Bituminous roofing - installation price, device, advantages and disadvantages. Soft roofing (single-layer, two-layer, multi-layer flexible tiles) Choice of bituminous roofing

Soft roofing is one of the popular types of roofing. It is successfully used both in the construction of private houses, outbuildings, and for multi-storey buildings. Materials of this group are made on the basis of bitumen and fiberglass. They have such advantages as: ease of installation, increased noise, hydro and heat insulation properties. However, even for repairs special costs not required. And all the work can be done independently.

Roof repair documentation

When carrying out repair work on a soft roof, they are guided by the following documents:

• estimate (work production document). It takes into account all planned repair activities on this roof. For example, dismantling the roof, preparing the base, installing new material and sealing joints, creating a waterproofing layer. The estimate includes the cost of consumables and combustible materials, as well as the cost of their delivery. This document will help to estimate the budget for future repairs and decide whether to carry it out on your own or to provide an opportunity for specialists to do it;
• SNiP (building norms and rules). During repairs, it is important to follow the requirements that are set out in the document SNiP "Repair soft roof» at number 11–26–76. It lists all necessary materials for waterproofing, types of mastic, roofing materials and requirements for the order of work;
• PPR (project for the production of works). This document is important if roof repairs are being carried out. apartment building. It indicates the rationale for the repair work, the results of the survey of the roof, its characteristics, methods of organizing and methods for the production of roofing work.

Types of damage and types of repair

A soft roof needs periodic inspection. It will help to identify all violations of the integrity of the roofing in time and to carry out restoration work in a timely manner. Common problems with soft roofs are:

Swelling of a soft roof may appear as a result of a violation of the technology of laying materials

Moss on a soft roof appears as a result of a violation of laying technology

The delamination of the roofing material can be repaired by sealing the ends and reinforcing the seam with a patch

Soft roofing may crumble after the end of its service life or under adverse conditions of use.

Bituminous shingles can change color over time and even exfoliate.

A preventive examination should be carried out at least twice a year. At the same time, it is recommended to regularly clean the roof from branches, debris and snow. These measures will increase the service life and minimize repair costs.

Depending on the type of damage, there are three types of soft roof repairs:

Local or current - involves the elimination of small defects in the roofing sheet.

Local repair of built-up roofing provides fast restoration of the coating at low cost

Roof refurbishment consists of removing old roofing and installing new roofing material.

Emergency repairs are carried out immediately after an unforeseen roofing violation to avoid even more problems.

Soft roof bitumen

Soft roofing is ubiquitous today. It is easy to stack, so its popularity only grows from year to year. Soft roofing materials can be produced both individually and in rolls, made on the basis of various materials. Another indisputable convenience is that repairs, elimination of deficiencies and the waterproofing process do not require large investments and time. However, first things first.

Features of a soft roof

This type of material is one of the five most popular in Russia. They cover baths, cottages, garages and gazebos. Soft roofing is made on the basis of:

It is bitumen that makes it easy to solve problems in the form of defects, swelling, the appearance of fungus and other troubles. From time to time it is required to check the roof for its integrity and make repairs. How to do this, we will tell in our article.

In addition, the soft roof looks very attractive. Its light weight is also a plus. There is no additional pressure on the base of the roof, building and foundation.

Possible problems during operation

To extend the life of a soft roof, it is necessary to inspect it twice a year for defects, the causes of which can be many. You need to pay attention to:

• delamination at the joints;
• swelling;
• the appearance of cracks and other damage where water could accumulate.

Timely elimination of problems will keep the coating in its original form and extend its service life. High-quality repairs are the key to excellent waterproofing of the roof.

Repair of a soft roof is carried out using bituminous mastic. You can buy it or make it yourself. In addition to repair, bitumen can also be applied:

• for roof waterproofing;
• for sealing seams;
• for carrying out anti-corrosion measures on a metal roof;
• for the manufacture of soft roofs.

However, let's talk about repair in more detail. The fact is that today the market is full of various sealants and mixtures for repairing soft roofs. Anyone can get confused in this diversity. Suppose a defect is found that requires repair. What to do to someone who decides to immediately make repairs? First of all, you need to choose a material.

Bituminous mastic as a material for roof repair

We propose to consider a simple bituminous mastic as a material. Its advantages are as follows:

• it is an economical product;
• material tested by generations;
• repairs are carried out quickly and efficiently.

Characteristics of the material and its advantages

Modified bitumen is a solution of two or more components. Consider the positive characteristics:

• increased elasticity and viscosity;
• resistance to oxidizing agents, alkalis and other aggressive materials;
• withstands elevated temperatures up to +100 degrees;
• not afraid of sunlight;
• withstands low temperatures up to -40 degrees;
• Easy to apply and light weight
• has high strength;
• after application there will be no seams;
• meets all waterproofing requirements.

Thus, the material can be used on any type of roof: single-pitched, multi-pitched, flat, and so on.

Physical properties, especially increased elasticity, allow the hot mortar to stretch, as it is necessary for the master, and after hardening, tighten. There will be no bad consequences from this. The consumption of mastic per 1m2 is extremely small. This is considered to be the most the best quality solution. The problem with many of the materials that people try to replace bituminous mastic with is that they can break down over time when applied to a crack. The crack itself, under the influence of temperature, humidity and the sun, even with mastic, will try to expand. Poor material will simply not withstand this stretch over time.

All mastic for the repair of soft roofs can be divided into two types according to the method of its application:

• cold application;
• hot application.

In addition, today a huge number of roof repair materials are produced in the form of bituminous mastic with various compositions.

In addition to bitumen, the composition may include:

• rubber;
• isobutylene;
• polymer modifier;
• other additives.

In appearance, the mastic is a black homogeneous mixture in the form of briquettes, paste, liquid or thick glue. Depending on the form in which it is produced, the method of its use and the consumption of material per 1m 2 change.

Manufacturers, in turn, also divide all mastic into four types:

1. Polymer cold application (used for almost all types of repairs, including for anti-corrosion treatment).
2. Roofing (used for waterproofing, but the name itself comes from the method of use when applying rolled roofing material to the roof).
3. Rubber cold application (for repair work and sealing joints).
4. Adhesive (functions are similar to those possessed by roofing mastic).

The compositions of different manufacturers differ, however, the main component remains unchanged. long years. This is a modified bitumen of petroleum origin. For increased elasticity, latex and resins based on synthetics are used. The viscosity, which is obtained as a result, affects the consumption of material.

Additionally, we can not say about the minuses of bitumen:

• liquid bitumen can leak, so many manufacturers add various modifiers to its composition;
• in severe frost (below 40 degrees), the material may crack.

To prevent the formation of cracks for roofing in the north of the country, special compounds are used, supplemented with additives. This must be indicated on the label.

The choice of mastic for repair work

When choosing, carefully read the label. Good material must be manufactured in accordance with GOST 30693-2000 or GOST 14791-79. Regardless of whether the bitumen is modified before you or not, you need to check a number of parameters:

• density should be within 1000-1100 kg/m3;
• the expiration date must be indicated on the packaging;
• the seller must provide a quality passport and a certificate of conformity;
• the drying time is indicated on the condition that it is +25 degrees outside (the standard is 24 hours, but if this time is less, then very little solvent has been added to the modified bitumen, which is not very good).

Consumption per 1m 2 is also important for savings. Another question that worries buyers is whether to buy cold or hot mastic? Let's understand the difference between them.

Cold mastic is ready for use. The manufacturer may insist that it needs to be heated slightly, but the maximum temperature will be 40 degrees. It is good because it reduces the time of repair work and is not afraid of moisture. If it has recently rained, and the roof has not completely dried out yet, you can pour cold mastic to eliminate leakage, waterproofing, and repair soft tiles.

The hot applied material is very good, but requires safety regulations. The temperature reaches 150-200 degrees.

In addition to buying ready-made material, you can make liquid hot bitumen yourself.

Self-cooking

To prepare the solution you will need:

• old metal bucket;
• materials for lighting and maintaining a fire;
• bricks;
• bitumen;
• gasoline (if necessary);
• a strong wooden stick for stirring.

First you need to build a fire. Now, hanging a bucket over it, put bitumen in it. The material will slowly melt under the influence of high temperatures. The mixture must be stirred from time to time.

If the mastic is very thick, gasoline is added to it. The consumption of the final product will be small.

Process self-manufacturing and application is shown in the video.

Repair work

Depending on what a visual inspection of a soft roof shows, repairs are divided into:

• emergency (waterproofing process in the presence of leaks);
• small (seal of cracks and seams);
• capital.

For minor repairs, small pieces of roofing material, soft tiles or other material are needed. First, the crack is filled with a liquid solution, then a piece of roofing material is glued, everything is squeezed and a new layer of bitumen is applied on top. For such work, the material consumption per 1 m 2 is minimal.

Emergency repairs require high-quality waterproofing. In case of leaks, it is required to apply mastic under the roofing material, after drying the area with a burner. The same method is used when the seams of the soft roof diverge. The consumption in this case is also small.

Overhaul is the most difficult of all, bitumen consumption here needs to be increased. The process itself can be divided into three stages:

1. the damaged canvas is removed from the roof;
2. modified bitumen is prepared according to the instructions;
3. a layer of waterproofing (special material) is lined;
4. using a solution, the roof is again covered with roofing material.

In cases where water lingers on the roof, it is filled with water without a canvas and this area is marked. After that, the liquid is driven off, the surface is dried and modified bitumen is applied, on it is a roofing material 1 mm thick. Now you can cover the roofing material.

Bituminous mastic - lovely material. Low consumption, efficiency, ease of use and high quality waterproofing have provided him with an impeccable reputation.

Mastic bituminous cold application for waterproofing and gluing roofing material: consumption and technical characteristics + Photo

This article will help you understand what cold-applied bituminous mastic is. What is the difference between cold and hot mastic. Where is it used. How to choose the right material by properties and qualities for the required work.

Bitumen is a hard resin used to make mastic. In order for the material to become plastic, its temperature is increased, which significantly increases the time of work and has a clear drawback - the risk of fire.

For this reason, it is much more convenient to use cold applied mastic. Due to the solvents present in the composition, waterproofing material is in a liquid state and does not require heating to use.

Hot and cold mastics are used to achieve complete waterproofing. The solvent evaporates, the material solidifies. It turns out a high-strength waterproofing layer.

General information about bituminous mastic

There are two types of cold applied bituminous mastic

First view

It is made on the basis of solvents. These are ready-to-work mixtures. Solvent-based mastic is suitable for use at sub-zero temperatures.

This type of waterproofing sets within 24 hours. Complete curing of the mastic and the acquisition of waterproofing properties takes a week.
Typically, this type of material is used in roofing.

The second type of bituminous waterproofing coating

Made on water based- which characterizes the material as not harmful to the environment.
The coating does not have a pungent odor, dries in a couple of hours.

Water-based waterproofing cannot be used at low temperatures. It is also worth storing the material in a warm room.

Bituminous mastic has different modifications

Unmodified waterproofing. The composition does not contain polymers and other components that enhance the properties of the material. For roofs, this view is not suitable, for the foundation it is ideal. The waterproofing applied to the foundation does not experience atmospheric overloads.

Mastic without polymers is not recommended for roofing.

Bitumen-polymer mastic. From the name of the material it is clear that this type of waterproofing is characterized by high performance. Perfectly adapted to a wide temperature range. Very good molecular bond (adhesion), which allows the mastic to be used for gluing roofing material and similar materials.

Bitumen-polymer mastic, due to its qualities, is widely used to cover flat roofs.

Bitumen-rubber mastic. The composition contains a crumb of rubber. It has decent anti-corrosion properties. Used to cover metal structures.

For roofing bituminous - rubber mastic is NOT suitable.

Bitumen-rubber waterproofing, she is liquid rubber- very elastic with high physical and mechanical properties. These qualities increase the wear resistance of the coating. Great for roofing.

Rubber mastic can become an independent roofing. Virtually unaffected by the weather.

The type of mastic is directly related to the components contained in it.

One-component - ready-to-use coating.

Two-component mastic before starting work requires mixing with a hardener. Used for professional purposes. Has good performance.

When using a two-component mastic, it is IMPORTANT to follow the mixing instructions exactly. Incorrect proportions will lead to an increase in the hardening time.

The main advantages of bituminous mastic of cold application

• Reduces waterproofing time
• Mastic can be diluted with a solvent, which will make it the desired consistency
• Service life more than 25 years
• The coating can be applied on surfaces made of different materials
• Easy application.
• Self use

Cons of this material

• High price.
• Bituminous - polymer mastic gives a large shrinkage, which affects the consumption of material.

Application

Bituminous mastic of cold application material consumption:

1. For bonding 0.8 – 1 kg per square meter
2. For waterproofing layer 2 - 3.8 kg per square meter

There are two leading manufacturers in the market:

1. Bituminous mastic TECHNONICOL
2. Bituminous mastic EXPERT

Both manufacturers meet all requirements. There may be a difference in cost. And some nuances, such as material consumption and drying time.

Important to remember. Before applying the mastic, it is necessary to clean the surface of debris, dirt. The area to be treated must be dry. If the surface is porous, it must be pre-treated with a primer.

Bituminous mastic for the roof

In construction, bitumen-based building materials are now often used. In particular, bituminous roofing, bitumen tape for roofing, as well as various polymer-bitumen-based sealants.

Bituminous mastic for roofing has received wide use - it is made on the basis of bitumen, it allows you to simply and efficiently perform waterproofing and repair of the roof. Roofing mastics are well resistant to aggressive environments. One of their main advantages is that they can stretch and shrink without any consequences, they are applied evenly on the roof of any configuration, the work is performed seamlessly. Thanks to these properties, the coating is reliable and durable.

Bituminous mastics used for roofing work are of the following types.

cold application

bituminous mastic expert

Cold bituminous mastic is a ready-to-use composition, although it can be diluted with various solutions if necessary. It can be applied even on a wet coating, which allows you to perform work without special preparation and in the shortest possible time.

hot application

Water based

The most environmentally friendly, because the content of toxic substances in them is minimal. They are easy to use and safe.

Bituminous mastics with special additives and fillers (plasticizers, minerals, etc.) have some specific properties:

Rubber mastic and polyurethane - the most elastic, they include rubber or polyurethane.

• Bitumen-latex - very durable with increased water resistance, contain synthetic binders and mineral fillers (latex, asbestos, fibers mineral wool, modifiers).
• With an oil solvent - does not harden, it is usually used on objects with constant vibration.
• Rubber-bitumen - does not lend itself to stretching, shock and vibration, easily adheres to any surface.

rubber-bitumen mastic of cold application

Rubber-bitumen mastic is more often used for cars, but it is also successfully used for roof repairs.

Now consider the use of various types of bituminous mastics for roof repair.

Soft roof repair

Repair with a patch. Bituminous roof mastic is usually applied by hand with a spatula or brush, sometimes with a spray gun. The surface of the roof to be repaired is cleaned of dirt (rust or old paint you can not clean) and cover with mastic, then apply a patch. Bituminous tape, tarpaulin, etc. can be used for the patch. The patch must be pressed firmly against the surface so that no air gap remains. On top, you can apply another protective layer of mastic.

Roof repair with bituminous mastic and roofing tape. Bituminous roofing tape is commonly used to repair soft rolled roofs. This tape is multi-layered - it has a protective layer of aluminum foil, a layer of bitumen with plasticizers and a layer of polyethylene film. It adheres well to various materials. Good quality tapes do not contain harmful chemical additives, are resistant to tearing and puncture, their protective reinforced surface is resistant to pollution, acids, alkalis and other aggressive environments. Such tapes are very easy to use and do not require special skills to use. We will analyze in detail the method of repair using bitumen tape.

bituminous mastic for soft roof repair

First you need to clean the place of leakage and the space around it from contamination, rinse thoroughly with water or detergent solution, and allow to dry completely. Lubricate the leakage contour with bituminous mastic or primer. Next: remove the protective film from the tape from the adhesive side. Then, using a pressure roller, fix the tape on the roof surface, cut off along the edge.

Flash repair. The roof surface is cleaned, treated with a primer composition, degreased if necessary, cracks are sealed with a moisture-resistant cement-based putty. Next, two layers of mastic are applied, then reinforced geotextile is laid and a protective layer of mastic is laid on top.

Hard roof repair

Repair of corrosive areas. To repair a hard roof, hot mastic is usually used. First you need to clean the rust, clean the surface of dirt, then apply a layer of hot bituminous mastic.

Repair with a patch. First, we prepare a patch of the required size from a dense material (tarpaulin, burlap), then we impregnate it with a mastic composition and fix it in the place to be repaired, leave it to dry well. Then we apply another layer of mastic on top. This method is good to use for sealing interlocking surfaces.

Approximate consumption of bituminous mastic per 1 m

The consumption of mastic depends on its type and is often indicated in the description of the composition.

Hot applied mastics do not shrink much. To apply bituminous mastic with a layer about 2 mm thick, approximately 2.2 kg / m 2 of the composition will be required.

Typically, ready-to-use mastics shrink and about 3.6 kg/m 2 of composition is needed to create a 2 mm layer.

consumption of bituminous mastic per square meter

If necessary, to reduce consumption, the composition can be slightly diluted. So how to dilute the bituminous mastic? Bitumen mastic can be diluted with white spirit, solvent, toluene, kerosene, etc. For safe dilution, you need to carefully read the manufacturer's instructions for working with the composition.

Bituminous sealants for roofing

In some, especially in problematic or hard-to-reach areas of the roof, it is better to use specialized sealants to better achieve the waterproofing effect. Bituminous roofing sealant is a special viscous compound made from modified bitumen. It is quite toxic and is only used for outdoor work. It is well resistant to moisture, ultraviolet, various oils, solvents, gasoline. Bituminous sealant is applied at temperatures above freezing, usually in several coats. For repairing roofs on small surfaces, rubber-bitumen sealant is well suited, because it is vapor- and waterproof, very elastic.

Thus, summing up, we can say that bitumen has been widely used for roofing, as it has very good operational and consumer properties. Bituminous materials of the desired type can be easily bought at the store or made by yourself. They do not require complicated preparations, special tools or great experience. However, when carrying out repair work, some attention should still be paid to their choice. Sometimes different types of roofing can have their own specifics. If you are at a loss with the choice of materials for repairing your roof, then it is better to use only universal quality products. New materials allow you to repair the roof quickly and efficiently.

From this video you can learn more about roof repair with cold-applied bituminous mastic:

Cold applied bituminous mastic - the main points that you did not know about

What is cold bituminous mastic? How is it different from hot, and for what purposes can it be used? I will talk about the main properties of this insulating material and the scope of its application. This will allow you to choose for yourself the most suitable option waterproofing.

Mastic bituminous cold application - universal modern waterproofing material

What is the material

General information

Bituminous mastic is a plastic material made on the basis of bitumen. The latter is a hard resin. Therefore, the bitumen-based mixture is heated before use.

Hot applied mastics are not very convenient to use. The need for heating increases the time of waterproofing work, and also increases the fire hazard.

Therefore, analogues of cold application have recently become more popular. They contain solvents, as a result of which they are sold in liquid form and do not require heating.

In the photo, cold applied mastic is a liquid waterproofing material ready for application.

The principle of operation for such compositions is similar paintwork materials- after application to the surface, the solvent evaporates and the coating hardens. The result is a durable waterproofing layer.

Compound. Bituminous mastics of cold application, depending on the composition, are divided into two types:

• Solvent based. Ready-to-use mixtures that can be handled even at sub-zero temperatures.
  Drying of the coating occurs a day after application. True, the material acquires its final properties only a week after application.
  As a rule, solvents are used in the manufacture of roofing mastic, however, this waterproofing material can be used for other purposes. More about options I will describe the usage below;

Water-based bituminous water-based mixture is environmentally friendly

• Water based. This cold-applied mastic is an aqueous emulsion. As a result, it is odorless and environmentally friendly.
  In addition, the water-based coating dries faster - usually it takes several hours. True, it can only be used at positive temperatures, the same applies to the storage of material.

Modifications. Depending on the initial components that are used in the composition, the material in question is divided into the following types:

• Not modified. These coatings do not contain polymers and other improving additives. Therefore, they are not recommended for roofing, but at the same time they are excellent for waterproofing foundations, where they are not subjected to strong temperature changes and heat;

Unmodified composition can be used for foundation waterproofing

• Bitumen-polymer. Polymers are usually modified bituminous roofing mastic. It tolerates heat and temperature changes well.
  Another of its positive qualities is increased adhesion. Due to this, the composition can be used for gluing roll materials;

The bitumen-polymer coating is not afraid of high temperatures, which allows it to be used for waterproofing flat roofs

• Bituminous rubber. They differ from the addition of crumb rubber to the composition. As a rule, they are used for waterproofing metal building structures, as they have good anti-corrosion properties. For roofs, this waterproofing material is not used;
• Bituminous-rubber. This coating is characterized by increased elasticity, as well as excellent physical and mechanical properties Therefore, it is also called liquid rubber. Such compositions are great for roof repairs.
  In addition, due to their high efficiency, durability and weather resistance, they can be used as an independent roofing.

Before applying a waterproofing coating, regardless of its type, the surface must be carefully prepared - cleaned of foreign debris, dust and dirt, and then dried thoroughly. In addition, it is desirable to pre-apply a bituminous primer.

Depending on the number of components, bituminous coatings are divided into two types:

• One-component. Represent a completely ready-to-use coating;
• Two-component. Must be mixed with hardener before use. These compositions are professional and have higher characteristics.

When mixing the two components, it is extremely important to maintain the correct proportions, otherwise the hardening time of the coating may increase dramatically. Instructions for mixing the components are available on the package.

Key qualities

As I said above, unlike hot bituminous mastic, the analogue for cold application is convenient to use and speeds up waterproofing work. But besides this, it has many other advantages:

• Possibility of obtaining any consistency. To do this, the required amount of solvent is added to the composition;
• Durability. This quality applies primarily to modified compositions, the service life of which exceeds a quarter of a century;

Modified bituminous mix can last over 25 years on a roof

• Versatility. Mastic can be used for waterproofing a wide variety of surfaces;
• Ease of application. The coating is easy to apply with your own hands using a roller, spatula or brush.

disadvantages. The disadvantages include only a higher cost, the bituminous polymer mastic is especially expensive. In addition, this waterproofing shrinks more strongly than its hot-applied counterpart, which increases its consumption.

The consumption of mastic depends on the type of work. Bonding usually requires 0.8 to 1 kg/m 2 of coating per square meter. To create a waterproofing layer per square meter, it takes 2 to 5 kg of the composition.

%D0%96%D0%B8%D0%B4%D0%BA%D1%83%D1%8E%20%D0%B3%D0%B8%D0%B4%D1%80%D0%BE%D0%B8 %D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D1%8E%20%D0%BD%D0%B0%20%D0%BE%D1%81%D0 %BD%D0%BE%D0%B2%D0%B5%20%D0%B1%D0%B8%D1%82%D1%83%D0%BC%D0%B0%20%D0%BF%D1%80 %D0%B8%D0%BC%D0%B5%D0%BD%D1%8F%D1%8E%D1%82%20%D0%B4%D0%BB%D1%8F%20%D0%BF%D1 %80%D0%B8%D0%BA%D0%BB%D0%B5%D0%B8%D0%B2%D0%B0%D0%BD%D0%B8%D1%8F%20%D1%80%D1 %83%D0%BB%D0%BE%D0%BD%D0%BD%D1%8B%D1%85%20%D0%BC%D0%B0%D1%82%D0%B5%D1%80%D0 %B8%D0%B0%D0%BB%D0%BE%D0%B2

%D0%9E%D0%B1%D0%BB%D0%B0%D1%81%D1%82%D1%8C%20%D0%BF%D1%80%D0%B8%D0%BC%D0%B5 %D0%BD%D0%B5%D0%BD%D0%B8%D1%8F

%D0%9A%D0%B0%D0%BA%20%D0%BF%D1%80%D0%B0%D0%B2%D0%B8%D0%BB%D0%BE,%20%D0%BF% D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5%20%D0%B1%D0%B8%D1%82% D1%83%D0%BC%D0%BD%D1%8B%D1%85%20%D0%BC%D0%B0%D1%81%D1%82%D0%B8%D0%BA%20%D0% BE%D0%BF%D1%80%D0%B0%D0%B2%D0%B4%D0%B0%D0%BD%D0%BE%20%D0%B2%20%D1%81%D0%BB% D0%B5%D0%B4%D1%83%D1%8E%D1%89%D0%B8%D1%85%20%D1%81%D0%BB%D1%83%D1%87%D0%B0% D1%8F%D1%85:

%0A
• %D0%94%D0%BB%D1%8F%20%D0%BA%D1%80%D0%BE%D0%B2%D0%B5%D0%BB%D1%8C.%20%D0%9C%D0%B0%D1%82%D0%B5%D1%80%D0%B8%D0%B0%D0%BB%20%D0%BF%D1%80%D0%B8% D0%BC%D0%B5%D0%BD%D1%8F%D0%B5%D1%82%D1%81%D1%8F%20%D0%BF%D1%80%D0%B8%20%D0% BE%D0%B1%D1%83%D1%81%D1%82%D1%80%D0%BE%D0%B9%D1%81%D1%82%D0%B2%D0%B5%20%D0% BC%D0%B0%D1%81%D1%82%D0%B8%D1%87%D0%BD%D1%8B%D1%85%20%D0%BA%D1%80%D0%BE%D0% B2%D0%B5%D0%BB%D1%8C%20%D0%B8%20%D1%80%D0%B5%D0%BC%D0%BE%D0%BD%D1%82%D0%B5% 20%D0%BA%D1%80%D0%BE%D0%B2%D0%B5%D0%BB%D1%8C%D0%BD%D0%BE%D0%B3%D0%BE%20%D0% BF%D0%BE%D0%BA%D1%80%D1%8B%D1%82%D0%B8%D1%8F.%20%D0%9A%D1%80%D0%BE%D0%BC%D0 %B5%20%D1%82%D0%BE%D0%B3%D0%BE,%20%D1%81%D0%BE%D1%81%D1%82%D0%B0%D0%B2%20% D0%BF%D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D1%8F%D1%8E%D1%82%20%D0%B4%D0%BB%D1%8F% 20%D0%BF%D1%80%D0%B8%D0%BA%D0%BB%D0%B5%D0%B8%D0%B2%D0%B0%D0%BD%D0%B8%D1%8F% 20%D0%BC%D1%8F%D0%B3%D0%BA%D0%BE%D0%B9%20%D1%87%D0%B5%D1%80%D0%B5%D0%BF%D0% B8%D1%86%D1%8B%20%D0%B8,%20%D0%BA%D0%B0%D0%BA%20%D1%8F%20%D1%83%D0%B6%D0%B5 %20%D0%B3%D0%BE%D0%B2%D0%BE%D1%80%D0%B8%D0%BB%20%D0%B2%D1%8B%D1%88%D0%B5,% 20%D1%80%D1%83%D0%BB%D0%BE%D 0%BD%D0%BD%D1%8B%D1%85%20%D0%BF%D0%BE%D0%BA%D1%80%D1%8B%D1%82%D0%B8%D0%B9;
%0A
• %D0%93%D0%B8%D0%B4%D1%80%D0%BE%D0%B8%D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D1 %8F%20%D1%84%D1%83%D0%BD%D0%B4%D0%B0%D0%BC%D0%B5%D0%BD%D1%82%D0%BE%D0%B2.%20%D0%92%20%D1%8D%D1%82%D0%BE%D0%BC%20%D1%81%D0%BB%D1%83%D1%87%D0%B0%D0%B5 %20%D0%BF%D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5%20%D0%B1%D0 %B8%D1%82%D1%83%D0%BC%D0%BD%D1%8B%D1%85%20%D1%81%D0%BE%D1%81%D1%82%D0%B0%D0 %B2%D0%BE%D0%B2%20%D1%82%D0%BE%D0%B6%D0%B5%20%D0%B4%D0%BE%D1%81%D1%82%D0%B0 %D1%82%D0%BE%D1%87%D0%BD%D0%BE%20%D0%BE%D0%B1%D1%88%D0%B8%D1%80%D0%BD%D0%BE %20-%20%D0%BE%D0%BD%D0%B8%20%D0%BC%D0%BE%D0%B3%D1%83%D1%82%20%D0%B8%D1%81% D0%BF%D0%BE%D0%BB%D1%8C%D0%B7%D0%BE%D0%B2%D0%B0%D1%82%D1%8C%D1%81%D1%8F%20% D0%BA%D0%B0%D0%BA%20%D0%B4%D0%BB%D1%8F%20%D0%B3%D0%BE%D1%80%D0%B8%D0%B7%D0% BE%D0%BD%D1%82%D0%B0%D0%BB%D1%8C%D0%BD%D0%BE%D0%B9%20%D0%B3%D0%B8%D0%B4%D1% 80%D0%BE%D0%B8%D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D0%B8,%20%D1%82%D0%B0%D0 %BA%20%D0%B8%20%D0%B2%D0%B5%D1%80%D1%82%D0%B8%D0%BA%D0%B0%D0%BB%D1%8C%D0%BD %D0%BE%D0%B9%20(%D0%BD%D0%B0%D1%80%D1%83%D0%B6%D0%BD%D0%BE%D0%B9%20%D0%B8% 20%D0%B2%D0%BD%D1%83%D1%82%D1%80%D0%B5%D0%BD%D0%BD%D0%B5%D0%B9).%20%D0%9F% D1%80%D0%B8%D1%87%D0%B5%D0%B C,%20%D0%B8%D0%BC%D0%B8%20%D0%B3%D0%B8%D0%B4%D1%80%D0%BE%D0%B8%D0%B7%D0%BE %D0%BB%D0%B8%D1%80%D1%83%D1%8E%D1%82%20%D0%BD%D0%B5%20%D1%82%D0%BE%D0%BB%D1 %8C%D0%BA%D0%BE%20%D0%BB%D0%B5%D0%BD%D1%82%D0%BE%D1%87%D0%BD%D1%8B%D0%B5%20 %D1%84%D1%83%D0%BD%D0%B4%D0%B0%D0%BC%D0%B5%D0%BD%D1%82%D1%8B,%20%D0%BD%D0% BE%20%D0%B8%20%D1%81%D0%B2%D0%B0%D0%B9%D0%BD%D1%8B%D0%B5;
%0A

Bitumen-based material can be used for horizontal waterproofing of a strip foundation

• Floor waterproofing. It is allowed to use mastic under the screed. In addition, the material is used for waterproofing basement floors, as well as balcony slabs.
  Often this waterproofing is used for bathrooms, garages, etc.;
• Installation of waterproofing pools and terraces. As a rule, liquid rubber is used for these purposes.

Roof waterproofing with the material in question can be carried out provided that the slope angle does not exceed 30 degrees. The exception is liquid rubber, which can be applied to any surface.

Price

The prices shown in the table are valid in the spring of 2017:

Conclusion

We figured out with you what cold-applied bituminous mastic is, what types of it exist, and what qualities they possess. Watch the video in this article for more. If you have any questions - write in the comments.

The construction industry today offers the buyer a huge selection of roofing materials of different price categories and quality. At the peaks of popularity are bituminous sheets made of synthetic fiber. It's comparatively new material, but well proven.

In this article, we will consider the types of bituminous roofs, what are the features of the installation of roofing with soft tiles.

Distinctive features of bituminous roofing

Bituminous flexible roofing is one of the most popular roofing materials. Such an enviable constancy is explained by the unique features of the coating compared to other analogues:

High resistance to UV radiation and complete resistance to decay.

Frost resistance, allowing the use of the material in almost any climatic zone.

Moisture repellency.

Low flammability.

Not susceptible to corrosion of bituminous material and the development of fungal elements.

Excellent flexibility and softness, thanks to which bitumen can be used on roofs of complex geometric shapes.

The unpretentiousness of the roof. All that is required from the owners of such roofs is to inspect the surface from time to time.

The official guarantee from the manufacturer of bituminous roofing is from 20 to 35 years.

Beautiful appearance. Due to the high strength of the powder, the color soft material does not lose over the entire period of operation.

High sound insulation.

Profitability. Raw materials are distinguished by their low price compared to metal or natural tiles, and the minimum amount of waste during installation.

Varieties of bituminous roofing materials.

Today, under the name bituminous soft roof, a whole range of roofing materials is hidden, which are based on bitumen or bitumen polymer. They are divided into 2 main groups: rolled and piece coatings.

Rolled bituminous roofing:

Ruberoid. The material was obtained by impregnating cardboard with soft bitumen. Subsequently, the soft raw material was coated with a particularly strong bitumen to give rigidity and durability.

Uniflex. Refers to modern modified roofing materials. It is produced in different modifications: polymer film, dressing with coarse granules.

Glassine. It is similar in its technical characteristics to roofing material. They do not cover the roofs of houses, most often it is used as a vapor barrier.

Bipole - the basis of the coating is fiberglass, followed by impregnation of bituminous polymer. On the underside, the raw material is covered with a polymer film, on the outside - with a dressing with large granules. Use a soft bipole for sloping roofs of cottages. If the coating is applied for the purpose of repair, one layer is sufficient, if as a new base, a double application is necessary.

Linocrom is a roof waterproofing agent. Made from fiberglass. It is also impregnated with bitumen, but glued.

Piece bituminous roof

To this species material includes soft shingles or it is also called soft roofing. In its structure, it is similar to rolled types of bitumen, but outwardly resembles a classic tile.

The elements are flat soft sheets of small size with figured cutouts along one edge. Today on sale you can find tiles of various shapes - hexagons, simple rectangles, with wavy corners.

1 shingle consists of a reinforcing base not only impregnated with bitumen, but covered with it from 2 sides. A colored mineral topping is applied on top of the coating, which protects the tiles from the effects of sunlight and retains a beautiful appearance for many years. From below, soft bituminous tiles are covered with finer dressing with a special protective film.

Bituminous tiles production technology

Not all bituminous roofing on the market is the same quality. It is known that initially bitumen is a product of oil distillation. But there is bitumen, which is natural, i.e. released during the weathering of oil. Only natural bituminous mass is used to create soft tiles of the highest quality. This coverage is considered elite.

Bitumen in its pure form is not used in the production, it is softened to a temperature of 50 ° C. There is another technology, according to which the raw material is heated up to 90 °C. When heated to extremely high temperatures, the risk of losing the softness and durability of the final product increases. Polymers are added to the heated bitumen, which increase the life of the rabbit up to 30 years.

I use atactic polypropylene or styrene as polymer additives. The first roofing option is recommended for southern regions with large quantity sunny and hot days. At very low temperatures, such a coating loses its flexibility, there is a risk of cracking on rabbits.

A roof impregnated with a styrene modifier is recommended for northern regions with frequent snowfalls and strong winds. But such coverage requires additional protection from burnout. To do this, you can use special protective compounds.

Application area

Bituminous tile roofing can be assembled both on a new building and on an existing structure (the material allows installation on top of the old roofing). Externally flexible tiles have beautiful view, so it looks great on large country cottages and small country houses.

Soft roofing can be used for roofs of complex shape, it is easily mounted even on domed structures.

How to choose a quality bituminous (flexible) tile

Among a large number of manufacturers of soft roofs, it is easy to get confused and choose low-quality raw materials. Experts recommend that when buying, first of all, pay attention to the reinforcing layer. No particles of rot or traces of moisture are allowed on it. By European standards for reinforcement of bituminous soft tiles, it is necessary to use a base made of fiberglass or fiberglass. Fiberglass is 5 times stronger than fiberglass, but also much more expensive.

Important: in technical specifications class 1 material, the reinforcement density index should not exceed 110 g / m2. The optimal indicator according to experts is 125 g/m2, no more!

In addition to the reinforcing layer, it is important to pay attention to the external dressing. It should not fall off when touched by hand. The dressing is not only responsible for the aesthetics of the coating, but also reliably protects the material from external environmental influences.

High-quality bituminous roofing is painted with basalt or slate granules at high temperatures of 800 °C. This method of staining allows the color to remain throughout the entire period of operation. There is no particular difference between the sprinkles. The strength of their adhesion to the bitumen itself is important. The highest quality fixation is provided by fractions of different sizes.

Important: manufacturers allow partial shedding of the roof topping after 1 year of operation. You should not be afraid, the manufacturer takes this fact into account and covers the soft roof with a large number of granules.

Mounting Features

Tiled bituminous soft roofing has a number of installation restrictions. This coating can only be laid on a roof with a slope of at least 12 degrees. This material is not designed for the presence of standing water (there is a risk of leakage). Having chosen such a soft coating for the roof, it is necessary to take the preparatory work responsibly.

Important: lay soft tiles only on a solid crate!

All wooden elements battens and truss systems must be treated with special protective compounds. It is important to remember that bitumen does not spread fire; There will be no fire if a spark hits the roof surface. But if a fire starts in the house, then, unlike clay tiles or metal roofing, bituminous soft coatings burn.

The popularity of flexible tiles confidently relies on the traditional "three pillars" of low-rise construction. This is an attractive price, long-term coverage and extremely simple technology styling.

An important advantage is the ability to cope with the roof of the roof with my own hands. Only for an impeccable result of work, you need to know how bituminous tiles should be laid on the structure to be equipped, which should be taken into account during installation to form the perfect coating.

A flexible tile is one of the varieties of soft roofing, made according to the principle of rolled materials. In terms of technical and technological essence, this is a modified roofing material, improved in terms of strength, aesthetics, and wear resistance.

For ease of installation and the formation of a spectacular look, it is cut into elements with a figured outer edge. They call them shingles, shingles or tiles, they are laid by analogy with wooden roofs according to the fish scale principle.

In the manufacture of flexible tiles, the same technologies are used as in the production of rolled bitumen-polymer roofing options. Several important layers take part in its structure, these are:

• Fiberglass. Serves as the basis of the specified roofing. It is fiberglass that provides high strength, resistance to chemical, atmospheric, mechanical, biological aggression.
• Bitumen-polymer shell. It is welded from above and below onto fiberglass, directly forming the structure of the material and impeccable waterproofing protection. Oxidized and supplemented with polymeric components, bitumen has almost zero moisture absorption.
• External mineral dressing. Processing with granulate from the front side of the roof gives the impression of an expensive natural stone or copper coating. The second role is to protect the outer surface of the material from the external negative that occurs during operation.

The back side of the shingle tiles is sprinkled with sand or covered with a polymer film so that during transportation and storage they do not deteriorate, sintering with each other. Before laying, the film or sand is removed in order to be glued to the base prepared for the roofing device.

Many companies are now engaged in the production of various brands of flexible tiles, including both foreign and domestic representatives. Each of the manufacturers strives to make their own contribution to the process, to create a product with unique properties and technological advantages.

In some, the back side is completely covered with a self-adhesive bituminous composition that adheres the tiles to the base and to each other, in others this substance is applied only in stripes. There are differences, but they are minor.

As a result of laying, the technology of which is not much different from all manufacturers, all types of material under the attacks of UV rays are sintered together into a continuous carpet and reliably glued to the base.

Benefits of using bituminous shingles

Piece flexible roofing is produced in the most extensive color, texture, and decorative variety. In the abundant assortment it is difficult not to find the material necessary for the design.

In addition to the above priorities, justified by manufacturing features, the pros and cons of shingles cut into tiles include:

• Unlimited technological possibilities. Using this type of material, you can equip a roof of any architectural complexity, regardless of the chosen configuration and the size of the slopes. Tiles are easily mounted on bulbous domes, multifaceted tent structures.
• Compatibility. The result of laying perfectly harmonizes with the exteriors of low-rise and high-rise buildings, made in any of the currently in demand architectural styles. Suitable for classics, and for antique styling, and for newfangled design trends.
• Easy installation. Having familiarized yourself with the laying rules, the arrangement of the roof using bituminous tiles can be carried out independently. When contacting builders, it is not necessary to hire a large team; a couple of people can easily cope with the work.

It is impossible not to note the remarkable insulating qualities. Bituminous tiles after sintering under sunbeams form a waterproof carpet that prevents all attempts of atmospheric water in any form to penetrate into the thickness of the roofing system. A flexible roof ideally dampens external noise interference, without letting external sounds into the equipped housing.

Maintainability is rightfully considered a valuable advantage. If one or more adjacent shingles are damaged, it is not necessary to completely remove the roof and lay a new one, it is enough to replace the damaged part of the roof.

It is advisable to replace the damaged area with a material with a similar color and quality, for which it is recommended to stock up on a pack of material from the same series from which the entire roof is composed. However, the appearance piece roofing allows for some variation in color, so it is acceptable to use a slightly different color.

Disadvantages of bituminous piece coating

No matter how hard the developers and manufacturers of roofing, ideal option no roof yet. Flexible shingles similarly have a number of disadvantages, including:

• slope restrictions. The smallest angle of inclination of the slopes for possible laying is considered to be 12º. For flat structures, piece roofing is not suitable, because. before sintering, the tiles have many holes that can let water through. They can cause seepage and interfere with tile bonding.
• The complexity of installation. Despite the simplicity of the technology, installation will still require much more time than when arranging a roof with large-sheet material, for example, profiled roofing sheet or metal tiles.
• Incompatibility with conventional roofing material. It is unacceptable to use traditional roofing material as a waterproofing lining carpet, which is capable of “pulling” bituminous components from the roofing, which ultimately leads to destruction, and in some places to swelling of the roof.

In addition, the working life of a conventional roofing material is significantly less than its improved counterpart, from which flexible tiles are made. It is unreasonable to arrange a base for laying the coating, which will serve less.

Step by step laying technology

The stages of work on the construction of a roofing system with a flexible tile coating are carried out in a standard sequence for all types of roofing. First, the base is prepared, then the markup is carried out, the material selected for the arrangement is laid, additional elements are installed.

The same actions are performed during the installation of shingles, however, there are some technological subtleties that we will now analyze.

Step #1: Foundation Preparation Process

Flexible tiles are laid on a continuous crate constructed from edged or tongue-and-groove boards, moisture-resistant plywood marked FSF or OSB-3 boards. The material for the base device must be consistent in thickness, which is especially important if a board is used.

In the device of the crate, it is necessary to observe the technological gaps required to ensure the linear expansion of the material in case of moisture. Between the boards and plates leave "gaps" of 3-5 mm. The board is laid along the cornice outline, starting from the lower edge of the roof.

Plates are mounted so that the result resembles brickwork, i.e. there should be no cross joints. It is permissible not to leave gaps or reduce their size if the crate is installed in the summer. The thickness of the base for the flexible coating is selected depending on the pitch of the rafters.

A waterproofing carpet is laid along the crate, for the device of which it is necessary to take the material recommended by the manufacturer of the grade of bituminous tiles selected for laying. It has already been noted that the traditional roofing material is not suitable for these purposes. In addition, if it is used, the roof warranty will be voided.

To decorate and strengthen the roof perimeter, metal protection is installed in front of the waterproofing device, these are:

• Cornice planks. Mounted in front of the waterproofing carpet. They are fixed to the crate, staggered every 10-15 cm. Galvanized fasteners with wide caps are used.
• End planks. They are installed above the lining waterproofing along the edge of the gable overhangs. Attach them in the same way.

The standard length of the strips, as a rule, is not enough to install along the entire length. They are lengthened by simply applying the next similar element with an overlap on the previous 3-5 cm. Fasteners in this area are placed after 2 cm.

Stage #2: implementation of waterproofing works

Usually, manufacturers produce all the components for the roof device themselves, including waterproofing lining carpets. They are made from a mixture of bitumen with a polymer, but they are made thinner than the coating itself, and do not use granulate for sprinkling.

The specifics of the waterproofing lining device depends on the steepness of the structure, if:

• Slope within 12-18º. They arrange continuous waterproofing protection with preliminary fastening of duplicate waterproofing in areas where the likelihood of leakage is greatest, which include all convex and concave corners of the structure, cornices, penetrations, gable overhangs.
• Slope over 18º. Waterproofing protection is placed only on areas of possible leaks - those very curved and convex corners, i.e. in the valleys, along the hip and ridge ribs, along the cornices, along the gable overhangs and around the passages of communication pipes through the roof.

In the first case, a continuous waterproofing carpet is laid in horizontal stripes, starting from the cornice line. Before laying it, waterproofing of problem areas is reinforced with self-adhesive water-repellent material.

The waterproofing itself is laid horizontally, in longitudinal panels, so that each overlying sheet overlaps the previous one by 10 cm. As a result of this arrangement, moisture ingress into roofing system. In the longitudinal direction, the overlaps are 15 cm.

In the second case, the insulation is glued fragmentarily. Self-adhesive roll material is laid along the cornices and the line of valleys, at convex corners and along the gable overhangs it is permissible to use protection with less waterproofing properties, to stick a water-repellent lining on bituminous mastic.

At the intersection of sewer, ventilation, chimney pipes and other communications, a lining carpet measuring 1 × 1 meter is glued.

Stage # 3: marking the roof before laying

Marking is necessary to speed up the laying process, facilitate and systematize the work of the roofer. At this stage, it is most convenient to think over and adjust the roof, because. most often, there are still some deviations in the geometry of the equipped slopes both vertically and horizontally.

The markings are made with coated construction cord. The lines drawn with it are not a strict guideline for roofers, they only outline the general direction and do not allow them to stray from it when performing laying work.

Lines are "drawn" along and across the ridge ribs. The pitch of the longitudinal marking is equal to the width of the bituminous shingle. Horizontal guides beat off 5 standard rows, this is approximately 80 cm.

During marking, you should decide from what point the fastening of flexible tiles will begin. It all depends on the length of the slope, on the shape and size of the curly teeth of the outer edge of the bituminous tiles.

On slopes of impressive length, shingles are laid from the center. This makes it easier to align the row if there is a possibility of horizontal displacement of the piece roof. For the correct laying of bituminous tiles on short slopes, it is necessary to calculate in advance how many uncut elements will lie on the surface in order to reduce cutting.

Step #4: Installation of shingles

Consider the procedure for laying bituminous tiles using the example of working with Shinglas material, a product supplied to the market by TechnoNikol. In her assortment, materials varied in tone with symmetrical and asymmetrical external teeth.

Depending on the series of coating, the tiles in their upper part are either glued to the mastic or attached with adhesive back side. In the second option, it is not necessary to use mastic for fixing ordinary tiles; it is enough to detach the protective polymer film and attach the shingle to the required place.

Each tile must be nailed. Ordinary tiles are fixed to the prepared base with roofing nails with wide caps that ensure reliable fastening of the flexible material. The number of fixation points depends on the steepness of the structure.

Nails are hammered clearly perpendicular to the base, deviations are unacceptable. They are placed at a distance of 2-3 cm from the edge. The serrations of the row laid over cover and mask the attachment points of the underlying tiles, thanks to which they are hidden from view and protected from rust.

Before proceeding with fixing the flexible tiles, the starting strip is laid. It is used in finished form, specially produced for finishing cornices with skates, or they are made independently by cutting off curly protrusions-petals from ordinary bituminous tiles.

The flexible shingle is laid with an offset in each subsequent row so that the overlying petal is just above the joints of the two underlying ones. It is necessary to shift, but there are no clear requirements for the selection of a pattern, the main thing is to close the fixation points.

Regardless of the features of the series, it is customary to lubricate the extreme tiles with bituminous mastic by a minimum of 10 cm. This is necessary to protect the roof from heavy rains.

Flexible tiles cover the entire surface of the slopes, not reaching the edge of the hip ribs and the ridge ridge by 0.5 cm.

Stage # 5: arrangement of valleys, junctions, ridge

Like any other type of coating, shingles require decorative and protective design. It will give aesthetic completeness to the roof, as well as protect its edges from the penetration of atmospheric phenomena dangerous for the roof.

The valleys are equipped in an open and closed way. According to the first, the tiles are simply laid on top of the waterproofing carpet laid in the groove as usual. However, the edge of the tiles falling into the valley is not fixed or nailed, not reaching the axis of the valley by about 30 cm.

After laying the flexible tiles completely on adjacent slopes, two parallel lines are beaten off with a coated cord, in accordance with which the excess coating is cut. The distance between the lines is from 5 to 15 cm, depending on the slope of the slopes. Narrow grooves are arranged on steep roofs, wide - on gently sloping structures.

According to the second method, tiles are first placed on a gentle slope, while they go onto an adjacent steep surface by about 30 cm. The upper corner of each laid tile is additionally fixed with nails.

After arranging the entire slope, the line of the upcoming undercut is beaten off with a coated cord. It is carried out at a distance of 7 cm from the axis of the groove. Flexible shingles on a steep slope are placed taking into account this line, cutting them in the process of fastening. To improve the fastening of cut tiles in places that do not have an adhesive back, they are smeared with mastic.

Connections are equipped using wooden lath, unraveled along the length along the diagonal. The size of its wall is 5 cm. The triangular rail is nailed along the line where the roof meets the walls, with a ventilation shaft, brick pipe etc..

Before arranging, brick surfaces are plastered and coated with a primer. After laying the slats, the waterproofing carpet is glued so that one edge of it extends at least 10 cm onto the vertical surface. The second edge is glued to the horizontal surface.

Metal strips are placed on top of the roof at the junctions, the upper shelf of which is buried in brick wall by about 1.5 cm. To do this, choose a strobe, and after inserting the plank into it, the entire space in this “groove” is filled with a sealant.

To equip the exit points of the antenna and ventilation pipes, specialized elements are produced that seal the passage. Their use greatly simplifies the work of the roofer and speeds up the procedure.

Arrangement of hip and ridge ridges is carried out using ridge-cornice elements, divided into three tiles along the perforation line. You can use ordinary tiles by cutting off the petals from it, and then also cutting it into three parts.

Before attaching the spinal trim, the outline of it is traditionally beaten off with coated cord. Tiles bent in half are laid on the side opposite to the prevailing winds in a particular area. Each previous one is superimposed on the next one. The overlap must be at least 5 cm.

As a result of fixing the back plates, their open part must be turned along the direction of the wind. So that the gusts do not “shaggy” the flexible tiles and, as it were, flow in his direction.

On the hip roofs first, convex corners are equipped, the tops of which are closed with a ridge assembled from the shingle. On roofs arranged in the manner described, ventilation is provided by the installation of aerators.

If it is planned to build ventilation through a ridge rib, then it is closed with a ridge aerator. Instead, two boards connected at an angle can be used, on top of which spinal tiles are attached.

A visual guide to the installation of flexible bituminous shingles will help you thoroughly understand the technology:

Bituminous coating deserves close attention of the owners of suburban property. It looks great, lasts a long time, protects reliably roof structure. The information we offer will help you to carry out roofing work on your own and to control a team of hired builders.

bituminous tiles Ruflex is made in Russia on Italian and American equipment from Russian raw materials. In the collections - 6 pattern options, 19 colors. Inner side with self-adhesive layer for easier, more secure installation.

Tegola- Italian flexible roof impregnated with APP-modified bitumen. For the basalt layer, granules of different fractions are used, painted using the firing technology, ceramization, so that the surface retains its original color and appearance longer.

price from rub./m 2

flexible roof Doke Pai produced in Russia according to German technology with strict quality control. The company offers 12 collections and auxiliary materials for paving. Docke Pie is a reliable, durable roofing system.

flexible roof Roof Shield manufactured in Russia using SBS-modified bitumen. Complies with GOST, production is certified according to ISO 9001:2001. Roofshield offers 4 forms of cutting, an extended palette of colors.

price from rub./m 2

Bituminous tiles - roofing from individual sheets (shingles). It is moisture resistant, not subject to corrosion, UV rays. The material is laid on a solid flooring made of plywood or OSB-3 using underlayment carpets and other accessories.

Structure

Flexible roof - multi-layer material:

• fiberglass. It is the basis, reinforces the layer of bitumen. Does not increase the weight of the material, does not rot, is not subject to corrosion;
• bituminous layer. It impregnates fiberglass on both sides, a compound with improved properties is used. It is more resistant to thermal stress, retains elasticity longer and does not crack;
• the outer covering is formed by slate or basalt granules. They are painted in different colors, during production they are evenly poured onto heated bitumen and pressed into it. Granules of different colors form the coating pattern;
• an adhesive layer can be additionally applied to the inner surface. It increases the reliability of installation, improves the fit of the shingles to the base.

Types of bitumen

Characteristics of the bituminous layer determine the durability flexible roofing and its thermal stability. Natural bitumen becomes brittle when cooled and melts when slightly heated. Additional processing of the compound removes these disadvantages:

• oxidation: saturation of the molten compound with air with the additional use of catalysts. Slows down the aging of bitumen, increases its plasticity, increases temperature resistance. Oxidized bitumen is used for economy series of soft roofing;
• the use of SBS-polymers in the composition of the bituminous compound: it greatly increases the temperature resistance, elasticity, and durability of the material. With this modification, the property of self-healing appears: small damage to the bitumen layer disappears over time, without repair;
• modification with APP-polymer: used in the production of flexible tiles abroad (in the Westmet catalog these are Tegola materials). APP polymer is elastic, heat-resistant, and has stable characteristics. Its use increases the operating temperature range of bituminous tiles, allows its installation at a negative temperature.

The bituminous tile can be one - two - three-layer. The more layers in the composition of the coating - the more voluminous and expressive it looks, the longer it lasts. At the same time, with an increase in the thickness of the material, its weight also becomes larger, which must be taken into account at the stage of arranging the truss system.

Benefits of a soft roof

• Resistant to weather conditions. Does not fade in the sun, does not let moisture through, resistant to temperature extremes.
• Strength. It does not collapse under shock loads, it is not damaged by falling branches, debris, etc. on the roof.
• acoustic comfort. Reduces the level of noise penetrating into the premises under the roof from the street.
• Maintainability. Damaged shingles can be replaced without removing the entire roof covering.
• Durability. The service life can reach 100 years.
• Versatility. It is laid on pitched roofs with a slope of 11.3°. With a small angle of inclination, it is additionally recommended to use an underlayment carpet, to equip a solid flooring made of OSB or FSF plywood.
• Simple installation with reliable double fastening: mechanical (screws or nails) and adhesive.

Questions and answers

• What base is needed for shingles?

  Bituminous tiles are laid on a solid flooring, additionally covered with a lining carpet. It is assembled from dried boards, OSB boards or moisture resistant plywood. Westmet engineers believe that it is more convenient to use FSF plywood or OSB - it is easier to assemble an even base from them. The thickness is calculated by the pitch of the rafters, by the total weight of the materials. For OSB, the minimum thickness is 9 mm, but it is better to use 12 mm plates (they hold fasteners more securely). When using boards, the flooring must be treated with fire protection and dried well before laying the coating.

• How much does a flexible roof weigh?

  The average weight of 1 m 2 of a single-layer bituminous tile is 8-9 kg for the laid material. A two-layer coating weighs almost twice as much - 17 kg per 1 m 2, a three-layer coating - 24-25 kg / m 2. When calculating the load on the truss system, the weight of the solid flooring (about 7-8 kg / m 2 when using OSB boards 12 mm thick) and the lining carpet (about 1 kg / m 2) are additionally taken into account.

• What affects the service life of shingles?

  Flexible roofing lasts from 15-20 to 60 years or more. Its durability is affected by:

  • used bitumen: SBS- or APP-modified compound retains elasticity longer than oxidized;
  • quality of installation: laying with the use of a lining carpet, with reliable fastening, high-quality waterproofing and ventilation of the roof increases its service life;
  • the number of layers in the composition of the shingle: the more of them, the thicker the coating and the more reliable it is.

• What is the difference between single-layer and multi-layer flexible roofing?

  The coatings differ in the structure of the shingle: in the manufacture of a two- or three-layer material, several of its layers are glued together. It becomes more voluminous, imitates natural coatings more accurately, is better protected from mechanical damage, and its service life is longer. The weight of a multi-layer flexible roof is increased compared to a single-layer one (the difference is a multiple of the number of layers), and this may require strengthening the truss system and a solid base.

• Why do you need a lining carpet for shingles?

  When installing a flexible roof, the lining carpet is laid over the entire area of ​​\u200b\u200bthe slopes or along their perimeter, at the joints, in areas where the risk of leakage is increased. It provides additional waterproofing of the roof, levels the solid base, improves the quality of installation. The flexible tile laid with its use lasts longer, looks neater. Often, when using it, manufacturers give an extended warranty on the coating.

If you have ever been involved in the construction or repair of a private house, then you have definitely come across a choice of quality building materials. Sometimes it can be very difficult to decide what material to choose for the roof of a private house. The main roofing materials that are used today in private housing construction are metal tiles, roofing corrugated board, seam roofing, composite tiles, slate and soft tiles. In this article, we will take a closer look at soft bituminous shingles. It is also called flexible tiles for its plasticity.

The popularity of this type of coating is associated with a variety of colors, shapes and its wide design possibilities. Great for complex roofs. It consists of a base (fiberglass, thick cardboard or cellulose cloth), a bituminous binder and an inorganic colored dressing.

Types of soft roof

Characteristics of shingles:

Soft roof consists of several layers:

• Foundations- fiberglass, thick cardboard or cellulose cloths.
• bituminous binder- may include several types of bitumen. The most popular are oxidized, SBS-modified bitumen, PM-modified bitumen and APP-modified bitumen. Oxidized bitumen is artificially aged bitumen. Its main feature is its highest heat resistance (up to 120 degrees). SBS-modified bitumen - artificial rubber is added to the bitumen mass. It improves the flexibility of the material and strength at low temperatures. APP-modified bitumen - atactic polypropylene is added to the bitumen mass. This type of bitumen is able to withstand high temperatures, it is plastic, has good adhesive properties.
• Colored mineral chips- its main task is to protect bitumen from environmental influences.

Among other things, soft tiles are distinguished by the options for cutting sheets:

• rectangle
• shingles
• hexagon
• "brick"
• "beaver tail"
• "dragon tooth"

Benefits of soft tiles

• Possibility of use when working with complex shapes roofs
• The properties of this material do not change under the influence of temperatures.
• Light weight, which greatly simplifies installation and facilitates transportation
• fire safety
• With the correct calculation of the material, a minimum amount of waste remains after installation, which reduces costs
• Soft tiles - moisture resistant material
• Doesn't make noise in rain or hail
• If necessary, it is possible to make local repairs
• Widest range of designs and colors

Prices in the online store

Comparison table with manufacturers

For proper installation, it is necessary to purchase component materials for a soft roof:

• OSB3 (OSB-3) - oriented strand board with moisture resistance class 3. Designed for external construction work.
• Ridge-cornice tiles
• roofing nails
• Ridge aerator
• Snow guards for shingles
• Valley carpet
• Underlayment carpets
• mastic
• metal slats

You can find all these materials on the website of the Grand Line company, as well as in our online store.

Five advantages of cooperation with Grand Line

• Quality. All materials presented for sale on the company's website are carefully checked for quality.
• Warranty. Grand Line provides a written guarantee for all types of products.
• Specialists. For any question, you can contact the employees of the company. They will calculate the cost and quantity of the required materials, help you decide on the coating and color, place an order and delivery.
• Choice. The company provides the widest range of products for every taste.
• Delivery. We carry out transport and courier delivery in Moscow and throughout Russia.

It is difficult to say unequivocally which roofing material is the best. All of them are good in one way or another. When choosing, it is worth starting from the budget, type of construction, color preferences and installation method. It is necessary to take into account the costs of building a reliable truss system, on which the final roofing material will be laid, as well as to include the cost of additional elements in the estimate. Choosing soft tiles, you can be sure of the quality and reliability of this material. It will give your home a nice finished look.

home » Accessories » Bituminous roofing - installation price, device, advantages and disadvantages. Soft roofing (single-layer, two-layer, multi-layer flexible tiles) Choice of bituminous roofing