How to install blinds on plastic windows yourself. Technology for installing blinds on a plastic window

It is not always convenient to use curtains. In some cases, blinds are more practical and more convenient. They make it possible not only to protect yourself from immodest glances in the evenings, but also to regulate the level of illumination during the day by turning the lamellas (plates). We will talk about how to install blinds on plastic windows in this publication.

Structures and installation methods

Blinds on windows are of two types - vertical and horizontal. Vertical slats are usually made of plastic or special dense fabric, cut into strips 10-15 cm wide. Less common are aluminum slats or synthetic threads.

Lamellas of horizontal blinds happen plastic, wooden and metal. Regardless of the type and material, they consist of a cornice and lamellas. Eaves - a plastic or aluminum U-shaped profile in which the controls are located and to which the lamellas are suspended. Lamellas - horizontal or vertical stripes / plates, which actually close the opening. In order to be able to open and close the blinds, there are controls - chains or threads.

In horizontal models, there is also a control rod associated with a rotary mechanism. By rotating the rod, the angle of inclination of the lamellas is changed. This is how you can change the amount of light and the "transparency" of the window. If the slats are placed vertically (almost), they completely block the view. When horizontal, they almost do not interfere with the review, but there are still a lot of other positions.

Installation of horizontal and vertical blinds

When installing blinds, you need to fix the eaves. For fixing it, specially designed brackets are included in the kit. These brackets are attached to the window or wall, and the cornice is simply put on them (until it clicks).

There are several ways to install blinds on plastic windows:

The installation method of the blinds will have to be determined even before the purchase: the dimensions of the canvases depend on this. So the type of installation must be selected before measurements.

We take measurements

With the type of blinds (horizontal, vertical) and the method of their installation (on the wall, ceiling, in the window on the sash, in the window opening) you need to decide before buying. And even before the moment you start measuring. Because different installation methods require different sizes. Only with correctly made measurements, it will be easy to install blinds on plastic windows.

Another important point: each window needs to be measured separately.. Sometimes it just seems that they are exactly the same. Believe me, there is a difference. And the measurement results must also be recorded and signed, which specific window you measured and which sash it is. Accurate and detailed records will help to avoid confusion during purchase and installation.

In the window opening

Although the appearance of the products is different, when measuring there is no difference between horizontal and vertical models. If you are going to install blinds in a window opening, you need to subtract 2 cm from its width on each side. You can subtract 1-3 cm from the height of the opening. Such gaps are needed so that the canvas hangs freely in the opening and the lower edge of the slats does not rub against the window sill.

Please note that you can install blinds on plastic windows “in the opening” not flush with the edge of the opening, but deeper - at the very glass or stepping back 5 or more centimeters from the edge. If the opening has a trapezoidal shape, the height/width of the opening will be smaller for the glass, so we take measurements carefully. And yet, in this case, it is better to put marks for installation when measuring. Then you will know exactly where you will need to install the blinds on the plastic windows so that their dimensions fit perfectly.

On the ceiling or wall

Here the measurements depend on your desires. The length of the blinds can be up to the floor or just up to the windowsill. Moreover, depending on the type of installation chosen, the lamellas can cover the window sill or not. So the length is whatever you like.

This is a wall mount. When mounted on the ceiling, the length will increase., And how much - you choose

The width of the blinds with this installation method is wider than the window opening. How much wider depends on your desire, but the minimum entry is 5 cm on each side. But if the window is in the same plane with the wall surface, you will need additional brackets that are not included in the package: the slats must be placed at least 5 cm from the glass surface so that they do not interfere with opening the sashes for ventilation.

on sashes

When installing blinds on a multi-leaf window, there are two possibilities - put one device on each sash or order one long one for the entire window. Usually the first option is chosen - it makes it possible to open and close the sashes with the blinds lowered. If you choose this installation method, you will need to measure each sash and record the results. Sash can be different, so be careful.

The width of the blinds when installed on the sash is taken 3 cm wider than the glass. When hanging, the lamellas overlap by 1.5 cm on the profile. It is convenient and does not interfere with opening / closing windows. The length depends on the location of the fastener, but usually it is 5 cm longer than the height of the glass.

Once again, we draw your attention: we measure each sash!

How to install blinds on plastic windows: fasten to a wall or window opening

The first step is to mark up. We install brackets in the eaves. We place them on the right and left so that they do not interfere with the operation of the blinds. The installation height depends on the selected product length.

We apply the curtains, mark with a pencil on the wall the places for installing fasteners in the brackets. If we mount horizontal blinds (they are light and create almost no load), it is enough to put one self-tapping screw / dowel. Vertical ones are heavier, so you need to install all the fasteners from the kit.

There is also a second way. At the selected level, use the building level to draw a horizontal line, try to avoid tilting - this will affect the blinds (skew). Attach the bottom of the bracket to this line, use a pencil to mark the holes through the holes for drilling. If the length of the cornice is more than 2 m, an additional bracket is required to increase the rigidity of the structure, which is attached in the middle.

When attaching to brick or concrete, at the marked points, we drill holes in the wall or ceiling. Drill or hammer - who has what is available. The diameter of the drill depends on the size of the dowels. They usually come with a kit, but you can put your own.

We insert expansion dowels into the finished holes, carefully hammer them with a hammer. We put the brackets, fasten them with screws or nails (if using a dowel-nails). We install the eaves on the brackets, insert the plugs on the sides. For horizontal blinds, attach a rod (handle) to control the swivel mechanism. To do this, install a special hook (included) directly into the mechanism itself, attach the tip of the rod to this hook.

Installation of horizontal blinds on PVC window sashes

With this method of installation, the blinds are fastened with small self-tapping screws (included) in the window profile. Install them so that they do not interfere with the handle to turn. Be careful: if you drill too close to the glazing bead, you can damage the glass unit. Therefore, in this case, correct measurements are very important.

Installation step by step

The procedure is as follows:

Having to drill holes in a window frame can be intimidating, but there's nothing to worry about. In case of incorrectly made holes, unsuccessful ones can be filled with sealant. White silicone, not acrylic (acrylic quickly turns yellow). The characteristics of the windows will not be affected. What can be dangerous is getting into a double-glazed window. Then it might crack. But this is not fatal - it can be replaced, although it will not be cheap.

Installing the bottom brackets

But that is not all. To finally install horizontal blinds on plastic windows, you need to drill a couple more holes - under the latches (also called anti-wind). These are additional fasteners at the bottom of the opening sash of the window. The lower edge of the blinds is tucked into them. They do this so that when airing the blinds do not hang down, do not dangle from the wind and do not knock down objects on the windowsill.

Don't chat...

We set the clamps like this: we try on, pulling the blinds down a little, mark the places of fasteners, drill holes, install. We fill the lower bar into the installed clamps. Now, even with a draft or an open sash, the blinds will not hang out. The only thing to watch out for during installation is not to get into the glazing bead (this is a long bar that runs along the double-glazed window and holds it). It is necessary to drill a hole in the frame itself, stepping back at least 1 cm from the edge. Otherwise, there are no problems.

without drilling

There is also a way to install blinds on plastic windows and not drill the frame. This method is available only for those blinds that are hung on opening sashes. In this case, they are simply hung on plastic mounts / brackets that are put on the frame from above. To prevent them from moving, a strip is attached to the back of the bracket double sided tape. After removing the protective film, it can be glued (but you can not fix it).

These L-shaped plastic brackets are not included, but you can buy them from a store or from a company that sells horizontal blinds. This method is convenient by simply dismantling the blinds, which is convenient if they need to be repaired or washed.

Assembly of vertical blinds

Vertical blinds are installed in exactly the same way as described above. The difference is that the slats are installed after the eaves are fixed (the guide along which the runners move). For convenience, before attaching the slats, you can turn the sliders with an adjustment cord so that the slots in them are perpendicular to the eaves. Next, simply snap the lamellas into the sliders, inserting the strip until it clicks. So, in turn we fix all the lamellas.

If the slats are made of fabric, then after installing them, do not forget to insert the lower weight. Next, we attach the lower connecting chain to the lamellas.

Installation of vertical blinds is completed.

Installing blinds on windows is not such a difficult process, you can do it yourself. There are different ways of fastening for different types of curtains and each of them has its own installation nuances.

Mounting methods

There are three types of blinds fastening: to the wall, ceiling, directly on the frame, and two ways - with and without drilling. The universal basis of any fastening is a cornice, which different ways mounts to a wall, frame or ceiling.

with drilling

Fastening is carried out using self-tapping screws and brackets, on which the cornice, fishing line is installed. Additionally, you will need a pencil, ruler, drill, screwdriver.

First you need to make a markup in those places where the brackets will be located. For reliability and accuracy in the marked places, it is necessary to drill holes for the clamps. Then, applying the brackets in turn to the PVC frame, fix them to the markup with a screwdriver. Next, a cornice is installed and the whole structure is assembled as a whole.

without drilling

If in the future it is planned to replace blinds or other window decoration options, it is not recommended to damage plastic windows. Holes from self-tapping screws will remain in the frame forever and significantly spoil the appearance of windows. In this case, it is easier to turn to a method that does not require drilling.

Brackets in this case are attached in two ways:

for the upper part of the PVC profile on the opening sashes(you can just hang it like a hook);
on double sided tape, which can be glued without fear of leaving marks.

A special approach requires fastening the blinds on the balcony. The balcony structure plays an important role here. The choice of these or those blinds and the method of their fastening depends on the type of glazing.

In general, almost all options are available for balconies. Particular attention should be paid to the type of blinds, since not all of them are universal for different types of windows.

For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can be deformed during operation or from strong winds.

The nuances of installing different types of blinds

Horizontal

A light-shielding design with a horizontal arrangement of slats that has become familiar, almost classic for window decoration. Advantages:

Compactness. Are established directly on a window, leaving a window sill free. This saves space and allows you to place greenery on the window in favorable conditions for it.
Light weight design.
The strength and rigidity of the lamellas, preventing deformation.
Fire safety.

Simple control mechanism.
Special coating or impregnation against dust, dirt, odors and grease.
Resistant to humidity and temperature extremes.
Miscellaneous materials for the manufacture of lamellas: wood, plastic, aluminum, less often fabrics.
Easy installation.
Affordable price.

It is worth mentioning some of the disadvantages:

When mounted on a frame, the angle of inclination is limited window sashes when opened.
The slats emit a characteristic knock or ringing in the wind. To avoid this, it is necessary to purchase lower fasteners, which are not included in the kit and quickly become unusable.
The structure is subject to repair in case of severe deformation of several slats, but it will cost like new blinds.
Not suitable for balconies and loggias with sliding windows.

vertical

Blinds, as the name already implies, are a simple and convenient light-shielding structure consisting of longitudinal vertical plates.

Distinguishes them from horizontal ones:

More aesthetic appearance. Horizontal blinds are more functional, while vertical ones are decorative.
The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are designed for minimalistic decoration of small windows. Vertical models have different widths and easily cover the area of large windows, arches and doorways.
Variety of materials. They can be made of wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, filament. The abundance of materials provides another advantage - the variability of colors and textures.
Modern and original window decoration, opening up more design possibilities.

Simplicity of control mechanisms. Possibly both mechanical and electrical.
The ability to place photo printing on the "curtains" due to the larger surface and the best performance material.
Practicality. Larger lamellas are easier to clean if necessary, which occurs infrequently. If in case heavy pollution, for example, in the children's room, the slats will still need to be subjected to hygienic procedures, it will not take much time - they can be washed by hand and in a washing machine.
Possibility of installation on non-standard windows(triangle, trapezium, arch, bay window).
The structure is in need of repair. To replace a particular part, you do not need to call the master, the repair is simple enough to do it yourself. You can replace the lamellas one at a time without dismantling the entire structure.

Rolled

Roller blinds, roller shutters are solid canvases, often made of textiles, but other materials are also possible, which, like horizontal blinds, roll up.

The height can be adjusted by fixing the curtain with a weighting agent on the bottom bar of the canvas.

Exist different types roller shutters: with an open drum (for mounting directly on the window) and with a decorative cornice; "mini" for installation on each frame separately and "roll-cassette" for curtaining the entire window as a whole.

There is an opinion that roller blinds are the most budgetary and practical option window decoration, but this is not entirely true.

Of course, roller shutters have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (wet cleaning is allowed) and operation, the ability to fix the curtain at the desired height, special impregnations from dust, moisture, high temperatures and glare, compatibility with other types of curtains.

A roller blind is convenient if necessary to hide the room from the sun, decorate the window with beautiful tulle so that it is not visible from the street what is happening inside.

But with so many advantages, curtains also have significant disadvantages:

The budget price is a delusion. Yes, by itself, a medium-sized curtain made of a common material will be inexpensive, but it will look boring. In order for the window design to be complete, it is necessary to think over additional decor, and this increases the cost at times.
Roller blinds in the bedroom, office and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise.

It is impossible to make a custom-made curtain from a certain textile. You can choose only specific products of a certain brand, since the set of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout.
Maximum Width roller blind– 280-300 cm, that is, it will not work to close a large area with one cornice, for example, a panoramic window or a balcony.
There may be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. There will inevitably be gaps on the sides of the window openings. Ceiling or wall mount preferred.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, pleated fabric, which resembles accordion furs. The range of materials, colors and textures is very diverse.

Peculiarities:

They close from top to bottom, like classic canvases, from bottom to top or from both sides at the same time. At the same time, the degree of density of the "accordion" can be adjusted, thus closing either the upper, or lower, or central part of the window.
Suitable for curtains irregular windows.
The optimal solution for attic, attic, ceiling and inclined windows.
“Opening”, the canvas is compactly folded and hides inside the eaves.

Suitable for installation on all types of windows and glass panes.
Various ways mounts and control mechanisms (manual and electric).
The woven fabric is washable.
Curtains can be made from two types of fabric at the same time, which makes it possible to adjust the degree of transparency, darkness, protection from the sun.
Easy installation can be done by hand.

Kinds

Classic. By appearance most similar to horizontal blinds, however, they can also be vertical. Made from fabric, paper or plastic. Designed for darkening the room, protection from heating by sunlight, zoning the interior space of the room.

Inclined. A kind of pleated window, especially for windows that are located at an angle in the attic or ceiling. Their feature is in a specific assembly system, which does not allow the web of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look more even, neat and dense. Corrugated plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

Arched. The most flexible canvases that take any shape, like a paper fan. A good solution for rooms with non-standard window shapes (arches, trapeziums, triangles, beveled windows).

"Day Night". The canvas of such blinds consists of two layers of fabric: a light fabric that transmits a large amount of light for daytime use and a dense, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid sheet, but are not horizontal blinds or roller blinds.

They differ in the types of cassettes (angular, round, flat), controls ( different kinds mechanical and remote), the materials used (plastic, textiles, bamboo, aluminum).

Their main feature lies in the design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, the appearance of wrinkles and irregularities, and completely opens the window sill.

Advantages:

Compactness. Cassette blinds occupy a minimum of space, leaving the owners the opportunity to show imagination and organize additional window decor or leave the window sill as a functional surface.
Simple and clear type of management.
Long service life. Special impregnation protects the cloth from dust, grease, dirt, moisture, abrasion.
Ease of hygiene procedures. Cassette systems do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water every few months.

A variety of designs for the interior in any style.
The snug fit of the canvas to the glass surface protects equally well from heat and cold.
The ability to mount the system yourself.
A variety of materials - from light window decoration to total blackout protection.
The ability to combine blinds with curtains, tulle, lambrequin.

Measurements and tools

The final result depends on how correctly the measurements are taken. Even expensive beautiful models will not look good on the window if there are gaps in the opening or the edges of the lamellas constantly lift up against the wall.

It is important to pay attention to the following points:

For the most accurate readings steel tape measure and metal screws are used.
Numbers cannot be rounded., the accuracy must be maintained to millimeters.
When ordering blinds the width parameter is specified first, the length parameter is specified second.
No standard window opening has absolutely perfect geometric shapes., therefore, measurements up and down must be made at least at two points.

Horizontal

If you plan to mount blinds on the movable half of the window, you will need to measure the gap between the glazing beads and add at least 30 mm, which will prevent gaps in the structure. The height of the blinds is equal to the height of the window sash. To install a window inside the opening, measurements are required at three points in height and width, since the openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) with a margin of 1 cm. To install the cornice, an additional 30-40 cm will be required to the slopes and hinges. The chain of command is 2/3 of the height of the window. When choosing to fix the cornice to the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor arbitrarily.

vertical

When installing in the armhole of the window, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right side arches, subtract 1cm from the smaller value. For wall mounting, at least 10 cm must be added to the wide side of the slope. The length of the lamellas can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. at 100+ mm.

Rolled

For mounting the canvases to the wall, only one measurement is required - from the edge of the window sill to the markup for the brackets, and the width can be up to 300 cm. 15 mm.

Pleated blinds similarly do not require a professional approach in taking measurements and installation.

How to hang on the wall yourself?

Installation work on window decoration requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features in this work. Installation of blinds begins long before the preparation of the work surface and a set of tools.

The first step in this process is a balanced decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room.

So, it is more expedient to choose vertical blinds for the living room that let in light, for the bedroom - automatic roller blinds with an electric drive made of blackout fabric, and for the kitchen, where the smells of cooking and combustion products of food are constantly hovering - plastic blinds that do not absorb grease and dirt.

The second important point is the correct markup. Much depends on it, including how easy the installation process will be.

If all the features of the architecture of window openings are taken into account by specialists when ordering blinds from them, everything will go smoothly and easily without the help of professional installers. It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with the markup and subsequent verification of the functionality of the structure. Here the most important point is the choice between fastening - with or without drilling. It is also necessary to provide for the type of control.

For low windows, one of the varieties of mechanical control is an excellent solution. Roof windows, slanted windows, windows in the bedroom are suitable for magnetic, automatic (electric) control with an electric drive.

Ceiling Mounting Instructions

First of all, you need to mount the blinds, assemble the brackets and install them on the reel. Then this design must be fixed to the ceiling in order to mark up for mounting.

The second step is to attach the brackets to the adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is desirable to eliminate problems with subsequent drilling of holes for the screws. After installing the guide string, the curtain itself is mounted in the mechanisms.

What is the best way to install automatic electric window blinds?

Automatic blinds are the most convenient way to decorate a window for self-execution.

They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling. In all cases, the fastener is a cornice with decorative facade or without it.

The brackets on which the structure rests are fastened with self-tapping screws, hung or glued on double-sided tape.

Special adhesive tape, despite the seeming impracticality, is fixed very firmly, so it is important to correctly mark the brackets for installation. Once they are glued, moving them will be very problematic.

Installation order:

Preparing tools. You will need a stepladder, a set of self-tapping screws from the kit, a building level and drawing accessories, a drill, a screwdriver.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Mounting brackets in a suitable way (with or without drilling).
Cornice installation.
Lamella installation. To do this, you need to pull the control cord, on which the fasteners for the slats are located, so that they stand in the desired position. Then fix all the slats on the fastening hooks.

How to attach cassettes yourself?

Cassette blinds can also be installed independently. Before installation, you must read the instructions, make sure that the complete set is complete, prepare all the necessary tools: a screwdriver, drawing tools, a screwdriver, a drill, cotton pads or a small piece of cloth, a degreaser.

When everything you need is collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, raise it to the top of the frame, focusing on the guides, drill holes for the fasteners, fix with screws.

You can use a screwdriver for this purpose, or you can perform the process manually with a Phillips screwdriver.

When the box is installed, you need to fix the covers on the sides. After that, you can glue the guide rails to the degreased frame. The guides should be below the corner of the glazing bead by a few centimeters.

We hang aluminum curtains-blinds on sliding windows

For installation, you will need a set of tools: wire, drill, cross-section screwdriver, screwdriver, drawing accessories.

Instructions for installing blinds on sliding windows contains a list of items that is performed step by step:

Draw a marking line for the installation of brackets. It should take into account the distance between the latches and the control mechanism, between the brackets (from 60 cm) and to the extreme sections on the blinds bar (25 cm). With a large width of the blinds and significant weight, it is recommended to use intermediate fasteners.
Drill holes on the surface to which the brackets are to be attached to install the dowels. On plastic windows it is possible to apply blinds without drilling.
Mounting profile.
Fixing the upper rod of the blinds on the brackets. It is important to remember that the blinds at this stage are already assembled.

Working with aluminum options on sloped surfaces requires a little more effort and skill.

How to fix the bottom?

The simplest and affordable way for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows.

It is carried out step by step:

Degreasing of frame sections and fasteners, which will be connected with adhesive tape.
markup roller shutter fixings.
Mounting. The chain mechanism can be installed from any convenient side.
Assembly brackets.
Bracket mounting markings. To do this, you need to install them on the assembled roller blind, install it on the window without fastening, mark the places for the adhesive tape with a pencil, remove the curtain.
Application of adhesive tape on the rear surface of the brackets, window mounting.
Setting the guide wire against sagging. It is attached to the “ear” of the upper bracket and curtain weighting agent, and is fixed at the bottom in the tensioner, which is installed on the frame.

This video shows how to hang horizontal blinds with your own hands.

Blinds have recently gained extraordinary popularity not only in offices, they are also happy to be placed in residential premises. Fastening blinds to windows - perfectly protects against direct sun rays, without interfering with airing and opening windows at all.

Manufacturers offer several types of blinds

vertical;
Horizontal;
Accordion or pleated;
Roll type folding.

Vertical blinds have the form of vertical slats (strips) connected to each other, which move around their axis with the help of a plastic chain. Also, they can be moved left or right.

The principle of operation of horizontal blinds is the same as vertical ones. Only folding occurs from the bottom up.

Pleated - look like an accordion, for this they are impregnated by special means so they keep their shirred shape. They can also be attached to plastic window, and on the window opening.

Roller blinds - have the form of a continuous canvas that can be rolled up, while opening or closing part or all of the window.

Lamellas according to their materials can be:

metal;
wooden;
bamboo;
plastic;
made from fabric.

What blinds are the best option for a balcony?

Before you start placing blinds on plastic windows, you should understand whether they are needed at all. Will they become a hindrance when closing or opening a window.

One thing can be said for sure - if a loggia or balcony is converted into a separate room, then blinds are a must.

When choosing blinds, in addition to design and appearance, special attention should be paid to the following points:

functionality and practicality of fasteners;
keep in mind that not all types of fasteners are suitable for window blocks;
practicality of blinds;
it is better to choose plastic or fabric material for a balcony, wood and bamboo can create unnecessary noise.

What kind better blinds to the balcony?

How to fix blinds on plastic windows without drilling video:

Nuances when fastening blinds of different types:

Vertical blinds

Features of mounting vertical light filters are that they are suitable for mounting on a window opening, wall or ceiling. They are not suitable for mounting on sashes and are attached only by drilling.

Horizontal blinds

The most standard blinds that are suitable for almost any plastic windows. They are considered universal, it is possible to mount them both on each sash and between frames.

Roller blinds

For ease of use, roll filters are best installed on window sashes. If they are placed in a window opening or attached to a wall, then it will not be possible to close or open the window with the light filters closed. In addition, roller blinds are very delicate, you need to take special care during installation.

Roller blind installation video:

How to properly remove blinds

Over time, like everything in the house, window structures become covered with dust, so the blinds should be removed for cleaning. Each type has its own characteristics when removing.

Removing vertical blinds

We transfer the slats to the open state, after which we collect them;
We release the chain from the weights and take out the weights;
We remove each lamella: lift the clip of the slider and take it away a little, take out the lamellas one by one.

Removing horizontal blinds

Remove the cornice from the bracket;
We collect the lamellas at the top and look for the protrusion of the latch;
Pull the latch towards you and to the right;
We remove the slats.

Removing roller blinds

There is a tongue on the bracket, it must be bent using a screwdriver;
Remove the shaft by pulling it towards you.

A short video on how to install blinds on plastic windows:

At first glance it may seem that the installation of horizontal blinds seems easy and simple process. However, it is worth considering that the windows and walls in houses are most often uneven, so the installation of horizontal blinds requires appropriate experience and knowledge.

If there is confidence that the blinds can be fixed independently, then it is necessary to adhere to a certain installation technology.

This will require tools such as a Phillips screwdriver, hammer, hammer drill or impact drill, drills and drills. The first thing to do is to decide on the method of mounting horizontal blinds - to mount them on the frame or in the window opening, to the wall or to the ceiling.

Only after choosing the place of attachment and correctly performed measurements, you can proceed with the installation of blinds. In order for the installation of horizontal blinds to be carried out reliably and efficiently, it is necessary to use fasteners - brackets or brackets that are equipped with any blinds.

Brackets can be used to securely fasten blinds to almost any surface.

Video: Blinds on plastic windows. Measurement and installation.

Horizontal blinds installation technology:

1. Mark out the places where the brackets will be attached. When marking, it must be taken into account that the brackets must not fall on the latch and on the control device. Using a ruler and level, mark the location of the fasteners from each other at a distance of more than 60 cm and less than 25 cm from the uppermost sections of the blinds.

If the width of the blinds is large, you can use intermediate fasteners to increase the reliability of the installation. One of the brackets must be placed close to the raising-lowering device, since in this area the louver device is subjected to the greatest load.

2. Consistently drill holes in the wall, insert dowels into the marking places. Screw the brackets with screws. It is very important that the screws and dowels are completely similar to the fastening, wall or ceiling material.

If in the plans the horizontal blinds are fixed to the PVC window frame, then it is not necessary to drill the window profile, as there are special brackets designed for plastic windows. It is worth replacing that this method of fastening can only be suitable for a swing-out sash.

3. The installation of the blinds eaves on the fasteners is in progress.

4. The upper rod of the blinds is put on the brackets and locked with a latch. Moreover, horizontal blinds should already be assembled.

The installation of inter-frame horizontal blinds has some differences from the technology presented above. Such blinds should be installed in the internal space between the panes.

That is why, when installing them, the brackets are first attached to the upper eaves. Then, due to the compression, a flexible adapter is attached to the swivel rod.

The control device is brought into the room through a pre-drilled hole. Only upon completion of these operations, it is possible to proceed to fastening to the frame of inter-frame horizontal blinds.

Video: How to install horizontal blinds yourself

The fashion for bulky curtains that collect a significant amount of dust in record time has already passed, so most people prefer to use light airy fabrics to decorate the window area. To protect the window of the room from strong sunlight and curious passers-by or neighbors are increasingly using horizontal blinds.

Horizontal blinds are easy to use, which is why they are popular.

It is not difficult to figure out how to install horizontal blinds, but in this matter there are a lot of subtleties that need to be taken into account so that in the future the mechanism works correctly and performs its function. Blinds can be made of wood, plastic and aluminum, the latter being the most common, as they are extremely easy to use and can be mounted on all types of window frames.

What you need to install blinds effectively

Blinds are sold ready to install and with a full set of fasteners, so you can install them yourself. When buying these interior elements, you can order the desired size that will fit under the window. In addition, you need to pay attention to the type of fastening of the blinds, since in some cases, in order to fix the blinds mechanism, it is necessary to drill the window surfaces, while in other cases this can be dispensed with. The most common option is blinds that have standard twist brackets that are mounted on self-tapping screws, since with this type of fastening you can quickly.

Despite the fact that after reading the installation instructions it may seem to many that it is not difficult to install blinds, in fact, you need not only to have the whole range of necessary tools, but also certain skills, without which installing blinds on windows can take a long time.

Before installing horizontal blinds, you should take them out of the box and check if all the fasteners are available, as well as prepare all the tools that may come in handy during the work. To necessary tools relate:

crosshead screwdriver;
roulette;
spirit level;
a hammer;
marker;
cutter;
pliers.

Then you need to think about how to install blinds on the window.

Back to index

Preparatory stage for the installation of horizontal blinds

During the preparatory work it is very important to do the markup correctly. First of all, it is necessary to ensure that the structure, after being attached to the window frame, does not close the window handle and does not prevent it from opening and closing. Next, you need to use the level and tape measure to determine the optimal place for attaching the brackets.

When choosing the optimal place for attaching the brackets, it is very important that one of the upper brackets is located in close proximity to the mechanism that controls the opening and closing of the horizontal blinds, since during use this place takes a lot of effort, and if handled carelessly, you can break the mount.

After defining optimal places fastening, you need to fix the measurements with a marker. Often, self-tapping screws are not included in the set of brackets for horizontal blinds. right size. It is best to use self-tapping screws for fastening the brackets, the size of which does not exceed 10 mm, since very long self-tapping screws can lead to a violation of the tightness of the window. If the tightness is broken in the middle of the plastic window, water vapor will accumulate and undergo a condensation process, which will eventually lead to the accumulation of a large amount of liquid inside the window and failure of the mechanism that opens the window.

home » Roof calculation » How to install blinds on plastic windows yourself. Technology for installing blinds on a plastic window