The best source of information about metal roofing has always been the opinion of practitioners, their feedback on which metal roofing to choose for a roof is collected and carefully compared. After a week of painstaking comparison, you can make a choice. Making the right decision is not easy, as the market is overflowing with offers of all kinds of models and brands of profiled metal for roofing.

Varieties of metal tiles (briefly write)

In order to know what to choose for a roof, it is necessary to freely navigate and distinguish the main characteristics of metal roofing tiles. In a simplified approach, metal tile models are distinguished according to several of the most important criteria:

• profile height. Choosing a material according to the size of the comb is quite simple, since there are detailed recommendations for the use of metal tiles with a certain profile height in specific climatic conditions;
• Surface geometry. The waveform and planes affect primarily appearance roofs.

It is rather difficult to choose a metal tile according to a subjective impression, like it or not. An even bigger problem is trying to describe to the salon manager exactly what the best metal roofing should look like. To get rid of lengthy descriptions of the shape and profile of tiles, manufacturers assign specific trade names to specific varieties.

Important! You should not choose a metal tile, focusing only on the names of models. On each sheet, the manufacturer prints a marking in which the main parameters are “sewn up”, such as wave height, material thickness, color and type of polymer coating.

In total, there are about three dozen different models of metal tiles. If there are no specific preferences yet, but there is a clear understanding of the conditions under which the metal tile on the roof will work, then it is best to choose a coating, focusing on the height of the wave:

• Models for high roofs. Usually the height does not exceed 50 mm. This category includes the mega-popular models Rannilla Monterrey, Weckman TYPE3, Metehe Classic. Very beautiful and fairly flat tiled sheets are placed on roofs with a slope angle of more than 30-35 o. Visually, the models are quite similar;
• Universal profile with a wave height of 50-70 mm. Models such as Planja Victoria Rannila Elit can be used on any roof. High-strength roofs are preferred for wholesale purchase of roof coverings various device and destinations.

In addition to tiles with a standard symmetrical wave, metal coatings with a beveled profile are produced, for example, Accent from the Swedish company Mera Sustem.

High-strength Prima models have a very unusual, non-standard rounded profile.

Exotic lovers can choose metal tiles in the style of oriental roofs, such as Shanghai or Joker.

Selection criteria (here about the thickness, sheet quality, colors, etc.)

Choose the most suitable option it is not difficult for roofing, especially since in most cases managers of building salons make it possible to see the metal tile with their own eyes, and even touch it with their hands. If the issue with the choice of a specific model is resolved, then the less complicated, but more time-consuming part of the work remains - you need to select the characteristics of the roofing material.

The durability of shingles depends on the four most important positions:

• Thickness and quality of metal;
• The presence and effectiveness of the protective sublayer;
• The kind of polymer coating on the front side of the metal tile;
• Ways to protect the wrong side.

Sometimes managers try to convince buyers to choose tiles of the lightest and smoothest textures and colors, motivating their offer by the fact that dark colors, especially red-brown, gray, terracotta, in the tone of wet asphalt, absorb ultraviolet and heat sunlight much stronger than signal blue or bright orange. As a result, according to them, it turns out that the dark protective coating of the metal tile ages faster than that of light colors.

How to choose the color of tiles

In fact, this is just a marketing ploy aimed at forcing the buyer to choose shingles of less popular colors and shades. In reality, the color of the plastic does not affect its ability to withstand the sun.

The exception is blue and purple. It is believed that with the same quality of metal tiles, the roof is blue or blue color will last longer than green or brown. But this effect does not depend on plastic in any way, it's just that in the flow of sunlight, about 80% falls on the range from blue to violet. A person sees a stream of light reflected from the roof. This means that if you choose a blue metal tile, it means that 60-70% of the ray flux is reflected, and only 20-30% is absorbed.

Note! According to statistics, manufacturers produce tiles in more than 50 colors and shades.

Experts recommend choosing a color not according to the degree of absorption, but guided by the color compatibility table. Some salons offer the selection of a color scheme by computer simulation of coloring. This will help you choose the color of the roof to match the color scheme of the facade and walls of the house. True, the price of a metal tile of an unusual color will be higher than if you choose one of the most popular options - red-brown or green.

The quality of metal tiles

The main factor affecting the quality and durability of metal tiles has been and remains the high purity of the metal. The most durable and resistant to corrosion can be considered shingles based on aluminum sheet. The service life of such a roof is at least 30 years, but any large branch broken off from a tree or strong hail can permanently damage the roof, so aluminum tiles are chosen only for buildings with very steep roof slopes.

The best metal roof tile manufacturers use low-carbon structural steel with reduced sulfur and phosphorus content. As a rule, this is a steel sheet with a thickness of 0.45-0.5 mm, produced in Germany or Sweden. All well-known brands prefer to choose European steel, regardless of where they are located, in the CIS countries, Southeast Asia or China.

Russian metal tiles are inferior to Europe in terms of metal quality. It can be chosen for the roofs of cottages or buildings with small slopes. In this case, the roof is easy to maintain, clean and repair, which has a positive effect on the durability of the metal roof coating.

The worst quality and lowest price brands are from China, Malaysia, Indonesia, Vietnam and India. Such metal tiles are sold 30-40% cheaper than Russian ones. Sometimes you can find a Chinese fake of Severstal or Grandline tiles, but you can choose it only for outbuildings, no more.

Zinc and varnish protection

The steel sheet is necessarily coated with zinc, then a primer and a protective layer of polymer are applied. For high-quality roof tiles, zinc protection is applied by welding powder before profiling. The result is a dense continuous layer of zinc with a thickness of 200 microns. Such a sheet can be selected and used as a regular seam roof, but manufacturers go further. A primer is applied over the zinc, and the reverse side is covered with a protective layer of varnish that covers possible damage to galvanized steel after stamping.

Important! For protection according to the first class of zinc, there must be at least 270 g / m 2 of tiles

In some Finnish and German brands, a thin layer of aluminum was chosen instead of a primer, it is sprayed in powder form and alloyed with zinc by heating. This allows you to significantly increase the resistance to scratches. On such a roof you can walk in regular shoes without fear of scratches and swelling of the polymer layer.

In semi-artisanal production, zinc is applied using an electrolyte. As a result, the galvanized coating is porous and sometimes so weak that it can be rubbed off like dust. Many Chinese knockoffs don't even try to use lacquer or zinc, but apply the polymer to brushed and phosphated steel.

Advice! In order not to choose a fake, pay attention to the condition of the lower and upper horizontal edges of the sheet. Usually without zinc, the steel edge rusts quickly along the cut line.

What coating of metal tiles to choose (here only about the coating)

Often advisers and sales managers mislead customers, talking about the benefits and convincing the buyer to choose tiles with a certain type of painting. In fact, the surface of the tile is not painted, but baked from a polymer powder or emulsion. Unlike paint, the coating is smooth, dense, without pores, and most importantly - with a high level of adhesion to steel.

To protect the metal, five types of polymer coating are used:

• Pural, or polyurethane-polyamide powder composition, today it is the best and most expensive protection option. If you choose a pural coating, then the service life of the roof, even in conditions of a continental climate and polar frosts, will be at least 40 years;
• Polyurethane polymer will cost less, its durability is lower than that of pural, but if you choose a metal tile from the average price range, then approximately 80% of the tiles will be coated with polyurethane;
• Polyester coating. It is used for coatings of the middle and lower price range, the service life is 15 years. Differs in poor resistance to edges after cutting the canvas, damage and bare metal have to be treated with protective paint;
• Plastisol based on modified hydrocarbons, it can be chosen for a cold and humid climate, in the sun the plastic quickly burns out and degrades.

The advantage of using plastisol as a coating is the possibility of using a textured surface. Plastic coating of the roof can be made as close as possible to the original - ceramic or clay tiles. In some cases, finely ground mineral powder is added to the polymer composition to prevent oxidation and aging.

Many masters recommend choosing a metal tile with a glossy surface. Such material is more difficult to lay on the roof, but the durability of the gloss is higher, the pressure of snow and ice is less. A roof with a matte surface is recommended to choose mainly for areas with strong winds. Even after powerful dust storms, the roof under textured metal tiles does not change color or reflection.

Rating of metal tile manufacturers by quality (make top 5 or top 10)

You can find a fairly large number of reviews, both from specialists and ordinary handicraftsmen - builders who for the first time faced the need to choose inexpensive and at the same time good materials for the roof. How should one read or rank a metal tile in terms of quality?

In this matter, the opinions of practitioners and theorists agree on one thing, the main criterion is the quality of the metal. You can give a huge number of examples when a metal tile made of German steel was left on the roof without a protective coating and stood the warranty period on a par with the intact Chinese roof.

Finnish tiles

The first place in the rating of metal roof tiles remains with the Finnish Ruukki. The country of Suomi turned into a trendsetter in the standards of metal profiled roofing 40 years ago. Ruuki tiles are now available in both German and Swedish steel. Choosing a very expensive Finnish metal tile for the roof means closing the roofing issue for 40 years. Ruukki is the only company that uses pural for the exterior.

Swedish metal tile

The second place is occupied by SSAB sheet metal shingles. The quality of the metal tile is practically the same as Ruukki, the only difference is a simpler polyurethane coating and better zinc protection. If the house is located near a reservoir, then it makes sense to choose SSAB for the roof, according to experts, the thickness of zinc is 20% more than determined by the requirements of the first class.

European licensed metal tile

The third place was given to the Belgian brand Qarzit. The metal tile is made from Arcelor Mittal steel, the protective coating is supplied by Germany and France. Qarzit is the choice for roofs exposed to severe abrasion and high wind conditions, such as in highlands or steppe areas.

New Russian version of tiles

The well-deserved fourth place is given to the company Metallprofil. Tiles can be selected at a more affordable price and good quality sheet metal from Severstal. The material is thinner than that of the Finns, only 0.45 mm, zinc is also 30% less. Due to additional metal processing, the roofing is thinner, lighter, tougher, but requires a more powerful roof sheathing.

Fifth place

The last line is occupied by products of the company Grandline. Her models, such as Quinta and Cameo, are well known and quite popular in the Russian market. As in the case of Qarzit tiles in the Grand Line, zinc-aluminum alloys are widely used for protection, and the metal tiles themselves are produced on the basis of a cold-rolled sheet.

Conclusion

The idea of ​​using reviews about which metal tile to choose for the roof is remarkable in that you can see the real attitude of the master to the coating, how convenient profiled metal is in laying, and how often one had to regret the choice made.

What is a metal tile - a modern developer does not need to be explained. Everyone is literate, almost everyone is on the Internet. But when it comes time to build yourself, a simple question can be confusing. For example, this: which metal tile is better for the roof. Reviews in some cases will help to make right choice, but I still want to know the correct algorithm for selecting material.

Let's start studying. First, let's remember what a product is.

Those. selection guidelines are already emerging.

1. 1. Since it is a steel sheet, it is clear that the greater its thickness, the better. Usually it is 0.5 mm, and this parameter should be guided by when choosing a metal tile for a roof. If you come across with a thickness of 0.4 to 0.45 mm, it is better not to take them. The first option can still somehow cover the gazebo or canopy, while the second is simply no good.

1. 1. And what metal tile is better for a roof according to the degree of galvanization of the sheet? Here, too, everything is clear. The higher the degree of galvanization, the better the product will be. The normal content of zinc per m² is 275 grams. Anything below is not worth buying.

1. 1. Coating. Which one is better? The choice here depends on many factors. Do you live in the south, where it is always sunny? The option with plastisol will not work. This type of coating will burn out quickly. In general, you should ask the seller which modification is more preferable in your area.

1. But we usually start comparing product types by cost from the very beginning. What metal tile will be better for the price? What type of roofing is best for a roof? There is already an established price range.

• Budget option (economy). 200-400 rubles / m². Sheets coated with polyester, plastisol. The service life is about 30 years.
• The best option is pural, prelaknova. Cost in the region of 400, "survivability" - up to 45 years.
• Premium and elite class - polyvinylidene fluoride and composite coating. The price is about 500-800 rubles / m², the service life is 60-70 years.
• The most popular products are Monterrey, Spanish Dune, Ruukki, Takotta and Cascade.

Which specific type will be best for your roof is up to you, based on the foregoing. Plus, it’s nice to read reviews about the material, they sometimes speak better than sellers. After all, our people are meticulous and principled. If he notices a flaw in something, he will definitely put it on public display. Which is what we use.

Reviews of metal roof tiles

Advantages .

• Very attractive appearance.
• The ability to choose almost any color for any.
• Durability and environmental friendliness are noted in most reviews.
• It is possible to purchase the entire roof kit at once: skates, valleys, ebbs, gutters, etc.
• The light weight of the metal tile (up to 5 kg) does not require the use of special lifting equipment during installation.

The disadvantages of metal tiles noted in the reviews.

• Absolute sound transmission. Raindrops are literally drumming on the ears. You have to do soundproofing (mineral wool, etc.).
• Price. Whatever you say, the material is expensive.
• Sheets cannot be bent. At the bend, the protection is broken and corrosion begins.
• Very accurate and clear preliminary calculations are needed. Otherwise, there will be a lot of expensive waste.
• Do-it-yourself installation without certain skills is not recommended. Assembly technology has its own secrets, without knowing which you can ruin everything. So, it is strictly forbidden to walk on the laid coating.
• The material does not have thermal insulation properties.
• Very often in the reviews there is a low rigidity of this building material.
• In addition, condensation forms on its inner surface during temperature changes.

It is worth watching a video of a person with experience.

Reliable roofing is a guarantee that the roof of the house will not leak during rains or snow melt, and the building will remain beautiful for a long time. The better the material is chosen, the longer the roof will not need to be repaired. Metal roof tiles are increasingly used in the construction of private houses. This material has long earned respect and love among the masters, and for good reason, because it has a lot of advantages. But how to choose the right metal tile for the roof? Without certain knowledge about some of the features of the material, this will not work.

This roofing material is a fairly thin sheet of steel, copper or aluminum. They have a special protective layer that allows them to avoid corrosion. Metal tile receives desired shape method of cold pressure and outwardly very similar to conventional ceramic tiles. If you look at the cut of the material, you can note the presence of several layers. This is directly the main sheet of metal, covered with protective anti-corrosion and polymer coatings, a primer layer and a protective varnish.

This material entered the market in the early 1980s. This happened after the company Rannila released a steel profiled sheet for roofing, in appearance resembling ordinary tiles. The material quickly gained popularity, as it was distinguished by excellent decorative data and ease of installation. In Russia, metal tiles appeared in the 90s of the twentieth century.

Main specifications metal tiles:

• sheet width - 118 mm, useful occupies 110 mm;
• leaf length ranges from 50 to 800 cm;
• profile height - 15, 18 or 23 mm;
• the thickness of the metal can vary within 0.4-0.5 mm.

Prices for tiles Ondulin

Tiling Ondulin

You can use metal tiles in a variety of climatic regions, but at the same time optimal conditions are noted in those areas where the environmental impact on the material will be minimal or non-aggressive. The material perfectly withstands temperature extremes from -50 to +50 degrees (less often - up to + 120 degrees).

On a note! If the climatic conditions of the region are quite aggressive, then it is recommended to use metal tiles with a special protective coating. It is also important to follow all the rules for the installation of the material.

Metal tile - a variety of colors

Metal tiles are used for finishing roofs with a slope angle of at least 14 degrees. It is also suitable for decorating roofs with complex shape. The material is successfully used for the construction of private houses, shopping centers, industrial buildings, high-rise buildings, and for the repair of old roofs.

Metal roofing is one of the best options

This is a relatively inexpensive, easy to use and lightweight material - 1 m 2 of metal tiles weighs only 5-7 kg. Due to its low weight, it can significantly affect the cost of creating a roof, because when laying metal tiles, you do not have to use a complex and powerful system of rafters.

On a note! Average term service life of a metal tile, subject to proper installation and proper operation, is 50 years. Warranty periods set by manufacturers vary between 10-15 years.

Advantages of metal tiles as a roofing material:

• simple installation;
• ease;
• a large selection of colors;
• long service life;
• cheapness;
• weather resistance;
• environmental friendliness and fire safety.

The material, of course, is not without drawbacks, among which one can note a low level of sound insulation (which is easy to increase using good soundproofing material during installation), low rigidity, and a tendency to accumulate condensate under the material.

Cold roofing from metal tiles - a sequence of layers

What to pay attention to?

Now in the construction market you can buy metal tiles from a variety of manufacturers - both domestic and foreign. The material is in great demand and it is not surprising that a variety of companies produce it. Of course, their metal tile is of high quality, and choosing it correctly because of the variety of products offered can be quite difficult for an uninitiated person.

When choosing a metal tile, you should pay attention to the following characteristics:

• sheet thickness;
• appearance;
• thickness of the protective coating (galvanization);
• polymer coating thickness;
• warranty periods.

On a note! Metal tiles produced by trusted manufacturers are not much more expensive than those produced under unknown or little-known brands. In general, the difference in price is only 5-10%.

Of course the most quality material produced by companies with extensive experience. You should not stop at a cheap metal tile made by a one-day company. This will allow you not to run into low-quality material, which may not even last the declared warranty period.

Popular brands

Let's see what brands of metal tiles are now in demand in the building materials market.

Table. Manufacturers of metal tiles.

Prices for metal tiles Supermonterrey

Metal tile Supermonterrey

metal thickness

This is an important factor that you should definitely pay attention to when choosing a metal tile. On average, the standard thickness of the material is 0.5 mm, but sometimes a coating with a thickness of only 0.45 mm can be used, which is acceptable if the roof has steep enough slopes and no one will walk on it, and can also be used only for residential construction . But still, in this case, the step of the roof lathing should be minimal.

On a note! The thickness of the metal greatly affects the price of the finished material. The cheaper the metal tile, the thinner the metal used in its production.

It is best to check the thickness yourself when buying a material, since some negligent sellers can sell sheets with a thickness of only 0.45 mm or less under the guise of metal tiles with a thickness of 0.5 mm. Measurements can be made with a micrometer.

Too thin material will not retain rigidity well, it can easily be deformed both during transportation to the construction site and during operation after installation. A metal tile with a thickness of 0.45 mm or more will not deform under the weight of an average person moving along it.

Important! You should not buy metal tiles from different manufacturers, even if they have the same color. The fact is that sheets made by different companies will have different geometries, which will significantly complicate the installation of the material or make it completely impossible.

galvanized layer

A sufficient thickness of the galvanized layer is a guarantee of the absence of corrosion on the roof during its operation. It is galvanizing that is able to protect the base metal from rust. Therefore, the thickness of this layer is very important for metal tiles. The minimum consumption of zinc when processing steel should be about 100-250 g / m 2.

Polymer protective coating

The quality of the polymer-protective layer has a strong influence on the duration of preservation of the beautiful appearance of the metal tile. It will not only provide additional protection for the roof from external influences, but also allow the tiles to retain their original appearance for a long time. The polymer coating must be applied over the entire surface of the material, and must also be resistant to ultraviolet radiation, not fade.

Table. The main types of polymer coatings.

Most often, plastisol (warranty period - from 15 years), polyester (manufacturer's warranty period - 10 years) or pural are used to cover metal tiles. If you have a choice, it is better to stay on a pural metal tile. But you should choose only among trusted manufacturers.

Attention! If a metal tile is purchased, on which the manufacturer puts a low warranty period, then it is better to refuse to buy it altogether.

Color and material appearance

The metal tile can have a different profile shape:

• waves of various heights (up to 70 mm);
• symmetrical waves;
• asymmetric profile shape;
• special exclusive pattern.

Here everyone is free to choose what they like best and most suitable for general style buildings. But when choosing a color, you should pay attention to the following aspects.

1. Climatic conditions. In the southern region, tiles can burn out, even in spite of a high-quality polymer coating. Therefore, the material of light shades is best suited here.
2. The quality of the polymer coating. If it is not sufficiently resistant to external influences, it may begin to burn out in separate sections, due to which the roof will turn out to be spotty.

How to choose the color of metal tiles

Step 1. The climatic conditions of the area are assessed. The fact is that, depending on the color, tiles can significantly affect the heating of rooms inside the house. Light will help keep the house cool, and dark, on the contrary, absorbing heat, will keep the house warm. On dark tiles, even snow melts much faster than on light ones.

Step 2 The color of the metal tile should match the style and color scheme Houses. Well, if it will, as it were, complement the overall exposure. For example, dark gray or black looks great with the dark walls of the house (for example, dark blue), brown or cream tiles - best option for a house made of wood or covered with light plaster. Also, the dark colors of the metal tiles harmonize well with very light walls.

Step 3 The need to decorate the house is also assessed. Tiles can be in harmony with the finish of the plinth, match the color of the door jambs or window openings.

Step 4 A light color can visually increase the size of a building, and a dark one can reduce it. This rule can be successfully applied to roofing.

Step 5 In some areas and localities, neighbors are very kind to general view the streets where they live. And it will not be superfluous to discuss the color scheme with the neighbors.

Step 6 If you have a house project at hand, then when buying a tile, it is taken with you. All proposed material color variations are evaluated on site and compared with the colors presented in the project.

Step 7 The style of the house is also an important aspect when choosing the color and shape of the tiles. For example, a reddish-colored material is best suited to a Spanish-style building.

Video - How to choose a metal tile

The choice of metal tiles is a rather responsible procedure when buying building materials for creating a roof. But provided that all of the above rules are taken into account, the procedure will be quite easy even for novice builders.

The metal tile is a modern roofing material, characterized by high durability and beautiful appearance. In addition, it does not affect human health at all, unlike asbestos-cement slate, and today it is considered one of the most the best materials to cover the roof.

The review presents domestic and foreign manufacturers of metal tiles, which are very popular in the Russian market. The position of a particular company in the ranking was influenced by several factors - technical specifications produced material, recommendations of experts and, of course, the opinions of the owners.

The best foreign manufacturers of metal tiles

4 Weckman

The best combination of price and quality
Country: Finland
Rating (2019): 4.8

The recognizable Scandinavian company, which began its history in the 18th century, has mastered the production of roofing sheets since 1967, and in 1985 Weckman metal tiles already appeared. Made from steel and the highest quality polymer coating, it is “rolled” on Rautaruukki equipment. The resulting products are distinguished by high technical characteristics and comply with the ISO-9001 standard.

The popularity of metal tiles is due to the competitive price, the best anti-corrosion properties, and high resistance to temperature fluctuations. The latter characteristic is very relevant for the conditions in some regions of our country. Products are represented by a wide variety of textures and colors, have a matte or glossy finish. This range allows the consumer to choose the most suitable option for the roof of his house.

3 Pelti Ja Rauta

The largest assortment
Country: Finland
Rating (2019): 4.8

One of the first companies for the production of metal tiles, founded back in 1947, today presents on the Russian market a wide range of products of impeccable quality, thanks to strict control of the production process and the selection of only the best raw materials.

Metal tile Pelti Ja Rauta meets all the necessary requirements - high quality workmanship, excellent appearance, ease of installation on pitched roofs. The roof obtained from this material will have environmental neutrality and high durability - only the manufacturer's guarantee is 40 years.

2 Mera System

Counterfeit protection
Country: Sweden
Rating (2019): 4.8

Since 1983, the Swedish company Mera System has been specializing in the manufacture of roofing and wall coverings from sheet steel. In order to achieve high quality indicators, the production, which is constantly being modernized, uses only the latest high-tech equipment, thanks to which the ISO 9000 certificate has been obtained.

Metal tiles produced by Mera System have a positive reputation in the Russian market due to the best resistance to any aggressive environmental influences. The products are represented by a wide range of coatings for pitched roofs, which also have a different (depending on the class) warranty period. To protect against counterfeiting, all the company's products are marked with a branded brand, which will allow the new owner to distinguish the manufacturer's metal tiles from a cheap fake.

Comparison table of roofing materials

1 Ruukki

The best quality on the market
Country: Finland
Rating (2019): 5.0

Part of the international concern SSAB, RUUKKI is one of the world leaders in the production of roofing materials. It has long established itself in the domestic market as reliable manufacturer the best quality coating for pitched roof, and is in constant demand from the buyer. All products are manufactured on high-tech equipment from prepared steel with a thickness of 0.5 mm, which in turn makes the metal tile not only heavy-duty, but also easy to install.

RUUKKI roofing materials are known for their high resistance to any external influences, thanks to which the warranty period for this product reaches 50 years. The company allocates 20 years for stability and resistance to changes in the appearance of the material, but in fact the properties remain much longer. Durable polymer coatings Pural and Purex, successfully used in the manufacture of metal tiles, are the manufacturer's own unique development.

The best domestic manufacturers of metal tiles

6 Promintech

Photo offset application of a decorative protective layer
Country Russia
Rating (2019): 4.5

For metal tiles, one of the most important evaluation criteria is the thickness and quality of the metal. In its work, the manufacturer uses the best raw materials from two sources: the Lipetsk Metal Plant and the South Korean DongBy Stile. Such roofing material will lie on the roof much longer than the warranty period gives.

In addition to raw materials, the company uses modern high-precision rolling lines, the result of which is the absence of defects in the molding of the product. A balanced pricing policy and assortment attracts more and more new customers. Matte Sunmatt series ( South Korea) and modern technology applying a protective coating Printech Terracotta Burn are able to realize any design solutions- a roof made of this metal tile will definitely be the most attractive in the entire area.

5 Siberian Metal Center

The highest product quality
Country Russia
Rating (2019): 4.6

The products of the Siberian Metal Center company are represented on the market by a wide range of products that are not inferior in quality to imported counterparts, but at the same time have a more affordable price. In the manufacture of roofing material, the manufacturer uses only high-quality galvanized steel from the world's leading manufacturers, which guarantees a long service life of the produced roof coating.

The production of metal tiles is carried out on rolling lines from Russia, Germany and Finland. Such a reserve of production capacity provides not only a large range of products of various sizes, but also allows you to coordinate with the customer the most optimal material characteristics.

4 Metal Profile

The largest selection of protective coatings
Country Russia
Rating (2019): 4.8

For a long time, the factories of the Metal Profile group of companies have been producing metal tiles that meet all European quality standards and at the same time have affordable price. In addition to the excellent characteristics of roofing materials, this brand is distinguished by a variety of coatings and an extensive range of colors, including the best palette of metallic colors.

Depending on the thickness of the galvanized sheet, the products are divided into classes, each of which uses different coatings: Colorcoat Prisma, Viking, Plastisol, AGNETA, Puretan, etc. Not only the appearance of the roof, but also its service life depends on the choice made. In addition to standard sheets, at the request of the customer, the manufacturer also implements individual orders with a sheet length of no more than eight meters.

3 Stynergy

Best metal thickness
Country Russia
Rating (2019): 4.8

For more than 10 years, Stynergy products have been deservedly popular in the domestic roofing materials market. The metal tile of the company is made from the best steel of Finnish and Russian production on the latest equipment. To exclude marriage, all metal products undergo a quality check in our own evaluation laboratory.

In the existing assortment, it is worth highlighting the line with velvet, silk and steel cashmere coatings - this is a unique development of the Russian concern Severstal. The original protective layer is applied to the metal with a thickness of at least 0.5 mm. It is he who provides the metal tile with reliable protection against moisture, ultraviolet rays and mechanical influences. Such a coating, installed on the roof, will retain its original appearance for a long time. At the same time, the manufacturer's warranty for products is up to 50 years, but the actual service life will be much longer.

2 UZKM

The largest assortment
Country Russia
Rating (2019): 5.0

Founded in 2002, the Ural Plant of Roofing Materials offers a wide range of products tailored to the needs of the buyer, and presented various options technical solutions in different price categories. The metal tile of this company meets all the necessary quality standards. The cardinal reduction of marriage in work became possible thanks to strict control on different stages formation of finished products and the introduction of a special staff of quality controllers.

Among the variety of options for the produced roofing material, the manufacturer's novelty - the Sicily metal tile - is especially popular, which is distinguished by the best protection from the effects of natural phenomena and the original appearance in the Mediterranean style. This model is able to maintain its technical characteristics for 50 years.

1 grand line

Best representation on the market
Country Russia
Rating (2019): 5.0

The Grand Line manufacturer, which has already opened eight plants in Russia over a ten-year period of operation, produces PVC and metal products. Use in the process of producing a roofing sheet the latest technologies and high-quality materials allows us to offer the consumer products that meet his expectations in terms of appearance and quality.
The metal tile from the Grand Line company is made of high-quality steel with a thickness of 0.4 to 0.5 mm in a wide range of textures and colors. In the production of most lines this product TwinColor technology is used, when the reverse side of the sheet, made of protective polyester, has one color scheme with front surface. This allows the material to be used not only for arranging the roofs of buildings, but also for creating canopies, gazebos and other open architectural elements. The manufactured products are covered by a written manufacturer's warranty for up to 50 years, which is its best characteristic.

Updated: 09/18/2019 22:30:15

Judge: David Lieberman

*Overview of the best in the opinion of the editors of the site. About selection criteria. This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.

A reliable roof protects from bad weather and maintains a good microclimate in the house. Today, metal roofing is a popular and durable roofing material. To everyone who is under construction or repair, and is also thinking about it, we recommend that you familiarize yourself with the rating the best manufacturers metal tiles, based on customer reviews and product features, which will help you choose products that are suitable for the price and characteristics.

How to choose a metal tile

1. Base thickness. As can be seen from the name of the roofing material, metal is included in the basis of the sheets. Its thickness varies from 0.4 to 0.6 mm. The higher the value, the stronger and stiffer the sheet.
2. Base material. Corrosion resistance and the cost of goods depend on this component. The most affordable is galvanized steel. More expensive - aluminum profile. The pinnacle of durability is the copper sheet.
3. Profile height. The indicator is from 18 to 25 mm. The higher it is, the more load the metal tile can carry (walking on it, a layer of snow, etc.).
4. Lathing step. The location of the profile affects the distance between fasteners. This should be taken into account before purchasing the material. There is a metal tile with a step of 30 cm, as well as 35 and 40 cm.
5. Profiling. This is the name of the type of pattern or relief on the surface. The convenience of snow convergence, strength and design depend on it. Common species are Monterrey, Joker, Cascade, Modern, Andalusia, Shanghai, Banga.
6. Protective coating material and its thickness. Outside, the metal tile is covered with a protective layer that prevents fading from ultraviolet radiation and contributes to additional protection against corrosion. The type of coating depends on the service life and price. It can be polyester (22-27 microns) that can last up to 10 years, or its improved version - matte polyester with an application height of up to 35 microns and a service life of up to 15 years. More expensive types: pural (50 microns, operation up to 30 years), purex (26 microns, but with a service life of 40 years), plastisol - 200 microns with a period of use up to 20 years.
7. Sheet size. A parameter that depends on the dimensions of the roof and affects the convenience and time of laying. The metal tile is 100 cm wide and 50 cm to 8 m long.

What is better metal tile, soft roof, corrugated board, ondulin, slate

Since there are a lot of roofing materials, before studying the rating of the best manufacturers, it is worth looking at the brief advantages and disadvantages of each type of coating. This will strengthen confidence in the correctness of the choice and the justification of the investment.

The best manufacturers of metal tiles

Having finally made sure of the correct choice of material for the roof, let's move on to the rating of manufacturers. This includes both domestic and foreign companies whose products have positive reviews from buyers or craftsmen, as well as attractive characteristics according to experts.

This is a domestic company that has been producing metal tiles since 2008. The manufacturer is already quite well-known within the country and the products are popular not only among ordinary buyers, but also among contractors. The company uses a galvanized steel sheet with a thickness of 0.45-0.50 mm as a base and different types profile and outer covering. In the reviews, buyers especially like the Safari color, which looks original on the roof. There is a wide palette of shades according to the RAL system. The arsenal includes not only classic shapes, but also an unusual 3D cut. The factories use innovative technologies and process automation, which minimizes the rejection of the human factor.

The main advantage of a metal tile is its availability. The manufacturer entered the rating of the best due to the release of relatively inexpensive roofing options with good characteristics. At the same time, the company gives a guarantee from 10 to 30 years, depending on the selected product.

Advantages

• attractive price;
• fast delivery times when ordering on the official website;
• interesting options profile design;
• the surface is resistant to deformation.

disadvantages

• not the highest resistance to corrosion;
• extensions (connectors, H-profile, corner strips) only white or brown;
• There are sheets of different lengths.

Finnish brand known throughout Europe. Now its factories are also located in Russia, and imported products and technologies are involved in the manufacture of roofing. The manufacturer produces the entire set of products for creating a roof, from frames and sheets to hardware and paint cans to cover scratches on metal after installation. The manufacturer has internal system quality and classification of products with the numbers 30, 40 and 50, which is equivalent to the service life of metal tiles in years. To create the outer layer, ordinary and matte pural, purex and polyester are used.

The manufacturer is rated by our experts as the best in quality. There are many positive reviews for metal roofing and almost no negative ones. The products are also innovative. For example, this is one of the first firms that began to produce a flat modular metal tile, more compact and convenient for snow to melt.

Advantages

• minimum service life of 30 years;
• retains an attractive appearance and color for a long time;
• invisible seams create the illusion of integrity;
• reliable overlapping of joints excludes leaks.

disadvantages

• there are many fakes;
• there are only three profile configurations;
• compared to others, the cost is high;
• the pural coating is scratched if you walk in dirty shoes.

The Swedish company has been operating since 1965. The manufacturer began to specialize in the production of metal tiles since 1983, and has gained extensive experience in the manufacture of products from thin steel with a protective coating. Now the assortment of the company includes 34 types of profile, which allows you to choose the material depending on the angle of the roof bevel and the design of the object. Metal tiles are produced in length from 200 to 600 cm. Only European raw materials are used at the plant. In addition to the standard division according to the shape of the goods, the company uses its own classification by style. In the reviews, buyers like the Spain line with the effect of aged tiles and Eva, which conveys the look of natural ceramic tiles.

Our experts added the manufacturer to the rating due to the high protection of goods from counterfeiting with branded markings. Each sheet of metal tile has a company stamp, which gives confidence in the originality of the product and will help you not to waste money by purchasing low-quality goods.

Advantages

• quality control at all stages of production;
• availability of ISO 9002 certificate;
• compliance with Russian building codes;
• a variety of textures that competitors do not have.

disadvantages

• most of the sheets with a thickness of 0.45 mm;
• high price.

This is a domestic manufacturer included in the TOP-200 non-public companies, published by Forbes magazine. Now the concern has 18 factories in the CIS, which employ 4,200 employees. Production facilities are distinguished by the presence of their own laboratory, where metal tile coatings are constantly tested for durability and strength. In addition to conventional galvanized sheets, the manufacturer has aluminum tiles with a service life of up to 50 years. Buyers in the reviews like the views of Montecristo and Monterros, suitable for various architectural styles.

Our experts added the manufacturer to the rating due to the increased tightness, which is given due attention. The metal tile uses a 3D cut that makes the joints invisible. A double groove is made under the vertical overlap, which ensures moisture retention in the capillaries. This design reduces the metal consumption in the lock and helps to save on the cost of production.

Advantages

• there are 77 sales offices in the CIS;
• possible production according to custom order;
• resistance to UV radiation and frost;
• tightness of the roofing sheet.

disadvantages

• it is necessary to strictly observe the distance along the crate - deviations are fraught with streaks;
• a loud pounding of rain is heard in the attic;
• easy to scratch during installation.

Areco

Another Swedish brand with a worldwide reputation, whose products are sold not only in Europe, but also in Asia and the USA. The manufacturer of metal tiles uses rolled steel from the Finnish concern SSAB. The metal is coated with a hot-dip galvanized layer. This reliably protects the base from corrosion, and also keeps the outer layer from cracking. The company uses four types of polymer coating for decoration and additional protection(polyester plain and matte, plastisol and pural).

Our experts added the manufacturer to the rating because its metal tiles resist corrosion better than others. This is facilitated by zinc treatment not only on the outside, but also on the inside, which is done by far for every company. Due to this, the material does not rust from the back, where condensate accumulates. It is worth paying attention to the product when arranging a rear room with a high release of steam from the room (baths, kitchens, swimming pools).

Advantages

• metal tiles are made from European raw materials (steel and polymers);
• light weight creates less load on the frame and walls;
• in addition to zinc, a primer and primer are applied;
• attractive glossy finish.

disadvantages

• a small amount of profile type;
• available in only three colors (cherry, green and brown);
• high price.

One of the oldest Finnish manufacturers of metal tiles, which began its activity in 1947. At first, the company specialized in fireplaces, grills and sauna parts, but already in 1950 it purchased profiled equipment and began to produce metal tiles. In 1961, the company completely retrained to roofing materials. It is now the largest supplier of polymer coated roofing products, with products sold in Scandinavia and Central Europe. Hot-dip galvanizing, passivation, priming and polymer coating are used in production. Product reviews are generally positive, except for those sheets that are coated with PVC.

We added the company to the rating due to the wide range of polyurethane-coated metal tiles, which not everyone can boast of. This layer is more elastic and better tolerates collisions with solid objects, and therefore more reliably protects against mechanical damage. The concern uses two varieties: Polyuretan and Polyuretan Matt. The color scheme includes green, red, brown and gray tones.

Advantages

• in the catalog, you can choose a variety of stamp heights from 13 to 20 mm;
• suitable for roofs with a high slope of up to 45 degrees or more;
• variety of design according to the degree of displacement of the sinusoid;
• marking on each sheet protects against counterfeiting.

disadvantages

• a small selection of colors for additional elements (mostly brown and red colors);
• limited dimensions of the module length 350-400 mm;
• sheets with plastisol serve up to 7 years.

Finnish manufacturer with a history dating back to 1958. This is a family company that carefully guards its reputation and closely monitors the quality of its metal tiles. Rolled metal from such brands as SSAB, Rautaruukki, Corus Plc is supplied to production facilities. To protect the metal, a zinc coating with a layer of 275 g / m2 is used, which is the maximum indicator. At the joints, a double groove is always used to collect moisture and prevent its passage. The reverse side of the flooring is varnished. The quality of goods produced for Scandinavia and Russia is no different.

Our experts drew attention to the manufacturer of metal tiles and put it in the rating due to the production of extra long sheets of 8 m each. This allows us to reduce the number of joints and speed up installation on roofs of a large area.

Advantages

• annual investment in new developments;
• at the joints there is a groove for water drainage;
• metal tile length range from 0.94 to 8 m.

disadvantages

• inconvenient for pronunciation own names of types of metal tiles (Tiilipoymu and Kruunukate);
• little profile variety;
• available for order only red color.

home » Soft roof » What is the best coating for metal tiles. How to choose a metal tile: what to consider