For the development of industrial production, wholesale trade, logistics business, it always requires a decent area storage facilities. In addition, warehouses-shops and Internet trading platforms that do not have separate areas for the sale of goods are becoming more widespread.

What is the difficulty

Of course it doesn't represent special work erect a small warehouse building from materials that already have heat-saving properties. But if we are talking about areas and volumes for organizing the storage of products, raw materials or goods, calculated in hundreds and thousands of square and cubic meters, then traditional ways construction will not be economically justified.

Hangars and warehouses of large areas are most often built according to frame technology or using prefabricated structures. An example is the well-known arched metal structures assembled from wave-shaped steel sections.

The steel of the sections does not retain heat at all in winter and does not protect the internal volume from heating in the sun in summer. There are also warehouse structures made of concrete slabs also in need of thermal insulation. What methods and materials are used to improve hangars and other large premises?

Methods for insulating structures made of metal and concrete

Among the variety of ways to preserve heat in a warehouse, several basic and acceptable in terms of efficiency deserve attention.

Method 1: Create an Inner Path

The method of insulation by building an internal contour consists in the construction of a light, insulated, non-bearing frame structure inside the hangar.

Installation can be done according to various technologies- using wooden slatted or metal profile frames with the installation of foam or slab insulation in them and then facing with panels.

Significant disadvantages of the method are the reduction of the useful area of ​​the warehouse and the high cost of construction.

Method 2: insulation with basalt and glass wool slabs

Warming with slab, basalt or glass wool material as a method is effective in terms of heat conservation, but inconvenient to implement. In fact, this is the same option as with the internal contour, but the frame is mounted directly on the walls of the warehouse.

This additionally loads the hangar sections and may affect its stability. In addition, the fastening of rails or profiles to the steel of the walls may present a certain difficulty. Another disadvantage of this method is the moisture that inevitably accumulates in the thickness of the insulation and does not go outside.

Method 3: foam as a heater

Insulation with polyurethane foam has become popular. This material exists in two forms - in the form of plates and in the form of a liquid mixture, which, after application, foams itself. Plates insulate the outer surfaces of wooden or concrete walls, and the walls inside the premises are treated with foam. Liquid polyurethane is probably the most suitable insulation for steel structures.

Construction foam has good adhesion to any surface. Its heat-conducting properties do not depend on the shape of the walls, and the degree of insulation can be adjusted by the thickness of the layer. The disadvantage can be considered the impossibility of processing at negative temperatures of air and walls.

Materials: properties and comparison

Let's consider several main characteristics that are essential specifically for insulation of warehouses and hangars:

• thermal conductivity, i.e. the degree of insulation of a layer of a certain thickness;
• flammability or the ability to sustain combustion. The security of the premises from fire depends on this parameter;
• specific gravity or the load that the building structure will bear from insulation.

This insulator has the following features:

• specific thermal conductivity: about 0.030 W/m*K. This figure characterizes both glass wool and basalt materials;
• combustibility: do not burn and do not support combustion. Glass wool slabs withstand temperatures up to 400°C without loss of properties, and basalt fiber slabs - up to 1000°C. The walls of the warehouse covered with basalt fiber are able to withstand open fire for a long time;
• specific gravity: depends on the density of the board and ranges from 35 kg/m3 to 180 kg/m3. To insulate a steel wall, 15 cm of a layer with a density of 100 kg/m3 is sufficient. Thus, on a plot of 1 m2, the load will be 15 kg.

Styrofoam and expanded polystyrene

Styrofoam or expanded polystyrene in a solid, slab version have the following qualities:

• thermal conductivity: for polystyrene - 0.037 kg / m3, for expanded polystyrene - 0.027 kg / m3, which is quite comparable with the characteristics mineral wool;
• degree of combustibility: polystyrene foam and polystyrene foam can burn, but in modern production fire retardants are added to them, which makes it possible to assign a combustibility class G1 to these materials and call them non-combustible. The heat resistance of foam materials is low - they do not withstand heating even up to 250-270 ° C, and when burned, they emit gases dangerous to humans;
• specific gravity: foam plastic - 100 kg/m3, expanded polystyrene - 40 kg/m3, polyurethane foam ( polyurethane foam) - 40-80 kg/m3. 1 m2 of foam plastic with a layer of 15 cm will have a weight of 15 kg, polystyrene foam - only 6 kg, and polyurethane foam - from 6 to 12 kg.

Heaters such as mounting or building foam have the same characteristics as polyurethane foam board materials.

Comparative analysis

An elementary comparison of the characteristics shows that the degree of insulation of all materials is almost the same, the minimum weight is polystyrene foam and polyurethane foam. Moreover, the calculation did not include the weight of the frame structure, which is necessary if mineral wool or hard foam material is used. As protection against fire, it is most reliable to use stone wool. However, liquid polyurethane is the easiest to install.

Another important characteristic is the cost of materials. The most expensive are stone wool insulation, the cheapest are foam boards. The choice of thermal insulation for a warehouse depends on the design features, wall material and financial capabilities.

Installation work

The technology of insulation with fibrous and slab materials can be described in the following steps.

The frame is assembled from wooden slats(usually for foam) or metal profiles.

The frame is fastened to the walls either with self-tapping screws or with dowels, metal profiles can be attached to steel structures with wire and welding. The thickness of the frame elements must correspond to the thickness of the insulation sheets.

To prevent the accumulation of moisture inside the mineral wool layers, it is advisable to place a vapor barrier on both sides, and if the installation is carried out outside the walls, a windproof vapor-permeable membrane. Films should be fastened with slack so that thermal fluctuations in the dimensions of the hangar structures do not damage them.

The frame is usually placed inside the building. However, in order to preserve useful volumes, it is possible to insulate the outside, followed by cladding.

Slab laying

Plates, sheets or rolls are placed between the slats or frame profiles and fixed. Possible joints are carefully sealed with scraps of the same material or foam.

Facing

It is carried out not only for the purpose of appearance more presentable, but also to prevent damage to the insulation. Another technology is used to apply a layer of polyurethane to the walls. The liquid composition is applied by spraying from special sprayers. Work must be carried out in protective clothing, ventilation is organized in the room.

After application, the composition expands on its own for some time and fills all the bumps and cracks in the walls. Freezing time is about 1 hour. As a result, a textured surface appears, which can subsequently be painted with water-based paints.

A feature of any warehouse is a huge space, which is often simply impossible to heat normally to a temperature comfortable for the staff. Or perhaps, but then the electricity bills will just go through the roof. Therefore, first of all, the warehouse needs to be insulated, get rid of any “cold bridges”, close up all the cracks, think over such a system for loading and unloading goods that will take the minimum time to open and close the gate.

Warehouse insulation

The insulation of a warehouse is different from the insulation of an ordinary residential building: these are both huge spaces and work at height. In addition, not all companies can afford to suspend the operation of the warehouse for some time, and, therefore, work on the insulation of the premises should be carried out at night or right during the operation of the enterprise.

Consider some types of warehouse insulation:

1. Mineral wool. This is classic way, quite cheap and therefore popular. Mineral wool is fireproof and does not rot. Its disadvantages are the high ability to absorb moisture and the high weight of the plates, which can be dangerous for walls organized from thin galvanized steel (hangars).
2. Sprayed polyurethane foam. Recently, this is a very popular method of warming warehouses. Polyurethane foam is not combustible, has low thermal conductivity and high vapor barrier, it is easy and quick to apply, it forms a dense seamless coating without any “cold bridges”. Its disadvantage is the rather high cost, and the impossibility of carrying out work with a functioning warehouse.
3. Sandwich panels. Finished factory panels are very beautiful, strong enough and do not require additional processing. The disadvantage of sandwich panels is the complexity of their installation and high weight, which can create an additional load on the walls and foundation.
4. Styrofoam. Highly cheap way, styrofoam boards are easy to install even when the warehouse is running. The disadvantage is a highly flammable material.

An example of how a warehouse is insulated with polyurethane foam:

See some more examples of such insulation.

Additionally: – “narrow” moment.

Warehouse heating

After the warehouse is insulated, you can also consider the heating system. What we need to know:

1. Warehouse parameters: width, height, length.
2. Required temperature. It is very important to know in combination with the outside temperature - in order to calculate the delta for which we need to warm the warehouse.
3. Heat dissipation coefficient - how the room is insulated.

Warehouse heating systems can be divided into water, steam, air and their combinations (steam-water, water-air, etc.). Let's consider them in more detail.

1. Water heating. A complex and expensive system to install, consisting of heating point, connected to it highways and separate risers with heating appliances. The advantage of this method is uniform and low heating, normal humidity in the room.
2. Steam heating. Provides fast heating of the room, requires a smaller area of ​​heating devices. Disadvantages - complex installation, short service life of the system.
3. Air heating. High efficiency, easy installation, low cost. Disadvantages - large diameter air ducts.
4. Thermal curtains. Help separate warm air inside the room from the cold outside when opening the gates or doors of the warehouse. Air curtains prevent the movement of air masses and allow you to save temperature regime inside the repository.

When heating, there is usually a question of choosing a fuel. The cheapest gas, but also use diesel, gasoline, electricity. Electric heating is generally the safest option with

Thermal insulation of pipes in our country is a practically necessary procedure. The fact is that in winter the air temperature drops quite low. Severe frost can simply "break" the pipe. Probably, it is not necessary to explain that such a nuisance will bring many problems.

Thermal insulation for pipes - The best way protect the pipeline from bursting. Of course, it is better to do it before any problems arise. What to do if the pipes are already frozen? Either defrost them, or replace them, and after that insulate them.

WHY IS PPU THERMAL INSULATION VERY POPULAR?

The most popular material for insulation is polyurethane foam.

Why is he in such demand? The reason for this is its characteristics.

1. Sealed. It does not allow water to pass to the pipes and thereby protects them from icing;

2. Excellent heat retention;

3. Durable. Insulation made from this material can last up to several decades;

4. Easy to install. It is possible to make insulation of PPU pipes within one day;

5. Inexpensive. Unlike many other materials, foam plastic has an affordable price.

Do you need thermal insulation for heating pipes? Contact us!

Why should you contact us for insulation? That's why:

Our company has 7 years of experience in thermal insulation;
Warming for you will be done by highly qualified specialists using modern equipment;
We work with objects of any complexity;

Installation takes little time. Insulation work will be completed within 1 day;
We have certificates and licenses confirming the quality of the materials we use and the work performed;
Warranty for installation and foam - 50 years;
We offer low prices.

Turning to us, you will only need to pay for the material - polyurethane foam, everything else (consultation, calculation of the cost and quantity required material, delivery and installation) we provide free of charge.

Protect your pipes from freezing - order insulation from us.

Insulation of containers and tanks with polyurethane foam

Insulation of containers with POLYURETHANE FOAM

• Installation does not require the use of additional fasteners. PPU is applied directly to the metal surface of the container, making it possible to abandon the traditional frame.
• The polyurethane foam insulation system does not require the use of hydro and vapor barriers, which greatly simplifies installation, increases its speed and reduces the cost of purchasing materials.
• PPU protects the metal container from moisture, thereby reducing the risk of corrosion foci, which allows to increase the life of the structure.
• We recommend installing polyurethane foam insulation from the inside, the minimum layer thickness will not reduce the usable volume of the structure, and the protection of polyurethane foam from sunlight will provide a simple painting.
• Polyurethane foam insulation compares favorably with its environmental safety, which is why its use is recommended for grocery outlets (unlike materials based on fiberglass and mineral wool).

INSULATION OF TANKS WITH POLYURETHANE FOAM

Our company performs thermal insulation of containers for various purposes and tanks throughout Moscow and the Moscow region. PPU spraying is carried out within the minimum period agreed with the customer, while the prices for our services are considered the most optimal in the region. Take advantage of the unique opportunity to get a free consultation on the properties and capabilities of polyurethane foam insulation right now.

Insulation of vegetable stores with polyurethane foam

Types of vegetable stores with PPU insulation

• Vegetable storage facilities based on prefabricated metal hangars and large containers.
• Converted brick and wooden buildings with double or single foam insulation.
• Basement and ground floors industrial buildings, which, with minimal reconstruction, serve as efficient and inexpensive vegetable stores.

6 reasons to choose polyurethane foam insulation

1. The ability to perform insulation of buildings from various materials. Polyurethane foam adheres perfectly to metal, wood, concrete and brick surfaces. At the same time, PPU spraying does not require expensive preparatory work and the installation of supporting frames. Due to this, the cost of building or reconstructing a vegetable store is significantly reduced.
2. The use of high-performance foam application equipment can significantly reduce the installation time of thermal insulation. A professional installer is able to process up to 350-400 m2 of vegetable storage area per shift.
3. PPU thermal insulation has minimal moisture absorption and vapor permeability, thanks to which it is possible to create a microclimate that is optimal for storing various products, while there is no need for additional installation of insulating coatings.
4. Vegetable storage, which is insulated with polyurethane foam, ensures the safety of products both at negative and at high positive ambient temperatures. Separate rooms of the building can be converted into efficient freezers.
5. Warming based polyurethane foam differs in considerable durability, while providing protection from the rays of sunlight (which can be achieved by simply painting the insulation), the operational resource of thermal insulation reaches 30-50 years.
6. Polyurethane foam is distinguished by absolute environmental and fire safety, which is why it is recommended for use in the construction of vegetable stores. The quality of stored products is not affected even by direct contact with PPU.

Why is it profitable to order insulation from us

• Our specialist will visit your vegetable store to determine the scope of work, select the most appropriate technology (internal or external insulation).
• We deliver insulation and equipment necessary for spraying polyurethane foam on our own.
• All preparatory work and installation of insulation are carried out by trained specialists, while the application of polyurethane foam is carried out in the shortest possible time, which is negotiated in advance.
• The vegetable store can be operated within a few hours after the completion of the insulation.

Our main advantage is affordable price, minimum terms and the ability to perform work throughout the Moscow region.
If you have any questions about the insulation of vegetable stores with polyurethane foam, get a free consultation right now.

THERMAL INSULATION OF REFRIGERATION CHAMBERS WITH POLYURETHANE FOAM

Refrigeration plants (industrial cold rooms) must provide a sufficiently low air temperature, creating optimal conditions for storage and transportation of food, medicines, some types of industrial products. If thermal insulation household refrigerator does not cause difficulties, and can be performed using almost any heater, then when installing industrial-grade equipment, it is polyurethane foam that is most often used.

Reasons for choosing PPU for the installation of refrigerating chambers

The choice of polyurethane foam as the main material used for thermal insulation of mobile refrigerators and large-capacity refrigeration units is due to its physical properties and performance characteristics.

• The low specific gravity of the PPU-based insulation makes it possible to mount refrigeration units on the basis of ordinary freight transport; such thermal insulation does not create an additional load on the vehicle chassis.
• Excellent adhesion of polyurethane foam allows it to be applied to almost any original surface. At the same time, the coating obtained is highly resistant to vibration loads that arise as a result of the operation of the installation that ensures the circulation of the refrigerant.
• Insulation with the use of polyurethane foam can be carried out both at the factory and at the place of direct installation of the refrigeration chamber. Thanks to this, the thermal insulation of industrial installations in logistics and shopping centers is carried out by spraying polyurethane foam. The small dimensions of the unit allow you to work both outside and inside the industrial refrigerator.
• Two-component polyurethane foam can be applied in several layers without breaking the solidity of the coating. This allows you to obtain thermal insulation of the required thickness (determined by the calculation of thermal characteristics and the required mode of operation of the refrigerator). In this case, spraying is carried out in a seamless way, which significantly reduces the heat loss of the installation.
• The minimum moisture absorption and vapor permeability of polyurethane foam allows you to create the most optimal microclimate for storing various products in the refrigerator. This significantly reduces the likelihood of condensation on the surfaces of the installation.

Possibility of applying polyurethane foam mechanized way and the minimum thickness of the required coating allows to reduce the cost of production refrigeration equipment. Due to this, the price of a refrigerating chamber with PPU thermal insulation compares favorably with other similar devices of this class.

Advantages of a PU foam refrigerator

First of all, it should be noted that polyurethane foam is absolutely harmless to the human body, in addition, the design of the refrigerator does not imply direct contact of the material with the products placed inside the unit. The use of polyurethane foam provides a number of operational advantages compared to other heaters.

• Thermal insulation made of polyurethane foam is not of interest to rodents, which ensures reliable safety of the structure.
• The thermal performance of the installation does not deteriorate over time. Unlike rolled mineral wool or slabs, PPU does not slip from vertical surfaces. Average term operation of a refrigerator insulated with polyurethane foam exceeds 50 years, while the payback period of the installation at above-average loading is from 2 to 5 years, depending on the working volume.
• To improve the energy efficiency of equipment, double spraying of polyurethane foam (external and internal) is practiced. This technique allows you to provide the necessary thermal performance with a minimum decrease in the working volume of the chamber.
• Insulation with polyurethane foam makes it possible to convert almost any room into a refrigeration unit at minimal cost. At the same time, the main share of the costs will be for the purchase of a refrigeration machine (compressor), the cost of applying PPU (even taking into account the price of the material) is significantly lower.

Our company carries out thermal insulation of any refrigeration units, including handicrafts, with polyurethane foam. We guarantee an affordable cost and an increase in the efficiency of refrigeration equipment after insulation work has been completed.

For information on the cost of work and the features of the use of polyurethane foam, take the opportunity to get an exhaustive free consultation from our specialist.

WAREHOUSE INSULATION WITH POLYURETHANE FOAM

If you are in business, then it is not for us to tell you how important the reliability of storage facilities is. Just imagine that frost hit and all your goods suffered from it. Such situations need to be considered in advance. This will avoid losses.

Insulation of warehouses will help preserve the presentation of your products all year round. This procedure also allows you to save money, since after thermal insulation you will be able to heat your warehouse not as intensively as before. After all, insulated walls retain heat inside the room.

What material should be chosen for thermal insulation of a warehouse?

If you decide to insulate your warehouse, then it is best to choose polyurethane foam for this purpose. It has a lot of advantages:

Ease of installation. Work on insulation using this material will take no more than 1 day. Agree that such terms are quite attractive;

Saving. In addition to the fact that your goods will always be safe, you can save on heating. Insulation of warehouses with polyurethane foam reduces energy costs by 50%. A one-time investment in thermal insulation will help you save money for years to come;

Durability. Polyurethane foam as a heater can last for several decades.

Why insulate a warehouse with our help?

You have decided to insulate your own storage facilities, but do not know who to entrust this work to? Contact MasterPena.

For more than 7 years we have been providing services for the insulation of objects using polyurethane foam. Our specialists have rich experience in this field and use modern equipment.

The MasterPena company takes on objects of any complexity. And the result of its work and the materials used gives a guarantee of up to 50 years. We use only certified polyurethane foam.

All work is carried out as soon as possible - up to 1 day. At the same time, the cost of our work is very affordable. In fact, you only need to pay for the material itself. Its delivery, installation and calculation of the cost of all work are carried out absolutely free of charge.

It is very difficult to heat a warehouse, especially a large one, even if you do not spare money for heating and install a couple of heat guns. Without insulation work, all these attempts will turn into a bunch of wasted money. In order for the staff inside the building to feel comfortable even in the cold season, the warehouse needs to be insulated. You can also find out in a separate article.

Since the insulation does not let in not only cold, but also heat, it will be quite cool inside in summer.

How to insulate a warehouse

Warehouses are insulated, like the rest. The only difference is that the insulation should be as efficient as possible and fit without cold bridges. Remember that through cracks and defects in the insulating layer, money escapes that can be spent on more desired goals. Therefore, the choice of materials and technologies must be approached as thoughtfully as possible.

Unfortunately, for the insulation of warehouses are often offered completely different suitable materials. Therefore, before ordering a service, you need to understand all the options offered. What you definitely should not agree to:

• Various types of mineral wool. Many firms indicate as a plus that these materials have been used for a very long time. Consider whether you need outdated technology. The thermal conductivity of 0.040 W / (m * K) was previously considered excellent, and for this it was necessary to put up with the disadvantages of mineral wool - increased moisture absorption and installation complexity. When used, the facts were even ignored that one type of mineral wool - the so-called glass wool - causes damage to the respiratory tract of the skin and eyes, and the rest of the options contain harmful phenol. Especially dangerous is cheap mineral wool, which smells unpleasantly of phenol and formaldehyde. It is impossible to insulate the warehouse with it - it will be uncomfortable for the staff to be there, and the stored property will acquire bad smell paints and hospitals. Nowadays, when there are more effective, simple and safe materials, it is not worth insulating with mineral wool. Moreover, its active promotion is associated only with the low price of the material and the possibility of obtaining additional profit;

• - Another material often offered for warming warehouses. The panels are two layers of plastic, between which a heater is laid. Sandwich panels are harmless to health and do not emit odors. However, the material has a serious drawback - the complexity of laying, caused by its weak plasticity. Sandwich panels are quite rigid, so it will not be possible to bend them. You have to cut the insulation into small fragments that are interconnected. This leads to the formation of cold bridges at the joints, through which cool air enters the storage room. Another disadvantage of sandwich panels is their high weight, which gives a high load on the foundation and walls. In addition, the sandwich panels are on fire. Therefore, if a short circuit in the wiring occurs in the warehouse, the building will flare up with the release of acrid black smoke;

• - Another super-budget insulation, which is "promoted" by many companies. Even children know that polystyrene burns, and the fire service is aware that when it burns, it releases toxic substances, which will fine the owners of the warehouse. Another disadvantage of polystyrene is its attractiveness to rodents. Mice and rats chew easily soft material and carry it into holes, and sometimes settle in the thickness of the plastic. Such insulation threatens with a constant mouse smell in the warehouse and damage to things that rodents will spoil along with the foam;

• – good material, which has a high energy saving rate, but, unfortunately, is very expensive. In addition, it requires the construction of various crates for laying basalt mats and slabs. Such insulation is more suitable for an apartment, house or office, but not for a warehouse.

What material is suitable for warehouse insulation

An excellent option is insulation by spraying polyurethane foam outside or inside the walls. External insulation is much more preferable, because it allows you to keep the warehouse running. In this case, the dew point - the area inside the wall where water vapor turns into water - does not enter the room. It falls on the thickness of the insulation, where water simply cannot condense. Therefore, with this type of insulation, the walls do not “cry” and mold and fungus do not grow on them.

The disadvantages of external insulation are the impossibility of carrying out in the cold season, with strong wind and high humidity.

If the warehouse urgently needs to be insulated in the middle of winter or it is very rainy in your area, it is better to prefer internal insulation. True, in this case, you will have to unload the entire warehouse, take out all the available valuables and stop work until the insulation and finishing are completed. But, fortunately, polyurethane is quickly applied and dries in a short time. Finishing can be carried out the next day after spraying. Therefore, the warehouse will not remain idle for a long time.

How is the insulation of the warehouse with polyurethane foam

Polyurethane foam (PPU) is a porous insulation formed by spraying from two components. Between the polyol and the isocyanate of which it consists, a reaction occurs, accompanied by the formation of a polymer insulation and the release of a large amount of gas. As a result, during spraying, a porous mass is formed, which increases in volume up to 10 times.

When expanding, polyurethane foam fills cracks, irregularities and voids, forming an even layer without joints and seams. Cold bridges do not form in it either.

Don't be put off by the use of a toxic, flammable isocyanate to produce PPU. The polyurethane foam resulting from such a reaction is completely harmless and neutral, and the air bubbles formed during spraying are filled with the usual carbon dioxide, so they also do not contain any poison. There will be no permanent stock bad smell and harmful fumes. The only thing that will have to be done is to ventilate the warehouse after the work is completed.

From above, the insulation is covered with a layer of material that isolates it from ultraviolet rays that decompose polyurethane foam. If desired, PPU can be covered with siding or special finishing plates.

Polyurethane foam has one of the lowest thermal conductivity values ​​- 0.020 W / (m * K), which is two times lower than that of mineral wool, polystyrene foam and basalt wool. Therefore, the material can be applied in a layer two times thinner than other heaters. This allows you to practically not reduce the area of ​​\u200b\u200bthe room and its height. A small layer thickness is also obtained due to the lack of crates necessary for insulation with roll and plate materials.

This material can also be used to insulate the floor of the warehouse. This technique is much more effective than filling expanded clay between the lags and laying damp cotton wool insulation. PPU is quite durable, therefore, during operation it does not break and does not become covered with cracks.

Together with insulation, floor waterproofing is often done, you can read about this in another article,.

The price can be changed depending on the difficulty of access to the surface.

The minimum order is 30,000 rubles.

The company "Policervis" offers services for the insulation of warehouses with foamed polyurethane. Efficient system insulation allows you to create an optimal microclimate in warehouses and ensure the maintenance of normalized temperature values ​​​​for storing goods or equipment.

Practical insulation for warehouses

The operational properties and installation technology make it possible to consider foamed polyurethane insulation as an effective solution for thermal insulation of warehouses.

The main properties of the heater include:

• long service life;
• water resistance and heat resistance;
• low thermal conductivity;
• rodent resistance;
• 100% adhesion to any kind of substrate.

The polymer material is environmentally friendly and equally effective for external and internal insulation.

PPU installation technology

Foamed polyurethane is applied by spraying using special equipment. This method allows you to create a seamless coating of the required thickness on surfaces of any complex shape. Due to good adhesion, the material is mounted without battens and mechanical fasteners. The time of foam hardening does not exceed several hours. The method of application and the absence of fasteners make it possible to minimize the time losses for thermal insulation.

Insulation of warehouses in Moscow and the Moscow region

By contacting our company, you can make a profitable order for fast and high-quality insulation of warehouses. We have good prices for services and discounts are provided.

home » Hydro vapor barrier » Warehouse insulation. Insulation of industrial, industrial buildings