil, grease stains remaining during the repair of plumbing or from dirty hands;
• surface staining with industrial or low-quality clothing dyes;
• darkening of the surface due to the use of aggressive chemicals;
• deposits of residues of plaster, putty mortars or paint;
• sedimentation of dirt in microcracks formed as a result of careless handling of the plumbing fixture.

Depending on the type of contamination, you can clean the acrylic bath using simple methods or using special liquid compositions.

Washing

The simplest and affordable way for cleansing and prevention:

• an acrylic bath is rinsed with warm water to soak old and dried dirt stains;
• a soft (!) sponge is applied with a layer of soap or an acrylic bath cleaner;
• after 10~20 minutes, the surface is wiped and rinsed with a stream of water.

The method allows you to remove all surface layers. Instead of soap, you can use household chemicals - liquid solutions of detergents for dishes, plastic (windows, doors), floors.

IMPORTANT! A non-abrasive sponge or soft cloth must be used. Keep the hard side of the sponge inside your hands.

ADVICE. Mud from sand, clay, Decoration Materials should be soaked for 30~40 minutes. Next, rinse with strong water pressure from the shower hose. Remove residues with a sponge, without applying excessive force. This will prevent the formation of scratches on the surface of the acrylic bath.

Application of chemistry

The use of a special detergent with an alkaline or acid indicator is justified for cleaning the acrylic bath from limescale or rust smudges:

1. Cleansing gel. Supplied in plastic packaging. The label must indicate the purpose of the liquid product.
2. Citric acid is one of the folk remedies that can be used to wash acrylic products. Dilute the powder according to the manufacturer's prescription. Apply the solution with a rag to the place of contamination. Leave for about 5~10 minutes (the result is visible visually), wash off with soapy water and clean water. An option is to use lemon juice (this is a more gentle method).
3. Vinegar. A table variety should be used, but not a concentrated acid (essence). The surface is moistened for 5~10 minutes. Next, wipe with a soapy sponge and rinse with clean water.
4. Baking soda. I use the product in the form of gruel, exposure 15 ~ 20 minutes. Surface flush with clean water.
5. Perhydrol (hydrogen peroxide). Chemical activity is based on the release of atomic oxygen interacting with rust components.
6. Alcohol. It is better to use (if possible) the medical option. Dissolves oils and fats of organic origin (sweating or from food).

IMPORTANT! Can it be washed with whiteness? - a question from the owners. Categorically - it is impossible! It contains , which reacts with chemical elements acrylic. The result is a darkening of the surface, loss of properties.

ADVICE. It is incomparably easier to wash an acrylic bathtub immediately after use than to remove dirt afterwards.

Prevention

Care of acrylic products should be periodic, including preventive measures:

1. To avoid the formation of smudges of rust or lime-salt deposits will help a closed tap and the serviceability of the water supply system.
2. Scratches are a prerequisite for surface contamination. Simple rules will help to exclude education:

• you can wash acrylic bathtubs only with products with a soft structure, without the inclusion of abrasive substances and hard elements;
• use plastic buckets, basins;
• lay a rubber (polyurethane, plastic) mat when washing pets - this will avoid damaging the acrylic with claws;
• put stools with metal legs in the bath;
• the polishing operation will help restore the smoothness of the surface (GOI paste, liquid furniture products);
• when cleaning acrylic products, substances that can damage the quality characteristics of the bath should not be used.

1. Soak heavily soiled items, especially with the presence of industrial oils, in a separate container. After washing and rinsing, it is necessary to rinse the bath itself. A similar surface refreshing procedure should be performed when resetting waste water from the washing machine.
2. Give up the habit of washing shoes in the bath - dirt is an abrasive. Under the pressure of water, the suspension leaves scratches over time - it works as a hydro-grinding substrate.
3. Clean contaminated painting tools in a separate bucket. Remove liquid through the toilet.

The rhetorical problem - how to clean an acrylic bath, must be solved based on the type of pollution, the timing of formation. It is important to choose the right cleaning agent and method of application. Even better, do not postpone the process for a long time, clean up the dirt immediately after using the bath.

Acrylic bathtubs are increasingly being chosen by consumers to replace worn-out steel and heavy cast iron bathtubs. Indeed, such plumbing fixtures are characterized by a very attractive, neat design. appearance, they are distinguished by their low weight and exceptional whiteness. In addition, they are presented in a very wide variety of shapes and sizes.

In addition, acrylic products have a number of other advantages, one of which is complete inertness to corrosion. However, this does not relieve the owners of the obligation to regularly clean surfaces. And in general - care for an acrylic bath at home should be systematic - only in this case it will retain its original novelty for long years. By the way, similar rules should be followed by those homeowners who have updated old steel or cast iron bathtubs acrylic tabs.

Properties of acrylic bathtub surface

In the production of acrylic sanitary ware accessories, a special polymer is used, which is characterized by sufficient hardness and wear resistance. But it is impossible to consider it devoid of shortcomings.

Since the "pros" and "cons" of acrylic products directly affect both the rules for their operation and recommendations for regular care, it makes sense to list them briefly.

First - about virtues :

• Such baths retain the heat of the water collected in them much better and longer. For this reason, it is more comfortable to take procedures in them.
• The vulnerable point of cast iron and steel bathtubs is always the enamel layer. In the case of even a small cleavage, a corrosion center is formed. With acrylics, there is no such danger.
• Acrylic bathtubs have dirt-repellent properties. This prevents the formation of a favorable environment for the development of microflora in the pores of the material, which is especially important under conditions of constant humidity and elevated temperature.
• In continuation of the previous paragraph - the surface of the acrylic bathtub is easily cleaned of dirty deposits (unless, of course, it is not running at all) .
• The lightness of the products greatly simplifies both transportation and installation.
• Finally, the manufacturing technology of such bathtubs allows the production of products of various designs - in shape, size, color, equipment. That is, the proposed choice of models is incomparably wider than steel or cast iron.

But limitations There are also, and - very significant:

• The material is resistant to high temperatures. It is clear that the critical threshold of 160 ℃, which causes acrylic to melt, is impossible even theoretically in a bathroom, but even very hot water, combined with mechanical stress, sometimes leads to deformations. Especially if the bath is from the category of inexpensive, thin-walled ones.
• The strength qualities of many acrylic products cannot be called outstanding. Often you can clearly feel the deflection of the bottom of the bath under your feet, which already causes a certain psychological discomfort. In addition, along with such plasticity, fragility is also noted - the instability of the walls to accentuated mechanical loads - shocks. Often this ends with the formation of a crack.
• Acrylic is still quite sensitive to household chemicals. That is, it is unacceptable to use recklessly any detergents and cleaning products, since you can hopelessly ruin the bath.

The disadvantages include the rather high cost of acrylic bathtubs. And also the fact that the market is flooded with low-quality, handicraft products, which, however, with the “naked eye” are difficult to distinguish from those worthy of attention. But such a bath will definitely not serve for a long time.

Basic rules for the care of acrylic surfaces

Owners who are familiar with caring for them will confirm that keeping them in proper condition is quite easy, although this will take some time. Enough after each dose water procedures Wipe the inside of the bathtub with a soft cloth soaked in warm water, and then it is advisable to wipe and dry. In this case, the best solution can be considered to reduce to a possible minimum the use of chemicals for cleaning acrylic. The complexity of maintaining accessories made of this material lies only in the fact that sometimes there is not enough time and effort for daily cleaning.

• It has already been noted that acrylic surfaces are not sufficiently resistant to mechanical stress. And, by the way, most often scratches on bathtubs appear precisely in the process of cleaning them. Therefore, sponges with an abrasive surface should be categorically excluded from use. Only soft sponges or cloths are suitable for cleaning.
• Modern models of acrylic bathtubs are more durable than those that appeared at the dawn of the spread of this technology. However, some care must be taken when using them. Acrylic chips can appear as a result of various metal or sharp objects, glass, porcelain or earthenware falling into the bathtub, so you can not store this on shelves located above the bathtub.

• You should know that there are two types of acrylic products made according to different technologies- these are cast and reinforced bathtubs. Their surface care is the same, but they differ in mechanical resistance.

Reinforced products consist of several layers, the middle of which is fiberglass with the addition of epoxy resins. Reinforcement makes the container more durable, but at the same time increases the risk of chipping. When heavy objects fall on such a surface, part of the outer acrylic layer may peel off and break off.

Cersanit acrylic bath prices

Cersanit acrylic bathtub

Cast containers are more susceptible to damage in the form of scratches. But sometimes, especially if the frame is not properly installed under the bath, it can simply split.

• It is not recommended to soak laundry in an acrylic container. The fact is that prolonged exposure of this material to an aqueous solution of powder, as well as contaminants separating from the fabric, negatively affects the surface of the material. The bath will quickly lose its whiteness and smoothness of the walls.

• If it is fashionable to clean sanitary ware with most of the usual detergents, then special compositions should be chosen for acrylic. In the same case, when it is not possible to purchase them constantly, you can use home remedies with a mild cleaning effect. When choosing a ready-made composition for washing an acrylic surface, you should carefully study its packaging, which indicates the ingredients, as well as its purpose.
• If it is decided to use ready-made chemical compositions, it should be remembered that it is recommended to use them no more than once every 10-14 days. Otherwise, the surface will lose its smoothness and whiteness. In the period between “general” cleanings, it is necessary to use only a damp sponge or napkin.
• It is impossible to use ordinary powder, liquid or pasty detergent compositions with abrasive inclusions for washing polymer plumbing. They are able not only to leave scratches on the surface, but also to make it completely matte. And this will lead to the fact that the mud particles will linger on the walls of the bath. Getting rid of such a stubborn plaque is already much more difficult.
• It is unacceptable to clean bathtubs made of acrylic with products containing oxalic acid, alcohol-containing solvents, and acetone. These substances can not only destroy the gloss, but also deform the polymer product. Cleaning agents containing chlorine can also damage the surface of the material.
• It is impossible to bathe pets in acrylic or acrylic-coated bathtubs, as they can scratch the surface of various depths with their claws. If it is necessary to carry out such measures, the bottom, as well as the walls of the container, should be secured by covering them, for example, with old towels.
• Do not clean dishes in the bath, as well as objects made of any material that have sharp corners that can damage the surface.
• The bath will lose its original aesthetic appearance if it is filled with boiling water or water heated to a temperature exceeding 65 degrees. Under the influence of high temperature, acrylic will not only lose its smoothness, but may also deform.
• It is unacceptable to clean the inner surface with hard brushes.

All of the above precautions are necessary to keep the tub in its original white and smooth condition. Therefore, when purchasing an acrylic product or producing it, it is necessary to take into account all the indicated points.

What compositions can be used for acrylic plumbing?

It should be told in more detail about ready-made detergents suitable for cleaning polymer baths - what you need to pay attention to when choosing them.

• The packaging of specialized compounds should indicate that they are safe for sanitary accessories made of acrylic.
• In addition to specially designed acrylic cleaning compounds, some universal solutions are also suitable, but they should not contain aggressive ingredients, such as certain types of acids, acetone, alcohol and ammonia.

The disadvantage of ready-made detergents for acrylic products is their high price, as well as the fact that their use must be strictly dosed. It should be noted that domestic cleaning solutions have more affordable price, although they often have an effect completely similar to imported formulations.

Ready-to-use proprietary acrylic care products

The advantage of ready-made chemical-based cleaners is that they not only remove dirt, limescale, rust and yellowness from acrylic, but also create a protective, visually imperceptible film on its surface.

So, among all the existing compositions for cleaning acrylic, the following compositions can be distinguished, which have earned positive user reviews:

Illustration	Name and brief characteristics detergent
	"Acrilan" - this composition is a cleaning foam designed to eliminate contaminants such as limescale, soap streaks and rust. The tool is easy to handle different types spots. After washing off the foam, a protective film remains on the surface of the acrylic, which prevents the accumulation of dirt in the pores of the material. For the composition to be effective, it should be used in accordance with the instructions supplied by the manufacturer. It is very important not to leave the foam applied on the surface until completely dry. In addition, it is unacceptable to mix "Acrilan" with other detergents.
	"DEC" - this product is produced in the form of a cream and is intended for cleaning not only acrylic sanitary ware, but also tiles, chrome and other surfaces. The composition includes antiseptic additives that prevent the growth of harmful bacteria and fungal growths in hard-to-reach places of plumbing accessories. Along the way, when rinsing, the product perfectly cleans sewer system. It has a beneficial effect on the metal parts of hydromassage bath models.
	"Triton" is a fairly popular product for cleaning acrylic bathtubs, which can be sold as a concentrate or a ready-to-use solution. The concentrate is sold in large containers and is intended for the active fight against serious pollution and for large-scale sanitization from the spread of bacteria. The solution is usually packaged in a spray bottle, used to remove limescale and grease stains, as well as disinfect the bathtub.
	"Mr. Chister" - is used not only to tidy up acrylic bathtubs, but also metal plumbing accessories. The product perfectly copes with rust, limescale, grease stains and soap stains, while being gentle on surfaces and not causing them mechanical damage. The composition of "Chister" includes a polymer additive that creates a film on the surfaces that prevents the formation of dirt deposits. Antiseptic additives protect bathtubs or sinks from the growth of bacteria and fungal colonies. The tool works quickly, so you do not have to wait a long time for its effect on the material being cleaned.
	"Cif" - this tool familiar to all Russians has several lines, some of them are also suitable for cleaning acrylic accessories. Cif is produced in the form of a cream and spray, which are used mainly for preventive measures. Thanks to this composition, acrylic more effectively resists adhesion and penetration of mud deposits into the pores of the material. However, with strong pollution, limy deposits and a mold of "Cif" does not cope.
	"Meine Liebe" goes on sale in the form of a spray. Shows high efficiency in the fight against rust spots, mold and limescale, and also removes unpleasant odors. The product has a fruity aroma, and it contains citric acid, which is the main active ingredient. "Meine Liebe" creates a protective film on the surfaces, thanks to which the bath will remain clean for much longer. The spray is quite economical, so one bottle lasts for a long time, and it is also environmentally friendly, as it does not contain toxic ingredients.
	"UNICUM" is produced in the form of a spray designed to clean acrylic from mold, lime and rust. Thanks to the release form, the agent can be applied to the most contaminated areas of the bath. After 15 ÷ 20 seconds, the spray is rubbed with a soft cloth, and then washed off with warm water, along with which the impurities are also removed. "UNICUM" takes care of the cleaned materials, while producing high-quality cleaning with low consumption of detergent. After washing off the cleaning composition, a protective film remains on the acrylic.
	"Sanfor Acrylight" - this composition is intended for major cleaning, disinfection, as well as updating acrylic bathtubs and shower trays. In addition, the product effectively cleans the whirlpool systems. With the help of "Acrylight" even the most chronic pollution, limestone and soap deposits are removed. At the same time, the composition works effectively, creating a protective film on the surfaces, extending the service life of accessories, facilitating their care, and also giving gloss for a long time.
	"Cinderella" is an effective acrylic cleaner that can become ideal option for those who have not yet decided which of the compositions to choose. It perfectly copes with all the pollution that occurs on acrylic. However, "Cinderella" has one significant drawback - it is a pungent odor that appears during cleaning. Therefore, for work, it is recommended to wear protective gloves on your hands, and to protect the respiratory tract with a mask. The applied product is left for seven to ten minutes, and then washed off with warm running water, after which the surface is wiped with a soft cloth.

We should never forget that chemicals can become both a reliable assistant in removing contaminants, and a "pest" that will completely ruin the acrylic surface. Therefore, they should be used no more than once or twice a month. For more frequent cleaning of acrylic products, less aggressive compounds should be used.

If one of the chemicals is chosen for cleaning the bath, then before applying it to the entire area of ​​\u200b\u200bthe container, it is recommended to use it on a small, not too noticeable area of ​​\u200b\u200bthe surface. If acrylic does not show a negative reaction, then you can proceed to "full-scale events."

Available means for cleaning acrylic

Not so aggressive substances that can be found in any kitchen or in home first aid kit. They have a softer effect on acrylic, and at the same time, they do a pretty good job with most contaminants.

These products include citric acid, baking soda, vinegar, laundry soap, hydrogen peroxide, potassium permanganate. They can be applied once to twice a week without affecting the material.

• Citric acid must be dissolved in warm water, after which the solution is applied to the contaminated areas of the bath. For the manufacture of this composition will require 250 ml of water and 100 grams of crystalline acid.
• Baking soda (2 ÷ 3 tablespoons) must be poured with 500 ml of hot water, which will extinguish and dissolve it. After the reaction is completed, 500 ml must be added to the solution. cold water. The warm composition is applied to the walls and bottom of the bath for 10-15 minutes. After that, the container is rinsed with warm water.
• Laundry soap (15 g) must be grated on a coarse grater, pour 500 ml of hot water and, stirring, achieve complete dissolution. Then one tablespoon of soda is added to the soap solution. The resulting mixture is applied to the walls of the bath and left for about half an hour. After that, rinse with warm water, while wiping with a clean cloth.

If we talk about pollution of a certain nature, then the following recipes are used to remove them:

• A layer of lime scale that is not too thick can be removed with citric acid or concentrated lemon juice. To do this, the bath must be filled hot water, the temperature of which should not exceed 60 degrees. Then 100÷150 g of citric acid is poured there and mixed well. You can pre-make a saturated solution of acid, which will disperse faster in a large volume of the bath. Drain the water into the sewer after two to three hours after filling the bath, after which it must be rinsed with warm running water.

• If limescale has already formed a rather thick layer due to an oversight, then you can try to cope with it by treating it with soda and then with vinegar. To do this, the surface is applied soda solution(1000 ml of water and 100 g of soda), on top of it is an acetic composition (water and 9% vinegar, taken in a 1: 1 ratio). A reaction should occur between soda and vinegar, which lasts about 5 ÷ 7 minutes. Upon completion, the surfaces are washed with water. If necessary, this cleaning process should be repeated.
• Yellow spots and rust that has not eaten into the pores of the polymer must be treated with soda or hydrogen peroxide. The compositions are applied and left for 15–20 minutes, and then washed off with warm water.
• Not very deeply ingrained stains, mainly appearing on the sealant around the perimeter of the bath, can be removed with hydrogen peroxide.
• Rust most often appears on the surface of bathtubs due to a leaking faucet. If the stain is ingrained, and none of the ready-made or improvised compositions no longer acts on it, then it should be carefully rubbed with fine-grained sandpaper. After that, the cleaned place must be treated with a special compound - polish for acrylic. It is necessary to act very carefully, otherwise you can only worsen the situation.

Daily bathroom care

As mentioned above, in order to avoid lengthy procedures for cleaning complex stubborn stains and streaks, it is advisable to at least lightly wash the bathtub after each water treatment. Such a process will not take much time, as it consists of very simple manipulations:

• The sponge is lathered with any soap, and to speed up the procedure, it is better to use liquid types of soap.
• Then all the surfaces of the bath are rubbed with this sponge.
• After that, the container is rinsed abundantly with warm water.
• The final obligatory action is to dry the bathtub with a cloth that absorbs moisture well.

Such actions will prevent the appearance of stains and plaque, and, most likely, completely eliminate the need to use chemical detergents. Thanks to this, the bath will last much longer without losing its original fresh look.

Find out and check out ready-made formulations And folk remedies, from our new article on our portal.

Features of the care of the bath with hydromassage

Daily cleaning of a bathtub equipped with a hydromassage is carried out in much the same way as a regular acrylic tank. However, with a certain regularity (once a week or once a month, depending on the frequency of use of the bath), it is necessary to carry out a more extensive cleaning, including several specific operations.

• The bathtub is filled with warm water so that it covers all hydromassage nozzles.
• Then concentrated lemon juice (100 g) or a solution of citric acid prepared from 100 g of crystals dissolved in 200 ml of warm water is poured into the water.
• The bath is left with water for 2÷3 hours, after which the water is drained.
• From the bottom of the bathtub, the rest of the solution is collected with a sponge, and its walls are again wiped with it.
• Next, cotton swabs are taken - they will be required to clean the holes of the nozzles of the hydromassage system. The stick is moistened with hydrogen peroxide and penetrated as far as possible into the holes, thus cleaning them from limescale.
• The final step is rinsing the entire bath with warm water and wiping it dry with a soft cloth.

This process will not only clean the acrylic surfaces, keep the walls looking fresh, and metal parts, but will also help ensure long-term efficient work hydromassage system.

In order to prevent contamination of the hydromassage tubes, it is recommended to carry out preventive measures, consisting of the following actions:

• Before taking a bath, it is filled with water, and the hydromassage system is turned on for 5÷7 minutes, even if it was not planned to be used. In this way, stagnation of water in the internal channels, which often results in lime deposits, can be prevented.
• Once a month, a more intensive cleaning procedure should be carried out. To do this, the bathtub is filled with water, to which a special cleaning agent is added, and in this switched on state it is left for 10÷20 minutes. After that, the water is drained, the bath is rinsed and wiped dry.

How to get rid of minor scratches and other damage?

Even with the most careful use of acrylic sanitary ware, it is often impossible to avoid scratches on their surface. Lime and rust deposits can accumulate in such damage, which immediately visually distinguish these areas from the general background. To get rid of scratches, you can use one of the existing methods for removing them.

• Light scratches can be removed in the same way as single rust stains by treating the surface with fine-grained (P240÷P280) sandpaper. After that, the leveled area is polished with a polish specially designed for acrylic.

• Sometimes it is quite enough to apply only polish to scratches, without the use of a preliminary abrasive effect. The polishing paste is applied and intensively rubbed into the surface with a piece of felt in a circular motion. The process is continued until the scratches and the applied composition are maximally smoothed.

• When deep damage a repair kit for acrylic plumbing accessories will help. It is recommended to purchase it together with the bathroom in order to immediately select the closest shade of color - it will be much more difficult to do this later. The kit includes a paste-like acrylic compound that hardens when applied to the bathtub surfaces. The paste is filled into scratches and rubbed in a circular motion with the help of felt until it becomes smooth.

• Acrylic paste can even be used to repair through holes in a cast bathtub model that may also be formed for one reason or another. To perform this procedure, the area to be repaired must first be cleaned. Further, several layers of high-quality waterproof adhesive tape are glued on the outside of the bath, which will become a barrier for the paste. Then the resulting hole is filled with liquid acrylic and leveled with a plastic spatula. After that, the patch must be left until the paste hardens for two to three hours. Next, the acrylic is sanded with fine-grained sandpaper and polished with a piece of felt.
• The method of filling with acrylic can also be used when it is necessary to remove deeply ingrained stains, after the elimination of which, depressions remain on the surfaces.
• Another option for sealing through holes in the bath involves the use of polymer putty. It fills the resulting hole and waits for it to dry completely. After that, acrylic paste is applied on top of the putty and leveled with a spatula. The dried paste is processed with fine-grained emery, then, if necessary, painted, and the final step is the final polishing of the area to a perfectly smooth state.

It is quite obvious that, if desired, the owners can not only carry out ordinary cleaning, but also restore damaged areas of acrylic bathtubs without resorting to the help of a master.

Prices for popular acrylic bathtubs

In conclusion of the publication, summing up all that has been said above, one can repeat somewhat, highlighting key points, which are important to consider when caring for acrylic plumbing fixtures:

• In order not to engage in a very time-consuming, time-consuming and effort-consuming job of cleaning a heavily polluted bath, it is recommended to wash it regularly, after each water treatment.
• It is necessary to monitor the serviceability of the water taps and the shower - there should not even be signs of water leaks anywhere. All faucets should be tightly closed after each use. This way you can avoid the appearance of stubborn yellow rust spots on the surface of the bowl.
• It is recommended to rinse the bathtub with hot water, which will make the acrylic shine.
• Before choosing and applying a new detergent, you should carefully study its composition and method of application. It is better to test it on an inconspicuous small area of ​​\u200b\u200bthe surface.
• It is necessary to protect acrylic surfaces from mechanical influences, from contact with sharp objects, as well as from the claws of animals.
• Do not place a stool on the bottom of the bathtub, using it, for example, as a basin support during hand washing. The point pressure of its legs will certainly damage the acrylic surface.
• In case of contact with the surface of coloring substances, they should be removed immediately, preventing them from soaking into the pores of the polymer. Stubborn stains will be very difficult to remove.
• It is recommended to keep the bath in a dry state, so it is advisable to wipe it after each use and cleaning with a soft, well-absorbing cloth.

* * * * * * *

If you understand well all the nuances of the care of acrylic baths and their minor repairs, it will be easier to deal with both prevention and cleaning. The main thing is not to make hard-to-correct mistakes in this matter. In addition, who knows, it is possible that, after reading the information, some homeowners who are thinking of replacing their steel or cast iron model with a fashionable acrylic model will completely abandon this idea.

In conclusion - an informative video dedicated to the care of an acrylic bath.

Video: How to get rid of yellowness in an acrylic bath

Acrylic bathtubs are popular due to their hygiene, ease of installation and lack of corrosion. Such baths require careful maintenance, since the material from which they are made has flaws. But the benefits too . Acrylic bath care is the science of cleanliness. Let's try to study. Acrylic tanks have a good "life span". They will serve even children, subject to proper care of their surface. In order for a new purchase to “take root” in your home, you need to know how to wash an acrylic bath

Features of the care of an acrylic bath

Note! Bathtubs made of this material require careful handling! They should not be washed more than twice a month with cleaning products. After each use, rinse the tank walls with cool water and wipe with a clean sponge. A couple of times a week, scrub with a sponge and soap, rinse the surface, then wipe with a completely dry cloth. Choose a fabric that is soft and clean.

The bath should be wiped dry so that not a drop of water remains in it overnight. And wiping the tank every day with a sponge is a guarantee that the purchase will not have a raid. This material repels dirt and does not corrode like cast iron.

But if a plaque appears, the tank is washed with cleaners, and not with soap and water. Because the bath is a hygienic place. If there is a coating on it, it is dirty.

How to choose a cleaner?

Since comfortable acrylic bathtubs are being installed in the apartments of our country, housewives have been asking themselves new problems. : How to clean an acrylic bathroom? Detergents that washed out old cast-iron tanks will not work in this case. Acrylic products are not suitable for detergents containing:

• chlorine;
• acetone;
• ammonia;
• formic acid (or other acids).

The acrylic tank cannot be washed with boiling water. It is forbidden to use anti-plaque products with formaldehyde, ammonia and other corrosive elements. This will cause damage and the bathtub will have to be dismantled or rebuilt, which is expensive.

Acrylic bath care involves the use of special detergent compositions. But which of them will be of better quality, and what do the manufacturers of these products offer buyers? Using "anything" is not safe for your new bathtub. So what do you prefer? Here is a list of detergents and cleaners, each of which is fully consistent with its purpose.

Detergents will help qualitatively. Choose from the rating that suits your price range and has a tolerable smell.

Application of cleaning agents

Cleaning agents are used only in accordance with the instructions for use. These are not abrasive means, with which the surface is washed “until victory”. These detergents and cleaning agents are used in a different way.

1. This gel is applied to the surface of the tank (if it is a spray, it is sprayed along the surface).
2. It takes 10 minutes for the remedy to work.
3. Gently with a sponge and jet warm water dirt is washed away.
4. Rinse again with clean water and dry.

Sometimes all attempts to clean the bath from the stone are in vain. Clear old bath impossible. Try updating your plumbing. These reservoirs are restored thanks to the technology of applying a new layer of acrylic. It will cost less than buying new plumbing.

Folk remedies for cleaning

If you want to save money, then “home cleaning technologies” are also suitable. Western products are more effective, but they aggressively affect acrylic. Folk ways cleaning is cheaper. Let's take a look at a few ways.

You will need to do the following:

• fill a tank of warm (not hot) water to the top;
• pour 1-1.5 liters of vinegar;
• after 10 hours, drain the water and rinse the bathroom with a sponge.

Another nuisance that happens is rusty stains on the side of the tub from water flowing from the tap. It is easier to monitor the faucets and change them in time than to remove rust. Acrylic tubs will not rust. And there are no other reasons for the appearance of rust, except for current taps. But if this happened, how to deal with pollution? How to clean a bathtub from rust?

To remove rust, either special chemicals are used, or folk methods, who do just as well as their western cleaner competitors. Citric acid diluted in water in a ratio of 1:2 will help. The secret to making the mixture is simple:

1. A glass of water with citric acid diluted in it is thrown into a bath of water.
2. Literally after 10 minutes, the bath is washed out with water.
3. Wipe off.

Over time, yellowness appears on the bathroom . How to clean the bath from yellowness? The yellow color appears on the surface due to rust and salts that the city's tap water carries with it. It is impossible to wash off this plaque with abrasive substances or acid mixtures. Wash off the yellowness with the same vinegar (9%), or dilute oxalic acid. It is advisable to heat the water in which you will dilute vinegar or acid, but not too much. Since cheap acrylic does not tolerate high temperatures.

Contamination prevention and disinfection

High standard acrylic is guaranteed to last 25-30 years and look like new. Only care is needed for an acrylic bath and careful operation. Let us mention once again the rules for their operation. In an acrylic bath, in no case should you:

1. Soak and wash clothes.
2. Allow acids or alkalis to come into contact with the surface. No abrasive detergents.
3. Bathe pets. They scratch the surface of the bath with their claws. The disadvantage of the acrylic bath surface is softness and low strength.
4. Put any basins in the tank, whether plastic or steel, and wash clothes in them. This is how you put the tank at risk. There will be scratches.

As long as you stick to a weekly bath wash schedule and don't let it get damaged, there's nothing to worry about.

Before installing a new bath, plumbers recommend a more thorough repair and change water pipes for new ones. Then yellow plaque will not appear on the bath. The smooth surface is not subject to "attacks" of fungal diseases or corrosion. But it is desirable to carry out disinfection once a year.

Bathing pets in an acrylic bath is not recommended.

How is disinfection carried out?

How to wash an acrylic bath so that there is no doubt that it is disinfected and not dangerous for bathing small children? For disinfection, one more agent is needed - Ravak Desinfectant. Remedy from the Czech company Ravak. The company constantly checks its products for quality, and ensures that they are safe to use.

The order is:

1. The tank is filled to the top.
2. The agent is diluted in a ratio of 1:10 and poured out.
3. Mix and leave for literally 10 minutes.
4. Rinse afterwards with clean water and a sponge.

It is not used often, therefore, it is advantageous to purchase 1 bottle. It disinfects not only the tank, but also the entire bathroom. Ravak Desinfectant costs 600-800 rubles. for 500 ml. But remember, the product is highly diluted with water. After the disinfection procedure, you will be sure that the bathtub is clean and safe from bacteria on acrylic.

To wash the bath from rust and plaque, you will have to purchase a bunch of different products, and find the right one among them. After all, everything is known in practice. Folk methods for washing acrylic are also effective if there is no money for professional plumbing care products.

Each of the means listed in the rating has both advantages and disadvantages associated with the composition of the substance. There is no optimal detergent composition. If you can’t find these in the nearest store, another means for washing acrylic bathtubs is quite suitable. The main thing is to read the composition, and make sure that there are no chemicals in it: chlorine, ammonia or acids.

We will send the material to you by e-mail

A beautiful and elegant bathroom needs proper care

Acrylic features are such that it is wear-resistant and repels dirt in itself, which makes the product especially attractive. But the downside is that the surface is prone to scratches.

If you know how to care for an acrylic bathtub, then it will remain white for many years. A big role is played by daily cleaning after use. Constant care of the surface of the bath is carried out with a soft sponge or cloth. A suitable agent is applied to them and the product is wiped. After that, it is important to rinse it and wipe it dry. If the water is soft, then such a daily procedure will ensure the whiteness of the bathroom for a long time.

How to clean an acrylic bath from household chemicals at home

The abundance of household chemicals for cleaning different surfaces is often confusing. How to clean an acrylic bath at home from the entire range of cleaning products provided by the market?

Qualitatively work Acrylan, Cillit, Sarma, Acryl Net, Star Acrylat. Any of these products is applied to a sponge or napkin, which is used to wipe the walls of the container, and left for several minutes. After a while, the cream-gel is washed off with warm water. It is important not to forget to wipe everything dry!

Many people wonder if it is possible to wash an acrylic bathtub with Domestos: if you do not violate the cleaning rules, then you can. Domestos are not left on the surface for a long time due to the strong acids in the composition. It takes 5-10 minutes, then rinse with a sponge. If scratches suddenly appear, then they are treated with mastic or furniture polishes.

How to wash an acrylic bath from improvised means at home

If there are no purchased products, then how to clean an acrylic bath at home? It is not forbidden to wash the surface with dish detergent, liquid soap or shower gel. But citric acid and vinegar are excellent.

Citric Acid and Apple Cider Vinegar for Acrylic Bathtub Cleaners

We will tell you how to clean an acrylic bath at home with citric acid or vinegar.

Citric acid can be diluted with water so that the concentration is minimal. The filled bath is diluted with a solution of citric acid. 50 liters require 1500 ml. The solution is made from 2 tsp. hot water and 1 tsp. acids.

If you happen to have several lemons, then they can bleach the entire surface by simply wiping it with chopped fruit. The juice is not washed off for 8 hours. Acetic acid or apple cider vinegar perfectly destroys limescale and yellowness. Surfaces are treated in the same way as with a solution of citric acid in the same proportions, but the water is not drained for 10 hours.

Baking Soda and Toothpaste for Acrylic Bathtub Cleaners

Is it possible to wash an acrylic bathtub with soda? Definitely not. Acrylic does not tolerate any powdery substances - they leave behind small scratches. Although soda is able to cope with rust, it will ruin the surface after itself.

Toothpaste with a whitening effect can remove darkening: rub the stain with the paste, wait 5 minutes, and then wash it off with water.

Related article:

How to wash windows quickly and without streaks. Where do stains on glasses come from, folk remedies, household chemicals, procedure algorithm, necessary tools and devices - read in the publication.

How to wash an acrylic bath with a certain type of pollution

We will learn how to wash an acrylic bathtub if such impurities as lime, rust, yellowness appear on it.

Yellow spots and rust

Seeing rust on acrylic, many housewives are frightened and worried about how to clean the acrylic bath. Their fear is justified: Acrylic surfaces are easily damaged in an attempt to defeat rusty walkways.

Remove rust "Sunklyn", "Mr Chister" or means Triton. The sight of a yellowing bath can upset any owner. Yellowing can occur due to incorrectly selected cleaning agents, the solid age of the product or excessive water hardness. The “adult” container is updated by bleaching the liner, and the hardness of the water can be slightly softened with special products added when bathing. Acrylic care products provide for the problem of yellowing: they are applied to the entire surface, and then washed off after a while.

Limescale, sealant and adhesive

Limescale should be washed immediately: it can be removed with a soft cloth and lemon juice. How else to clean the acrylic bath from lime: fill the entire container with warm water and add at least 1.5 liters of a 7% solution of citric or acetic acid to it. Mix everything and leave for 12 hours.

The water is drained, the container is rinsed and wiped dry. The procedure is carried out once a year.

Important! It is impossible to tear off the sealant or glue - there is a high risk of damaging the coating.

from chemical solvents silicone sealant handle: Quilosa, Penta-840, CRC Gasket Remover.

Related article:

How to clean a mirror without streaks in different ways: with water, various folk remedies, household chemicals, an antistatic napkin, how to remove limescale and traces of stickers and markers - read in the publication.

Acrylic whirlpool bath care

Caring for acrylic whirlpool tubs includes cleaning the nozzles from soap and salt deposits. To cope with this problem, 20 liters of a weak chlorine solution are poured into the hydromassage system, after which it merges safely.

How to wash an acrylic bath so that it does not change its appearance, serves for a long time and pleases the eye with its unsurpassed appearance. In view of the fact that acrylic bathtubs appeared on our market quite recently, many people ask themselves the question - with what means to wash such bathtubs and how to properly handle them. There are no big difficulties in the procedure for washing an acrylic bath. The main thing here is to follow the rules of cleaning.

We are all used to bulky and heavy cast iron baths, and acrylic bathtubs, which are elegant in their form and light enough, at first glance seem fragile and impractical. That is why, many are wary of plumbing, which is made of acrylic.

Features of washing and caring for an acrylic bath

Unfortunately, many do not yet know the basic rules for the care of acrylic. It is worth noting that the surface of an acrylic bathtub requires more careful maintenance and therefore you should familiarize yourself with a number of rules for the care of this material. By following the basic care rules, you will be able to extend the flawless appearance of your bath.

Acrylic is a durable material. Its surface has a dirt-repellent effect, due to which microorganisms do not develop on it. In addition, the acrylic bathtub is not afraid of impacts, but it is easily scratched.

Features of washing an acrylic bath. The main thing is to be careful and careful when washing an acrylic bath. It is not recommended to use powdered and abrasive products as a washing agent, as well as paste containing chlorine, acid, alkali, and ammonia. Such substances contribute to the appearance of scratches on the surface, and also lead to the loss of natural color. Always carefully read the ingredients of the cleaning agent you use before cleaning your acrylic bathtub. Do not use metal and hard brushes - such brushes violate the integrity of the acrylic coating.

It is also not recommended to bathe your pets in an acrylic bathtub, put metal basins and buckets in them. Never bet various items in the bathroom - stools, metal basins and objects, as well as any other household utensils.

What improvised means can be used to wash an acrylic bath

To properly care for an acrylic bathtub, you must use a liquid with a cleansing effect as a washing agent. For this purpose, the composition for washing dishes is perfect, liquid soap, shower gel, etc.

If you find lime streaks on the surface of the bathroom, then it is not necessary to wash the entire container completely. It is enough to take a soft cloth, soak it in lemon juice or table vinegar and wipe the surface.

If you notice that some areas of the bathroom surface begin to darken, then it is enough to rinse the container with running water and wipe it with a dry and soft cloth.

If there are minor scratches in the acrylic bath, then its surface can be treated with a polishing material, in particular, it can be ordinary mastic. Furniture polish or car polish is often used for this purpose.

Special products for washing acrylic baths

The current level of development of the chemical industry has made it possible to develop special tools, thanks to which an acrylic bath can retain its original appearance for a long time. At the same time, with such means, any acrylic container is washed quickly and safely. I would especially like to highlight such funds as Acrylan, Cillit, Sarma, Acryl-Net, Star-Acrylat.

These cream-gels are specially designed for washing acrylic surfaces. The agent is applied to a napkin and only after that to the surface of the bath. The entire surface of the container is wiped with a napkin and left for 5 minutes. After 5 minutes, the product should be washed off well with warm water and wiped dry with a cloth.

To wash acrylic bathtubs, you can use universal products. The most popular all-purpose cleaner for acrylic surfaces is Ravak. It was developed using a special technology and is intended for washing acrylic surfaces.

In order to qualitatively get rid of the appearance of rust, it is recommended to use products that are designed to combat rust specifically from acrylic surfaces.

In any case, when choosing a product for washing an acrylic bathtub, always give preference to special products. Such products will not only gently clean the surface, but also give it shine and protection, in the form of a thin waterproof film. Now you already know how to wash the acrylic surface and you can provide it with proper care and increase its service life.

How to wash an acrylic bath - tips for washing with improvised and special means Video

Acrylic bath care: how to clean, what is not recommended to use, how to remove scratches?

With all the advantages, acrylic bathtubs have a significant drawback.

The low hardness of acrylic leads to the fact that products made from it are very easy to scratch.

But still, if you properly and timely take care of such a bathroom, it will retain its snow-white gloss for a long time.

We will tell you how to care for an acrylic bathtub, how to do it at home.

How to clean?

Asking for advice on this from the seller in the store, you will surely hear about a special "unique and only possible", a magical product for washing acrylic bathtubs at a sky-high price. Let's not scold him, that's his job. Let's just say that everything is much simpler.

To wash acrylic baths, you can use any household detergents, with some exceptions.

Deadly enemies of acrylic bathtubs:

How to clean an acrylic bath at home and how to do it right?

Acrylic bath: how and how to clean at home

Acrylic bathtub is a new alternative to traditional steel and cast iron sanitary ware. Acrylic itself is a hard plastic used in dentistry and now in plumbing. More recently, these bathtubs were quite expensive, but now, thanks to the improvement of production, they delight with their variety and availability.

Buying a Bath: Advantages and Disadvantages

Advantages of acrylic plumbing:

• The main drawback is the fragility of the material;
• it scratches easily. Therefore, you need to be careful when choosing cleaning products, as they can damage the top layer of the bath. How to wash and how to clean acrylic bathtubs, consider a little lower;
• acrylic loses its “presentation” if boiling water is poured into the bath or linen is soaked in it for a long time.

Problems encountered and solutions

Any plumbing that comes into contact with water can lose its new and beautiful appearance. The reasons for this may be the presence of lime deposits, yellowing of areas or the formation of rust.

There are many options to fix these problems at home. However, keeping modern ways and using an acrylic bathroom cleaner from trusted manufacturers, you can achieve a quick and high-quality result. How are acrylic bathtubs cleaned?

Great for cleaning acrylic surfaces. It is used only in liquid form. First, the substance is applied to a soft cloth. Then, uniformly, with light movements, wipe the entire area of ​​\u200b\u200bthe bowl. After waiting a few minutes, the solution is removed with a soft sponge and rinsed with warm, running water. The bathtub is wiped dry with a napkin and treated with a special polish to create shine.

Bass is also good for cleaning acrylic showers.

Its advantage is versatility. Washing cream and spray can be used to clean not only acrylic, but also any other surface: ceramics, stone, enamel, plastic. It does not harm even delicate surfaces, since it does not contain abrasive materials. However, it has a high level of efficiency that they can easily and, in just a couple of minutes, wash off rust, yellowness, lime and grease deposits.

This version of the tool is very practical, because, in addition to being effective in action, it is inexpensive.

This is a foam cleanser. Good for both bowls and booths. Regular use of acrylic will allow you to forget about rust, limescale and miles stains for a long time.

Suitable for delicate cleaning of acrylic areas. It effectively and sparingly removes rust, plaque, stains. The composition is environmentally friendly and harmless. Eliminates odors, forming a kind of shell on the surface, which eliminates the formation of new contaminants.

In the presence of an acrylic bathtub with hydromassage, Tim-Profi is the most the best remedy for cleaning. It will carefully clean all the dirt and ensure the correct operation of the mechanism for a long time.

This option is based on polymers and has antibacterial, cleansing and antifungal effects.

Important points for cleaning

When cleaning acrylic bathtubs:

In principle, with the selection of good cleaning products that do not contain aggressive components, the acrylic surface can be cleaned quite easily and quickly. For many, it has become a habit, after each use of the bath, to rinse it with warm water and wipe it dry.

Folk remedies

To remove lime deposits from acrylic surfaces, you can use citric acid. To do this, fill the bowl with hot water and throw a packet of ordinary citric acid into it, stir and leave for about 2 hours. After draining the water, rinse the entire area well with running water, wipe without leaving streaks. If such cleaning is carried out once a year, then chemical, production facilities may not be needed.

Small stains on acrylic can be removed with regular toothpaste and a brush. good cleaning guarantees soda with soap. First, we apply these components to the dirt, and after 20 minutes, wash it off.

Limescale and rust stains can win ammonia and hydrogen peroxide mixed in equal proportions. Wet the hard side of the sponge into this composition and wipe dirty, problem areas with it.

Fresh rust is well rubbed with soda. You can make a mushy mass and apply it for 20 minutes, and then wash it off. Old rust is removed with table salt. It is applied to stains and wiped with a hard area of ​​\u200b\u200bthe sponge.

A very dirty acrylic bowl can be cleaned with universal remedy- vinegar. A liter bottle of vinegar is poured into a bath filled with warm or hot water and left overnight.

bath once a year need to be disinfected. To do this, fill the bath with water at a temperature of 20 degrees. Then add a disinfectant, for example, Rawak. Mix the product thoroughly in water and leave the solution for about 10 minutes. Next, the bath should be well and thoroughly rinsed with running water, removing the remnants of the substance. Such work is done carefully and with gloves. After the procedure, the bathroom must be ventilated or ventilated.

Recent decades have pushed the acrylic bath to the first place in the world of sanitary ware. She has many positive keys, thanks to which she became a leader. And the main and important points in her care - regularity and knowledge. If you stick to how and with what to clean, then the acrylic bathtub will last for many years. Manufacturers assure that up to 35 years, an acrylic bathtub will be able to continuously work and delight its owner.

Cleaning an acrylic bath at home: how and with what to clean, the best remedy

Acrylic bath care: how to clean and wash at home

Acrylic bathtubs are very convenient and practical. But, like any other household item, they need daily care. Any hostess who owns this uncomplicated object of sanitary ware has at least once wondered “how to clean the inside of an acrylic bathtub and how often to wash it at home?”. We will try to help and give an answer to this seemingly simple, but very important question.

Acrylic Bathtub Daily Care

Acrylic came to the plumbing industry from dentistry. There it was widely used for cladding metal frames dentures and the manufacture of full-fledged crowns. Being a durable and wear-resistant material, acrylic easily competed with steel and cast iron in the manufacture of sanitary equipment (shower trays and bathtubs).

Acrylic is a fairly demanding material. Although it is resistant to impacts, small scratches easily appear on it, which subsequently darken and spoil the appearance of the bath very much. In order to avoid the appearance of microcracks and scratches, it is necessary to observe some precautions during the daily use of an acrylic bath:

1. Do not bathe pets. The claws of animals have a high density and can easily leave scratches that are invisible at first glance.
2. Do not place metal buckets, basins or pans in the bath. Metal is the main enemy of acrylic. In contact with metal utensils, acrylic acquires deep scratches.

Advice! In order for your bath to shine white, you need to provide it with daily care. To not allow heavy pollution. It is much more difficult to get rid of complex lime masses.

For those who daily wonder how to clean an acrylic bathtub at home, we will tell you that the best remedy for stains and plaque is prevention. It is sufficient to rinse the tub with clean water after each use. running water The best effect can be achieved by using a soapy soft sponge. And after washing, wipe dry in order to avoid drying drops of hard water on the surface of acrylic.

Strong contamination: radical cleaning methods

Even with the most careful care, serious contamination cannot be avoided. This can happen both through the negligence of the owner, and under the influence of hardness salts contained in the water masses. Also a dangerous enemy for acrylic is rust formed on damaged parts of the mixer, pipes or other metal elements. Acrylic absorbs the substance and it is not possible to remove it with a regular brush.

For rust stains or other contamination, special acrylic cleaners can be used. But their impact will be effective only on a fresh stain. In addition, chemicals should be used very carefully and diluted big amount water. Otherwise, concentrated chemistry can cause even more harm. As for limescale, acrylic is also cleaned of it using special chemicals.

No chemical agent can deal with old rust or limescale stains. More radical cleaning methods are used here. To do this, stock up on soft sandpaper and gently clean the stain with it. After that, the place of stripping is treated with polish for acrylic. This method is best entrusted to a warranty service specialist or a licensed technician.

Cleaning the whirlpool jets of an acrylic bath

The range of acrylic bathtubs is not limited to traditional products. There is a wide range of more expensive and considered elite in its category − hot tubs. The difference lies in equipping a conventional product with nozzles, into which, with the help of circulation pump directed flow of water.

If the hydromassage function is not used regularly, the jets may develop:

To clean such a bath, you need to carry out a number of activities.

1. Fill the tub with hot water 5-7 cm above the location of the nozzles.
2. Turn off the air massage function (if any).
3. Pour into water special remedy for cleaning these types of parts. Suitable cleaner dishwashers. If the dosage is not indicated in the annotation for the drug, use no more than 50 ml per bath volume.
4. As a disinfectant, you can use table vinegar, but not more than 1 cup.

At the final stage, clean water will wash all the nozzles from the detergent and the bath is ready for use.

Important! Do not use whiteness and other chlorine-containing preparations as a disinfectant. This is especially true for hot tubs. They not only damage acrylic, but also instantly destroy silicone and rubber seals.

Substances incompatible with acrylic

Acrylic baths are absolutely not protected from the effects of aggressive substances, so there is a large list of cleaning products, the use of which is strictly prohibited. Some of them remove the glossy sheen from the acrylic surface, while others completely destroy it.

These substances include:

• products containing fine abrasive in their composition;
• chlorine;
• acetone;
• ammonia;
• formaldehydes.

With abrasive products, everything is clear - they violate the surface of acrylic, forming small scratches on it. The fight against which will cost some physical strength and financial investment. Small cracks and scratches are rubbed with special polishes, and deeper ones are polished with a soft sandpaper or grinders, in special cases, they are filled with liquid acrylic, made specifically for repair work.

The decision to disinfect with chlorine can lead not only to tarnishing of the material and loss of gloss, but also to the formation of small roughnesses on the acrylic (destruction process). Acetone and other solvents, like ammonia, can also cause the bath to lose its gloss. But this is not the worst. Prolonged exposure of the solvent to the acrylic will inevitably lead to corrosion of the material and the formation of dilapidated areas.

Always remember that using chemicals for an acrylic bathtub, it is allowed no more than 1-2 times a month when carrying out a complete disinfection of the bathroom. On other days, it is best to resort to scheduled cleaning and use the least aggressive preparations: soap, soft cloth or sponge.

Cleaning products from improvised materials

Not everyone trusts chemical cleaners. In some cases, they can lead to disastrous consequences for acrylic. Sometimes the cost of products is beyond the buyer's pocket. Or the user is allergic to the chemicals. In such cases, the cleaning agent can be prepared according to folk recipes using improvised products, most of which are in the kitchen of any housewife.

1. Lemon acid. This recipe is designed to combat limescale. Acid pack dissolves in hot water, after which the liquid is added to the bath filled to the overflow hole. After 2 hours, the water is drained and the bath is washed with a large amount of clean water. Residual moisture is removed with a soft cloth.

There are many other ways to clean acrylic from stains, but the best of them is prevention. Avoid plaque deposits. Rinse your bathtub after every use and your bathtub will be sparkling clean for years to come.

How to clean an acrylic bath at home: how to wash and care

home » gable » How to remove brown spots in an acrylic bath. How to clean an acrylic bathtub